Presence and IntComm WG

["Jeff King" <>]

The version of code from the Wave Three Software web site is the
released version v2.1.5.  This version does not include the
functionality I have referenced earlier including GSM, h.261, h.6, IM,
etc. 

The version we are making available for PIC includes this functionality
in a "un-released" version.  I believe that Ben was going to post the
code on an I2 server, but in the meantime you can download from the
following:

Windows 2000/XP
http://www.wave3software.com/downloads/special/Session2004.03.18.12.04.e
xe

OSX
http://www.wave3software.com/downloads/special/Session2004.03.18.16.34.b
in


When prompted, you can use the following registration key:
sesdem pic882 000001 wsxxxx 000001 bs7d3n

Let me know if you have any questions.

Thanks,
Jeff

Jeff King
Wave Three Software
435-787-0555 x103



-----Original Message-----
From: Xiaotao Wu 
[mailto:]
 
Sent: Thursday, April 15, 2004 8:38 AM
To: 

Subject: [wg-pic] GSM in Session

I just downloaded Session from Wave3 web. I did not see GSM codec in the
codec selection list. Where I can find the Session with GSM support?

-Xiaotao

===========================================================
Name      : Xiaotao Wu
Email     : 

Homepage  : http://www.cs.columbia.edu/~xiaotaow
Phone     : (212)939-7054,  Fax: (801)751-0217
Phone-PC  : (212)939-7133
SIP       : 
sip:
Office    : Room 506, Mudd building, West 120th
===========================================================

On Thu, 15 Apr 2004, Steve Blair wrote:

>
>   Does Cisco support calls from IP to PSTN using anything other than
> G.711u or a-law codecs on the 2600 series boxes? I didn't think they
> did but this belief is based on very basic testing on my part. I have
the
> codec complexity, codec prefence list and dial-peers setup to select
> the codec with g.711a/u law always last yet only these two codecs
> work for calls to the PSTN.
>
> -Steve
>
> Jamey Hicks wrote:
>
> > Steve Blair wrote:
> >
> >>
> >>  2.38 has been installed. Calls to MIT fail for me too now :-)
Calls to
> >> sip:
> >>  and 
> >> sip:
> >>  (me) work
> >> properly.
> >>
> > I've seen this sort of behavior with other UAs calling through Cisco
> > 2600 with codecs other than G.711 advertised by the UA.  I don't
know
> > how to handle this, since the INVITE is where the SIP endpoints are
> > supposed to negotiate codec.
> >
> > Jamey
> >
>
> --
>
> ISC Network Engineering
> The University of Pennsylvania
> 3401 Walnut Street, Suite 221A
> Philadelphia, PA 19104
>
>
> voice: 215-573-8396
>
>        215-746-7903
>
> fax: 215-898-9348
>
> sip:
>