Skip to Content.
Sympa Menu

sip.edu - Re: [sip.edu] Experiences with Cisco Unified Communications Call Manager 6 or above.

Subject: SIP in higher education

List archive

Re: [sip.edu] Experiences with Cisco Unified Communications Call Manager 6 or above.


Chronological Thread 
  • From: Chris Kauffman <>
  • To:
  • Subject: Re: [sip.edu] Experiences with Cisco Unified Communications Call Manager 6 or above.
  • Date: Mon, 10 Nov 2008 08:42:45 -0500
  • Organization: Penn State

Oscar,

UCM 6.1(2) does support SIP trunking. There will be some tuning required between CallManager and OpenSER/Kaimilio/OpenSIPS. We have enabled SIP trunking on CallManager 4.1(3) for receipt of SIP calls only. The version of CallManager that we use does not understand SIP URIs in it dial plan.

We are working on an upgrade to 6.1(2) that will take place within the next 90 days, and there has been some talk of looking at outbound SIP routing after the database migration issues are settled. We could talk off-list further if you like.

Thanks very much,

Chris



***********************************
Chris Kauffman
Systems Engineer, TNS
119 University Support Building 2
University Park, PA 16802
Office: 814-867-1327
sip:
Skype: cxk287
http://twitter.com/zorp75ck
http://www.personal.psu.edu/cxk287/
***********************************


Steven C. Blair wrote:
If you wish to add a SIP proxy either OpenSER/OpenSIPs or SER will work fine. I'm not
sure what you mean when you say "... supports Directory to query." Both proxy
servers will maintain a database of contacts based on register messages and a database
of subscribers provided you compile in MySQL support.

Does Call manager 6 speak SIP to gateways or does it still only speak MGCP?

What about support for alphabetic userid in the R-URI and DNS SRV support? If
CCM supports these then you may be able to interoperate with SIP.edu without
adding the proxy.

-----Original Message-----
From: Joao Pereira
[mailto:]
Sent: Monday, November 10, 2008 5:46 AM
To:

Subject: Re: [sip.edu] Experiences with Cisco Unified Communications
Call Manager 6 or above.

Hello
You need to install OpenSER and create a trunk form the UCCM to
OpenSER.
Regards
Joao Pereira



wrote:
Hello Everybody:


We are from the Autonomous Barcelona University(UAB) and recently we
installed a new VoIP PBX UCCM 6.1(2)from cisco over sip protocol. We
are thinking to integrate SIP.EDU in our university but we don't have
any experience of people doing that with our configuration.
Watching the SIP.EDU cookbook and comparing, Our Cisco VoIP PBX
haves a coupple of MGCP gateways and SIP support and we think that is
possible to integrate with a SIP PROXY that supports Directory to query
(like SER), doing that the CCM's works as a sip gateway against the
SIP PROXY.
Has anyone any experience with this kind of configuration?


Thanks in advance to everybody!


Óscar







Archive powered by MHonArc 2.6.16.

Top of Page