Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] problem with perfSONAR install

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] problem with perfSONAR install


Chronological Thread 
  • From: Warren Matthews <>
  • To: Sowmya Balasubramanian <>
  • Cc:
  • Subject: Re: [perfsonar-user] problem with perfSONAR install
  • Date: Thu, 7 Feb 2013 21:28:02 -0500

Yes, fantastic. Thanks for your help.

On Feb 7, 2013, at 9:08 PM, Sowmya Balasubramanian wrote:

> Hi Warren,
>
> There isn't anything wrong with the config/setup. The owp files store
> results of tests that other hosts run to your host and not the other way
> around.
>
> I have added a test from one of our test hosts(ps-bw.es.net). You should be
> able to see owp files generated for the test.
>
> Thanks,
> Sowmya
>
> On 2/1/13 3:05 PM, Warren Matthews wrote:
>> Yes, there was a /var/lib/owamp immediately after the fresh installs, and
>> a /var/lib/owamp/catalog but it was empty. There was no
>> /var/lib/owamp/hierarchy
>>
>> I scheduled some tests, I thought perhaps it would create the directory
>> and write the owp files, but it didn't. However, data is being taken. See
>> http://gammon.atkinson.k12.ga.us/serviceTest/index.cgi?eventType=owamp
>>
>>
>>
>> On Feb 1, 2013, at 5:22 PM, Sowmya Balasubramanian wrote:
>>
>>
>>> Hey Warren,
>>>
>>> After the fresh netinstall did you have the /var/lib/owamp directory?
>>>
>>> Sowmya
>>>
>>> On 2/1/13 7:50 AM, Warren Matthews wrote:
>>>
>>>> Hi All
>>>>
>>>> I have 12 perfSONAR hosts, all running Net Install 3.2.2, in a community
>>>> called GAMMON. Earlier this week I installed the 13th system (at a
>>>> location that is a 4 hour drive from my office!), also with Net Install
>>>> 3.2.2 and it is not doing something that I think it is supposed to.
>>>>
>>>> On this occasion, there is no /var/lib/owamp/hierarchy/root/regular/
>>>>
>>>> I think this is bad because I thought this was where owamp stores the
>>>> raw data. But the service graphs show data. It is also the directory
>>>> where we pull the data for our own analysis.
>>>>
>>>> I can't figure out what I might have done differently. Just to be sure I
>>>> downloaded the ISO again from http://www.perfsonar.net/download.html but
>>>> the reinstall results in the same missing directory.
>>>>
>>>> Any suggestions?
>>>>
>>>
>>
>




Archive powered by MHonArc 2.6.16.

Top of Page