ndt-users list created

["Murphy, William " <>]

Your suggestion works.  At the very first prompt in expert mode it lists
a bunch of device drivers and it says you can just hit enter to probe.
I just hit enter and it came up with no problems.  Let me know if I can
send you any screen output that would be useful...  Thank you very much
for your help with this...

-----Original Message-----
From: Richard Carlson 
[mailto:]
 
Sent: Friday, October 03, 2008 2:30 PM
To: Peter Van Epp
Cc: Richard Carlson; 

Subject: Re: NDT Running on AMD Athlon 64?

Hi Peter;

Thanks for the feedback.  I've been looking at this for most of the  
day and other than the amd64-apg module being missing I think  
everything else is on the disk.  Would you, or William please do the  
following.

Insert the NDT disk into the tray and power on
At the splash screen boot prompt type the word "expert" and press  
"enter"

This will cause the boot process to stop at various points to prompt  
you for a response.  I'm interested in knowing what the last message  
is on the screen.  Is it really stopping when it tries to switch in  
the frame buffer?  or is t stopping some place else?

Also, have you tried the V1.10 version now on the web site?  I think I  
corrected a bug in the kernel processing of frame buffers (but I can't  
say for sure).  In any case, let me know the results and I'll work on  
a fix next week.

Thanks;
Rich

On Oct 2, 2008, at 7:03 PM, Peter Van Epp wrote:

> On Thu, Oct 02, 2008 at 12:58:29PM -0500, Richard Carlson wrote:
>> Peter/Bill;
>>
>> The most likely problem is I failed to build the disk driver module
>> for when I rebuilt the kernel with the web100 patch.  If you tell me
>> what module is missing, I can update the ISO image.
>>
>> The best thing would be to boot a stock Knoppix disk and then run the
>> lsmod command to see what modules are being used.  Send me that list
>> and I can compare that to what I have built and get the missing  
>> module
>> installed.
>>
>> RIch
>>
>
>       Good news, it breaks for me the same way but indeed Knoppix 5.1
> boots fine on the machine. An lsmod and dmesg (since I think from  
> the no
> microcode error message this may be a kernel issue, then again  
> amd64_agp
> as module 5 although agp suggests video to me ...) from the 5.1 boot:
>
> lsmod:
>
> Module                  Size  Used by
> ipv6                  279616  12
> sworks_agp             13472  0
> nvidia_agp             12316  0
> efficeon_agp           12192  0
> amd64_agp              16772  0
> ali_agp                11136  0
> dm_mod                 60440  0
> agpgart                36044  5  
> sworks_agp,nvidia_agp,efficeon_agp,amd64_agp,ali_agp
> af_packet              29960  0
> snd_hda_intel          23960  1
> snd_hda_codec         161152  1 snd_hda_intel
> snd_pcm_oss            45728  0
> snd_mixer_oss          20224  1 snd_pcm_oss
> k8temp                  9728  0
> hwmon                   7556  1 k8temp
> snd_pcm                80004  3  
> snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_timer              26500  1 snd_pcm
> snd                    55396  8  
> snd_hda_intel 
> ,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> via_rhine              29320  0
> mii                     9728  1 via_rhine
> soundcore              12512  1 snd
> snd_page_alloc         13960  2 snd_hda_intel,snd_pcm
> forcedeth              45188  0
> tsdev                  11840  0
> sg                     34716  0
> eth1394                23556  0
> evdev                  14208  1
> pcmcia                 41132  0
> firmware_class         14208  1 pcmcia
> yenta_socket           30220  0
> rsrc_nonstatic         17408  1 yenta_socket
> pcmcia_core            43800  3 pcmcia,yenta_socket,rsrc_nonstatic
> cpufreq_ondemand       12300  1
> powernow_k8            18848  1
> speedstep_lib           8836  0
> freq_table              9088  2 cpufreq_ondemand,powernow_k8
> video                  19460  0
> thermal                17928  0
> sbs                    18856  0
> processor              36200  2 powernow_k8,thermal
> i2c_ec                  9216  1 sbs
> i2c_core               25984  1 i2c_ec
> fan                     8836  0
> container               8576  0
> button                 10768  0
> battery                14084  0
> ac                      9348  0
> aufs                   88244  1
> cloop                  18208  1
> sbp2                   28292  0
> ohci1394               38960  0
> ieee1394              300760  3 eth1394,sbp2,ohci1394
> usb_storage            73408  0
> usbhid                 56928  0
> ff_memless              9992  1 usbhid
> libusual               20624  1 usb_storage
> ohci_hcd               24580  0
> uhci_hcd               27788  0
> ehci_hcd               35848  0
> usbcore               135812  7  
> usb_storage,usbhid,libusual,ohci_hcd,uhci_hcd,ehci_hcd
>
> dmesg:
>
> Linux version 2.6.19 
> (root@Knoppix)
>  (gcc version 4.1.2 20061028  
> (prerelease) (Debian 4.1.1-19)) #7 SMP PREEMPT Sun Dec 17 22:01:07  
> CET 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000d7ef0000 (usable)
> BIOS-e820: 00000000d7ef0000 - 00000000d7ef3000 (ACPI NVS)
> BIOS-e820: 00000000d7ef3000 - 00000000d7f00000 (ACPI data)
> BIOS-e820: 00000000d8000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> Warning only 4GB will be used.
> Use a PAE enabled kernel.
> 3200MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at 000f5370
> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
> early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
> On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
> DMI present.
> ACPI: RSDP (v002 HPQOEM                                ) @ 0x000f74a0
> ACPI: XSDT (v001 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000000) @  
> 0xd7ef3100
> ACPI: FADT (v003 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000000) @  
> 0xd7ef9600
> ACPI: SLIC (v001 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000000) @  
> 0xd7ef9800
> ACPI: SSDT (v001 HPQOEM SLIC-CPC 0x00000001  LTP 0x00000001) @  
> 0xd7ef99c0
> ACPI: HPET (v001 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000098) @  
> 0xd7ef9cc0
> ACPI: MCFG (v001 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000000) @  
> 0xd7ef9d40
> ACPI: MADT (v001 HPQOEM SLIC-CPC 0x42302e31 AWRD 0x00000000) @  
> 0xd7ef9740
> ACPI: DSDT (v001 HPQOEM SLIC-CPC 0x00001000 MSFT 0x03000000) @  
> 0x00000000
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:11 APIC version 16
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1 15:11 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> ACPI: IRQ14 used by override.
> ACPI: IRQ15 used by override.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> ACPI: HPET id: 0x10de8201 base: 0xfefff000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
> Detected 2600.006 MHz processor.
> Built 1 zonelists.  Total pages: 1040384
> Kernel command line: ramdisk_size=100000 init=/etc/init lang=us  
> apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 quiet  
> BOOT_IMAGE=knoppix BOOT_IMAGE=linux
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> spurious 8259A interrupt: IRQ7.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3497296k/4194304k available (2747k kernel code, 39284k  
> reserved, 958k data, 336k init, 2620352k highmem)
> virtual kernel memory layout:
>    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc04a6000 - 0xc04fa000   ( 336 kB)
>      .data : 0xc03aef9c - 0xc049e7b4   ( 958 kB)
>      .text : 0xc0100000 - 0xc03aef9c   (2747 kB)
> Checking if this processor honours the WP bit even in supervisor  
> mode... Ok.
> Using HPET for base-timer
> Calibrating delay using timer specific routine.. 5204.97 BogoMIPS  
> (lpj=10409941)
> Security Framework v1.0.0 initialized
> SELinux:  Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000  
> 00000000 00002001 00000000 0000011f
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0(2) -> Core 0
> CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410  
> 00002001 00000000 0000011f
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
> SMP alternatives: switching to UP code
> ACPI: Core revision 20060707
> CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
> SMP alternatives: switching to SMP code
> Booting processor 1/1 eip 3000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5200.04 BogoMIPS  
> (lpj=10400086)
> CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000  
> 00000000 00002001 00000000 0000011f
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1(2) -> Core 1
> CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410  
> 00002001 00000000 0000011f
> CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
> Total of 2 processors activated (10405.01 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization across 2 CPUs:
> CPU#0 had -9 usecs TSC skew, fixed it up.
> CPU#1 had 9 usecs TSC skew, fixed it up.
> Brought up 2 CPUs
> migration_cost=152
> checking if image is initramfs...it isn't (no cpio magic); looks  
> like an initrd
> Freeing initrd memory: 1188k freed
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: Using MMCONFIG
> PCI: No mmconfig possible on 0:18
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:00:0d.0
> PCI: Transparent bridge - 0000:00:04.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
> ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
> ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
> ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
> ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
> ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
> ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
> ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
> ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
> ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
> ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
> ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
> ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
> ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0, disabled.
> ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> PnPBIOS: Disabled by ACPI PNP
> SCSI subsystem initialized
> libata version 2.00 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps,  
> post a report
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
> pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
> pnp: 00:01: ioport range 0x1400-0x147f has been reserved
> pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
> pnp: 00:01: ioport range 0x1800-0x187f has been reserved
> pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
> PCI: Bridge: 0000:00:04.0
>  IO window: c000-cfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdb00000-fdbfffff
> PCI: Bridge: 0000:00:09.0
>  IO window: b000-bfff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
> TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1222965581.656:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> fuse init (API version 7.8)
> fuse distribution version: 2.6.1
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered (default)
> io scheduler cfq registered
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> pcie_portdrv_probe->Dev[03e8:10de] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:09.0:pcie00]
> Allocate Port Service[0000:00:09.0:pcie03]
> vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using  
> 3072k, total 131072k
> vesafb: mode is 1024x768x16, linelength=2048, pages=1
> vesafb: protected mode interface info at c000:d560
> vesafb: pmi: set display start = c00cd596, set palette = c00cd600
> vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703  
> c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type  
> 15 (usb?)
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 100000K size 1024  
> blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with  
> idebus=xx
> NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
> NFORCE-MCP61: chipset revision 162
> NFORCE-MCP61: not 100% native mode: will probe irqs later
> NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
> Probing IDE interface ide0...
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> Loading iSCSI transport class v2.0-724.<7>sata_nv 0000:00:08.0:  
> version 2.0
> ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level,  
> low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:08.0 to 64
> ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 16
> ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 16
> scsi0 : sata_nv
> ata1: SATA link down (SStatus 0 SControl 300)
> ATA: abnormal status 0x7F on port 0x9F7
> scsi1 : sata_nv
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI, max UDMA/33
> ata2.00: configured for UDMA/33
> scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  0208 PQ: 0  
> ANSI: 5
> sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> EISA: Probing bus 0 at eisa.0
> Cannot allocate resource for EISA slot 1
> EISA: Detected 0 cards.
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 15
> Using IPI No-Shortcut mode
> ACPI: (supports S0 S1 S3 S4 S5)
> Time: hpet clocksource has been installed.
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> RAMDISK: Compressed image found at block 0
> EXT2-fs warning: checktime reached, running e2fsck is recommended
> VFS: Mounted root (ext2 filesystem).
> Failed initialization of WD-7000 SCSI card!
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level,  
> low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:02.1 to 64
> ehci_hcd 0000:00:02.1: EHCI Host Controller
> ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:02.1: debug port 1
> PCI: cache line size of 64 is not supported by device 0000:00:02.1
> ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 10 ports detected
> USB Universal Host Controller Interface driver v3.0
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)  
> Driver (PCI)
> ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level,  
> low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 10 ports detected
> usb 1-9: new high speed USB device using ehci_hcd and address 2
> usb 1-9: configuration #1 chosen from 1 choice
> usb 1-10: new high speed USB device using ehci_hcd and address 3
> usb 1-10: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver libusual
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> Initializing USB Mass Storage driver...
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> ieee1394: Initialized config rom entry `ip1394'
> ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
> ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC4] -> GSI 19 (level,  
> low) -> IRQ 19
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fdeff000- 
> fdeff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
> ieee1394: sbp2: Try serialize_io=0 for better performance
> ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0000105c89]
> scsi 2:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0  
> ANSI: 0 CCS
> sd 2:0:0:0: Attached scsi removable disk sda
> usb-storage: device scan complete
> ISO 9660 Extensions: Microsoft Joliet Level 3
> ISO 9660 Extensions: RRIP_1991A
> cloop: Initializing cloop v2.05
> cloop: loaded (max 8 devices)
> cloop: /cdrom/KNOPPIX/KNOPPIX: 15609 blocks, 131072 bytes/block,  
> largest block is 131098 bytes.
> cloop: loaded 256 blocks into cache.
> ISO 9660 Extensions: RRIP_1991A
> aufs 2.6.19-20061211
> Freeing unused kernel memory: 336k freed
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Fan [FAN] (on)
> Using specific hotkey driver
> ACPI: Thermal Zone [THRM] (40 C)
> cpufreq: No nForce2 chipset.
> powernow: This module only works with AMD K7 CPUs
> powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+  
> processors (version 2.00.00)
> powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0x8
> powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xa
> powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xc
> powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xe
> powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
> powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
> eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
> sr 1:0:0:0: Attached scsi generic sg0 type 5
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
> ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level,  
> low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> forcedeth: using HIGHDMA
> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> eth1: forcedeth.c: subsystem: 0103c:2a66 bound to 0000:00:07.0
> ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
> ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level,  
> low) -> IRQ 20
> eth2: VIA Rhine III at 0xfdefe000, 00:1e:58:46:43:8e, IRQ 20.
> eth2: MII PHY found at address 1, status 0x7849 advertising 05e1  
> Link 0000.
> eth1: no link during initialization.
> ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level,  
> low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> NET: Registered protocol family 17
> Linux agpgart interface v0.101 (c) Dave Jones
> device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised:

> eth2: link down
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> ADDRCONF(NETDEV_UP): eth2: link is not ready
> Mobile IPv6
> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
> ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
> eth2: no IPv6 routers present
> eth1: no link during initialization.
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
> eth2: no IPv6 routers present
> usb 1-5: new high speed USB device using ehci_hcd and address 4
> usb 1-5: configuration #1 chosen from 1 choice
> scsi3 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 4
> usb-storage: waiting for device to settle before scanning
> usb 1-5: USB disconnect, address 4
> usb 1-5: new high speed USB device using ehci_hcd and address 5
> hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
> usb 1-5: new high speed USB device using ehci_hcd and address 6
> usb 1-5: configuration #1 chosen from 1 choice
> scsi4 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 6
> usb-storage: waiting for device to settle before scanning
> scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0  
> ANSI: 2
> SCSI device sdb: 7856128 512-byte hdwr sectors (4022 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 23 00 00 00
> sdb: assuming drive cache: write through
> SCSI device sdb: 7856128 512-byte hdwr sectors (4022 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 23 00 00 00
> sdb: assuming drive cache: write through
> sdb: sdb1
> sd 4:0:0:0: Attached scsi removable disk sdb
> sd 4:0:0:0: Attached scsi generic sg2 type 0
> usb-storage: device scan complete
>
> Peter Van Epp / Operations and Technical Support
> Simon Fraser University, Burnaby, B.C. Canada

Richard Carlson

1000 Oakbrook Dr
Ann Arbor, MI  48194

P: 734-352-7043
C: 630-251-4572