ndt-users list created

[Peter Van Epp <>]

        I'll try it at home tonite (and make sure I did boot Knopix in one of
the HPs, I'm pretty sure I did) and do a lsmod.

Peter Van Epp / Operations and Technical Support 
Simon Fraser University, Burnaby, B.C. Canada

On Thu, Oct 02, 2008 at 12:58:29PM -0500, Richard Carlson wrote:
> Peter/Bill;
> 
> The most likely problem is I failed to build the disk driver module  
> for when I rebuilt the kernel with the web100 patch.  If you tell me  
> what module is missing, I can update the ISO image.
> 
> The best thing would be to boot a stock Knoppix disk and then run the  
> lsmod command to see what modules are being used.  Send me that list  
> and I can compare that to what I have built and get the missing module  
> installed.
> 
> RIch
> 
> On Oct 2, 2008, at 11:49 AM, Peter Van Epp wrote:
> 
> >     Come to think of it, there is a good chance this isn't going to work.
> >I just cut a 1.9 ISO and may try it on my IBM (until I realized that  
> >expecting,
> >Intel, it isn't going to run on my PPC machine :-)), I will try it  
> >on one of
> >my HPs tonite. There are likely 32/64 bit library issues (we have  
> >been bit by
> >that when hand building) unless either Rich or Knoppix has taken  
> >that in to
> >account.
> >
> >Peter Van Epp / Operations and Technical Support
> >Simon Fraser University, Burnaby, B.C. Canada
> >
> >On Thu, Oct 02, 2008 at 10:31:34AM -0500, Murphy, William  wrote:
> >>I am trying to boot the NPT v1.9 CD on an AMD Athlon 64 HP Desktop  
> >>and I
> >>am getting errors like "microcode unsupported CPU 0" and it finally  
> >>dies
> >>by dropping to a "very" limited shell because it can't find the  
> >>Knoppix
> >>filesystem...  I have tried a variety of cheatcodes and I have  
> >>tested by
> >>CD in a genuine Intel laptop and it boots just fine.  Does anyone  
> >>have
> >>any suggestions or can someone confirm that NPT works/does not work  
> >>on
> >>Athlon?  Thanks...
> >>
> >>
> >>
> >>Bill Murphy
> >>
> >>Senior Network Analyst
> >>
> >>University of Texas Health Science Center at Houston
> >>
> >>6901 Bertner, Suite 432
> >>
> >>Houston, TX  77030
> >>
> >>
> >>
> >>(713) 500-9947, Office
> >>
> >>(832) 594-0136, Cell
> >>
> >>
> >>
> 
> Richard Carlson
> 
> 1000 Oakbrook Dr
> Ann Arbor, MI  48194
> 
> P: 734-352-7043
> C: 630-251-4572