Skip to Content.
Sympa Menu

ndt-users - Re: My NDT just did not work

Subject: ndt-users list created

List archive

Re: My NDT just did not work


Chronological Thread 
  • From: "Ken Bellars" <>
  • To: "Richard Carlson" <>,
  • Subject: Re: My NDT just did not work
  • Date: Tue, 10 Oct 2006 08:22:37 +0100

Richard,

I appreciate your reply.

I have upgraded the the kenel to 2.6.18 and now my NDT is working. Am gonno start doing some tweaking to customise the app to suit what I need.

Thanks for being there.

-------------------
Regards
Ken_bellars



On 10/5/06, Richard Carlson <> wrote:
Hi Ken;

OK, lets make sure I understand thing properly.  You have a Debian based
system and you downloaded, built, and installed the NDT-3.3.13
package.  Now when you try and run a test you get this error message.

Based on the messages below I suspect that the kernel has not been
upgraded.  To check this look for a "/proc/web100" directory.  If this
directory exists, then use the "readall" command (/usr/local/bin/readall by
default) to verify that the kernel and user_land library are properly
installed.

Please confirm that the patched kernel is build and running.

Briefly the NDT system requires a web100 enhanced kernel, meaning that you
need to build a new kernel before the NDT tool will operate.  This is
spelled out in the original INSTALL file.  However, I just looked and found
that the wrong INSTALL file is shipped in the package.  The next release
will have the proper version.

Regards;
Rich

At 12:08 PM 10/5/2006, Ken Bellars wrote:
>Hello ,
>
>I really need your help. My NDT just did not work. My report is as below.
>
>===================
>TCP/Web100 Network Diagnostic Tool v5.4.8
>click START to begin
>Server busy: Please wait 30 seconds for previous test to finish
>
>click START to re-test
>Another client is currently being served, your test will begin within 45
>seconds
>Server busy: Please wait 30 seconds for previous test to finish
>
>click START to re-test
>Server busy: Please wait 30 seconds for previous test to finish
>
>click START to re-test
>Another client is currently being served, your test will begin within 45
>seconds
>Server busy: Please wait 30 seconds for previous test to finish
>
>click START to re-test
>===================
>
>The above keep going on and on for internity.
>
>My system is Debia ( 2.6.8-3-686 i686 GNU/Linux)
>
>Thanks for your immediate reply
>

------------------------------------



Richard A. Carlson                              e-mail:
Network Engineer                                phone:  (734) 352-7043
Internet2                                       fax:    (734) 913-4255
1000 Oakbrook Dr; Suite 300
Ann Arbor,  MI  48104





Archive powered by MHonArc 2.6.16.

Top of Page