Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] elasticsearch.exceptions.AuthenticationException since PS-5.0 Update

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] elasticsearch.exceptions.AuthenticationException since PS-5.0 Update


Chronological Thread 
  • From: Andrew Lake <>
  • To: , Andreas Haupt <>
  • Subject: Re: [perfsonar-user] elasticsearch.exceptions.AuthenticationException since PS-5.0 Update
  • Date: Tue, 6 Jun 2023 05:33:46 -0700

Hi,

Would it be possible to try a clean install on the SL box? I suspect there is a partial setup which is not triggering the desired scripts. You could also just do a “yum remove perfsonar-toolkit perfsonar-archive perfsonar-logstash perfsonar-logstash-output-plugin opensearch” followed by a “yum install perfsonar-toolkit”.

Thanks,
Andy


On June 6, 2023 at 3:24:45 AM, Andreas Haupt () wrote:

Me again,

update to 5.0.2 went through last night, but the problem persists:

http://perfson1.zeuthen.desy.de/esmond/perfsonar/archive/

Any idea where to look for the source of the problem?

Thanks,
Andreas

On Fri, 2023-06-02 at 09:33 +0200, Andreas Haupt wrote:
> Hi Andrew,
>
> thanks a lot! Will wait for the 5.0.2 release :-) It's not urgent. Just
> wondered what my problem is, as most of the other installations I know of
> "just work" ;-)
>
> Thanks,
> Andreas
>
> On Thu, 2023-06-01 at 07:33 -0700, Andrew Lake wrote:
> > Hi Andreas, 
> >
> > Actually just responded to a similar email off-list about an RHEL7 box,
> > and I think I know the cause. A couple of our setup scripts that setup
> > auth need to distinguish between Debian variants and EL variants but do
> > so in such away that assume CentOS. Likely somewhere buried in the yum
> > install output is a couple messages like "[ERROR]: Unknown operating
> > system” from these scripts. 
> >
> > The good news is we actually had already started fixing these since it
> > breaks things once you start using Alma and Rocky. These issues should
> > be corrected in 5.0.2 (I suspect around Monday we should have that
> > released). If you can wait until then I think your box will get fixed.
> > If you need anything sooner let me know and I can give some nightly RPM
> > builds to try.
> >
> > Thanks,
> > Andy
> >  
> >  
> > On June 1, 2023 at 7:12:08 AM, Andrew Lake () wrote:
> >  
> > > Hi Andreas, 
> > >
> > > I am guessing its something particular to SL7. Seems like something
> > > went
> > > wrong with the opensearch auth setup.  Any error messages during the
> > > RPM
> > > install?
> > >
> > > Under /etc/perfsonar/opensearch do you see any files
> > > like opensearch_login and logstash_login? You don’t need to send
> > > contents, just want to make sure they exist. 
> > >
> > > In the file /etc/opensearch/opensearch-security/internal_users.yml, if
> > > you do a text search do you see a “pscheduler_reader” user? Again,
> > > don’t
> > > need to send file. 
> > >
> > > Thanks,
> > > Andy
> > >
> > >
> > >  
> > > On May 30, 2023 at 7:58:04 AM, Andreas Haupt ()
> > > wrote:
> > >  
> > > > Hi Szymon,
> > > >
> > > > On Tue, 2023-05-30 at 16:36 +0200, Szymon Trocha wrote:
> > > > > Hi Andreas,
> > > > > Was it a toolkit update from 4.4.6? Which OS is used?
> > > >
> > > > Yes, this particular system was updated from 4.4.6. It's running
> > > > SL7.
> > > >
> > > > But, as mentioned, I also have a test system (running SL7 as well)
> > > > which
> > > > was reinstalled from scratch and ended up with the same issue.
> > > >
> > > > Thanks,
> > > > Andreas
>

--
| Andreas Haupt            | E-Mail:
|  DESY Zeuthen            | WWW:    http://www.zeuthen.desy.de/~ahaupt
|  Platanenallee 6         | Phone:  +49/33762/7-7359
|  D-15738 Zeuthen         | Fax:    +49/33762/7-7216





Archive powered by MHonArc 2.6.24.

Top of Page