perfSONAR User Q&A and Other Discussion

[<>]

Hi All, We just set up a new system with the toolkit ISO.  The 10G interface
doesn't show up in the toolkit, only in the OS.  

System details:

i7, 4GB RAM, intel x520DA2 card with 10Gb Cisco SR transceivers.  p1p2 is
connected to our router.

Only em1 and LO show up in the toolkit for interfaces.

ifconfig shows - I replaced the actual IPs with xx:

em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 128.198.xx.xx  netmask 255.255.252.0  broadcast 128.198.xx.255
        inet6 fe80::5ef9:ddff:fe78:270a  prefixlen 64  scopeid 0x20<link>
        ether 5c:f9:dd:78:27:0a  txqueuelen 10000  (Ethernet)
        RX packets 526962  bytes 39667668 (37.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13203  bytes 4572503 (4.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xe1a00000-e1a20000

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 70932  bytes 34610796 (33.0 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 70932  bytes 34610796 (33.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

p1p2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 128.198.xx.xx  netmask 255.255.255.240  broadcast 128.198.xx.xx
        inet6 fe80::14cf:4f58:577f:bf90  prefixlen 64  scopeid 0x20<link>
        ether 00:1b:21:55:1e:c5  txqueuelen 10000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:70:85:34  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Any help appreciated.  I'm sure I'm missing something simple.