perfSONAR User Q&A and Other Discussion

["Bruce A. Mah" <>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

ESnet (Energy Sciences Network) is proud to announce iperf 3.2.  This
comes one year and eight months after iperf 3.1 (during the
intervening time there were seven bugfix 3.1.x releases).

iperf 3.2 adds a number of new features, including an optional
authentication system and a new --dscp option for setting the DSCP
value in test packets.  This version also brings in a number of fixes
and improvements in various areas, particularly computing and printing
statistics at the end of a test.  Sending of UDP test data is now
smoother and can be tuned.  The RELEASE_NOTES file in the source
distribution contains a more comprehensive list of the various
changes.  Note that iperf-3.2 includes all of the bugfixes and
improvements contained in 3.1.x series of releases.

iperf 3.2 should be fully backward-compatible with iperf 3.1 and iperf
3.0, that is, iperf 3.2 clients and servers should interoperate
correctly with all 3.1 and 3.0 clients and servers.  Note however that
users running iperf 3.2 with the bwctl utility (perhaps as a part of a
perfSONAR 3.x installation) need to ensure they are using bwctl
version 1.6.3 or newer.

iperf3 is a tool for measuring the maximum TCP, UDP, and SCTP throughput
along a path, allowing for the tuning of various parameters and
reporting measurements such as throughput, jitter, and datagram packet
loss.  It is fully supported on Linux, FreeBSD, and macOS.  It may
run on other platforms as well, although it has not received the same
attention and testing.  Note that iperf3 is not compatible with, and
will not interoperate with, version 2 or earlier of iperf.

The source code for iperf 3.2 is available at:

http://downloads.es.net/pub/iperf/iperf-3.2.tar.gz

SHA256 hash:

f207b36f861485845dbdf09f909c62f3d2222a3cf3d2682095aede8213cd9c1d  
iperf-3.2.tar.gz

iperf3 is freely-redistributable under a 3-clause BSD license.  More
information can be found in the LICENSE file inside the source
distribution.

Additional documentation for iperf3 can be found at:

http://software.es.net/iperf

More information about iperf3 (including the issue tracker, source
code repository access, and mailing list) can be found on the iperf3
page on GitHub at:

https://github.com/esnet/iperf

User questions can go to the iperf users list (which is more-or-less
shared between iperf2 and iperf3):



Mailing list information and archives can be found at:

https://lists.sourceforge.net/lists/listinfo/iperf-users

The mailing list for iperf3 development is:



To see the list archives or join the mailing list, visit:

http://groups.google.com/group/iperf-dev

-----BEGIN PGP SIGNATURE-----

iQEzBAEBCgAdFiEE+Fo4IENp9xo01E6DSYSRCoyq7ooFAllRc9wACgkQSYSRCoyq
7oo7uwf/SUeTU6OpawbrPRno4+yNq6kN/nQ1rksbSpkoI/p9iLwP2wfZz6doYzB8
FOzhggglIMDyag6mYybRB23cKJHhYMaRlsjNKBE2uveqq0Z8ge4Yded8bU8mUrWI
cDR619fEjAzLAZmz67cDBmMluA+70RNky1Maid9+Qwj6poHV3OYHsIk2J1lY96vm
cYTsgtEZu/BnYGolV4QVb8QqfabOuzrRr12x/cZV6YdsBFqKrbThubDk92zX+hpn
MBhtotZu9/8L80A30feqM651kxTkU3MeOaOzqlbF5H1pUtXolwCTQcreCiuhNaQq
jPZ5sJtGVsviPq/Eb4n2o5SlxH5Mrw==
=rxlK
-----END PGP SIGNATURE——