perfSONAR User Q&A and Other Discussion

[Loren Jan Wilson <>]

I've been trying to get pS performance toolkit 3.1.2 running from the
cd. (I have never run perfsonar on this machine before.)

I go through the console config script and save the changes to
/dev/sdb7, and the config definitely gets saved to the partition, but
the live cd doesn't load the configuration when I reboot.

I've noticed that it doesn't automount any of the partitions at boot
time; the ext3 partitions on /dev/sda can't mount at all (unsupported
optional features error) and for the /dev/sdb partitions there's an
error in dmesg that says "VFS: Can't find ext3 filesystem on dev sdb7"
for each partition on /dev/sdb.

Typing "mount /dev/sdb7" mounts the partition just fine, which is how
it's able to save the config to the partition. But it doesn't load the
saved config at boot. I've been looking around a bit, but I haven't
found the place in the boot sequence where it tries to load its config
files...

I've attached a copy of the dmesg file after a config save to
/dev/sdb7 in case this helps.

-- 
Loren Jan Wilson, Network Administrator, Leadership Computing Facility
Argonne National Laboratory, Bldg. 240 Room 2121 / +1-630-252-4251 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27.37-web100 
()
 (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #4 SMP Mon Oct 19 10:15:33 
EDT 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dffcb040 (usable)
[    0.000000]  BIOS-e820: 00000000dffcb040 - 00000000dffceec0 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dffceec0 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0xdffcb max_arch_pfn = 0x100000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 
0x7010600070106
[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[    0.000000] RAMDISK: 7fe97000 - 7ffff805
[    0.000000] Allocated new RAMDISK: 00774000 - 008dc805
[    0.000000] Move RAMDISK from 000000007fe97000 - 000000007ffff804 to 
00774000 - 008dc804
[    0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM   )
[    0.000000] ACPI: XSDT DFFCEDC0, 0044 (r1 IBM    SERMAGEL     1001 IBM  
45444F43)
[    0.000000] ACPI: FACP DFFCED00, 0084 (r2 IBM    SERMAGEL     1001 IBM  
45444F43)
[    0.000000] ACPI: DSDT DFFCCC40, 1EBB (r2 IBM    SERMAGEL     1000 INTL 
20060912)
[    0.000000] ACPI: FACS DFFCEB00, 0040
[    0.000000] ACPI: APIC DFFCEC80, 0074 (r1 IBM    SERMAGEL     1001 IBM  
45444F43)
[    0.000000] ACPI: SRAT DFFCEB80, 00E8 (r1 IBM    SERMAGEL     1001 IBM  
45444F43)
[    0.000000] ACPI: MCFG DFFCEB40, 003C (r1 IBM    SERMAGEL     1001 IBM  
45444F43)
[    0.000000] 2687MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00008000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> 
[0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> 
[0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> 
[0000006000 - 0000007000]
[    0.000000]   #3 [0000200000 - 0000770404]    TEXT DATA BSS ==> 
[0000200000 - 0000770404]
[    0.000000]   #4 [0000771000 - 0000774000]    INIT_PG_TABLE ==> 
[0000771000 - 0000774000]
[    0.000000]   #5 [000009ac00 - 0000100000]    BIOS reserved ==> 
[000009ac00 - 0000100000]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> 
[0000007000 - 0000008000]
[    0.000000]   #7 [0000774000 - 00008dc805]      NEW RAMDISK ==> 
[0000774000 - 00008dc805]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> 
[0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c009ad40] 0009ad40
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x000dffcb
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000dffcb
[    0.000000] On node 0 totalpages: 917349
[    0.000000] free_area_init_node: node 0, pgdat c065e400, node_mem_map 
c1000000
[    0.000000]   DMA zone: 3962 pages, LIFO batch:0
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 682699 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x488
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
[    0.000000] ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
[    0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 
16-31
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] mapped IOAPIC to ffff9000 (fec01000)
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 
000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 
0000000000100000
[    0.000000] Allocating PCI resources starting at e1000000 (gap: 
e0000000:10000000)
[    0.000000] PERCPU: Allocating 39964 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 910181
[    0.000000] Kernel command line: ramdisk_size=100000 init=/etc/init 
lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix 
BOOT_IMAGE=linux 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 2600.069 MHz processor.
[    0.000999] Console: colour dummy device 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] Memory: 3631768k/3669804k available (2964k kernel code, 36744k 
reserved, 1593k data, 432k init, 2752300k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.000999]       .init : 0xc067a000 - 0xc06e6000   ( 432 kB)
[    0.000999]       .data : 0xc04e5367 - 0xc0673a30   (1593 kB)
[    0.000999]       .text : 0xc0200000 - 0xc04e5367   (2964 kB)
[    0.000999] Checking if this processor honours the WP bit even in 
supervisor mode...Ok.
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, 
CPUs=4, Nodes=1
[    0.001008] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 5200.13 BogoMIPS (lpj=2600069)
[    0.001023] Security Framework initialized
[    0.001029] SELinux:  Initializing.
[    0.001040] SELinux:  Starting in permissive mode
[    0.001049] Mount-cache hash table entries: 512
[    0.001212] Initializing cgroup subsys ns
[    0.001215] Initializing cgroup subsys cpuacct
[    0.001230] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.001232] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.001234] CPU 0(2) -> Core 0
[    0.001235] using C1E aware idle routine
[    0.001244] Checking 'hlt' instruction... OK.
[    0.007030] ACPI: Core revision 20080609
[    0.011386] ENABLING IO-APIC IRQs
[    0.011576] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.021754] CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2218 stepping 03
[    0.021996] Booting processor 1/2 ip 6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 5199.27 
BogoMIPS (lpj=2599637)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.000999] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.000999] CPU 1(2) -> Core 0
[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 
0x7010600070106
[    0.092705] CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2218 stepping 03
[    0.092765] Booting processor 2/1 ip 6000
[    0.000999] Initializing CPU#2
[    0.000999] Calibrating delay using timer specific routine.. 5199.27 
BogoMIPS (lpj=2599637)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.000999] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.000999] CPU 2(2) -> Core 1
[    0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 
0x7010600070106
[    0.163493] CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2218 stepping 03
[    0.163555] Booting processor 3/3 ip 6000
[    0.000999] Initializing CPU#3
[    0.000999] Calibrating delay using timer specific routine.. 5199.27 
BogoMIPS (lpj=2599639)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.000999] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.000999] CPU 3(2) -> Core 1
[    0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 
0x7010600070106
[    0.234682] CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2218 stepping 03
[    0.234704] Brought up 4 CPUs
[    0.234706] Total of 4 processors activated (20797.96 BogoMIPS).
[    0.235004] net_namespace: 820 bytes
[    0.235009] Booting paravirtualized kernel on bare hardware
[    0.235142] Time: 23:40:57  Date: 02/23/10
[    0.235171] NET: Registered protocol family 16
[    0.235189] No dock devices found.
[    0.235189] EISA bus registered
[    0.235189] ACPI: bus type pci registered
[    0.235189] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.235189] PCI: MCFG area at f0000000 reserved in E820
[    0.235189] PCI: Using MMCONFIG for extended config space
[    0.235189] PCI: Using configuration type 1 for base access
[    0.238199] ACPI: EC: Look up EC in DSDT
[    0.240199] ACPI: Interpreter enabled
[    0.240201] ACPI: (supports S0 S4 S5)
[    0.240210] ACPI: Using IOAPIC for interrupt routing
[    0.242080] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.242080] PCI: 0000:00:01.0 reg 10 32bit mmio: [e8000000, efffffff]
[    0.242080] PCI: 0000:00:01.0 reg 14 io port: [3000, 30ff]
[    0.242080] PCI: 0000:00:01.0 reg 18 32bit mmio: [e7ff0000, e7ffffff]
[    0.242080] PCI: 0000:00:01.0 reg 30 32bit mmio: [0, 1ffff]
[    0.242080] pci 0000:00:01.0: supports D1
[    0.242080] pci 0000:00:01.0: supports D2
[    0.242081] PCI: 0000:00:04.0 reg 10 32bit mmio: [e7fef000, e7feffff]
[    0.242127] pci 0000:00:04.0: supports D1
[    0.242129] pci 0000:00:04.0: supports D2
[    0.242130] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
[    0.242134] pci 0000:00:04.0: PME# disabled
[    0.242160] PCI: 0000:00:04.1 reg 10 32bit mmio: [e7fee000, e7feefff]
[    0.242206] pci 0000:00:04.1: supports D1
[    0.242207] pci 0000:00:04.1: supports D2
[    0.242209] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
[    0.242212] pci 0000:00:04.1: PME# disabled
[    0.242238] PCI: 0000:00:04.2 reg 10 32bit mmio: [e7fedc00, e7fedcff]
[    0.242283] pci 0000:00:04.2: supports D1
[    0.242285] pci 0000:00:04.2: supports D2
[    0.242286] pci 0000:00:04.2: PME# supported from D0 D1 D2 D3hot
[    0.242290] pci 0000:00:04.2: PME# disabled
[    0.242335] pci 0000:00:07.0: Enabling HT MSI Mapping
[    0.242421] PCI: 0000:00:08.1 reg 10 io port: [1f0, 1f7]
[    0.242427] PCI: 0000:00:08.1 reg 14 io port: [3f4, 3f7]
[    0.242433] PCI: 0000:00:08.1 reg 18 io port: [170, 177]
[    0.242438] PCI: 0000:00:08.1 reg 1c io port: [374, 377]
[    0.242444] PCI: 0000:00:08.1 reg 20 io port: [810, 81f]
[    0.242550] PCI: 0000:00:09.0 reg 10 32bit mmio: [e7fec000, e7fecfff]
[    0.242556] PCI: 0000:00:09.0 reg 14 io port: [3400, 34ff]
[    0.242625] PCI: 0000:00:09.1 reg 10 32bit mmio: [e7feb000, e7febfff]
[    0.242631] PCI: 0000:00:09.1 reg 14 io port: [3800, 38ff]
[    0.242700] PCI: 0000:00:09.2 reg 10 32bit mmio: [e7fea000, e7feafff]
[    0.242707] PCI: 0000:00:09.2 reg 14 io port: [3c00, 3cff]
[    0.242998] pci 0000:00:09.2: supports D1
[    0.243000] pci 0000:00:09.2: supports D2
[    0.243001] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot
[    0.243005] pci 0000:00:09.2: PME# disabled
[    0.243043] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.243045] pci 0000:00:0a.0: PME# disabled
[    0.243073] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[    0.243076] pci 0000:00:0b.0: PME# disabled
[    0.243104] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[    0.243107] pci 0000:00:0c.0: PME# disabled
[    0.243137] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[    0.243139] pci 0000:00:0d.0: PME# disabled
[    0.243167] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    0.243169] pci 0000:00:0e.0: PME# disabled
[    0.243360] PCI: 0000:15:0e.0 reg 10 io port: [6430, 6437]
[    0.243365] PCI: 0000:15:0e.0 reg 14 io port: [6450, 6453]
[    0.243369] PCI: 0000:15:0e.0 reg 18 io port: [6438, 643f]
[    0.243374] PCI: 0000:15:0e.0 reg 1c io port: [6454, 6457]
[    0.243378] PCI: 0000:15:0e.0 reg 20 io port: [6000, 601f]
[    0.243382] PCI: 0000:15:0e.0 reg 24 32bit mmio: [e4000000, e4001fff]
[    0.243387] PCI: 0000:15:0e.0 reg 30 32bit mmio: [0, 1ffff]
[    0.243421] PCI: bridge 0000:00:07.0 io port: [6000, 6fff]
[    0.243424] PCI: bridge 0000:00:07.0 32bit mmio: [e0000000, e40fffff]
[    0.243468] PCI: 0000:16:02.0 reg 10 64bit mmio: [e0000000, e1ffffff]
[    0.243515] pci 0000:16:02.0: PME# supported from D3hot D3cold
[    0.243518] pci 0000:16:02.0: PME# disabled
[    0.243555] PCI: 0000:16:03.0 reg 10 64bit mmio: [e2000000, e3ffffff]
[    0.243601] pci 0000:16:03.0: PME# supported from D3hot D3cold
[    0.243604] pci 0000:16:03.0: PME# disabled
[    0.243635] PCI: bridge 0000:15:0d.0 32bit mmio: [e0000000, e3ffffff]
[    0.243810] PCI: 0000:22:00.0 reg 10 64bit mmio: [e5000000, e5ffffff]
[    0.243835] PCI: 0000:22:00.0 reg 18 64bit mmio: [e7600000, e76fffff]
[    0.243873] PCI: 0000:22:00.0 reg 30 32bit mmio: [0, 7ffff]
[    0.244011] PCI: bridge 0000:00:0a.0 32bit mmio: [e7600000, e77fffff]
[    0.244015] PCI: bridge 0000:00:0a.0 64bit mmio pref: [e5000000, e5ffffff]
[    0.244059] PCI: 0000:05:00.0 reg 10 64bit mmio: [e7800000, e79fffff]
[    0.244068] PCI: 0000:05:00.0 reg 18 64bit mmio: [e7c00000, e7c1ffff]
[    0.244074] PCI: 0000:05:00.0 reg 20 io port: [5000, 50ff]
[    0.244084] PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 7fff]
[    0.244122] PCI: bridge 0000:00:0c.0 io port: [5000, 5fff]
[    0.244124] PCI: bridge 0000:00:0c.0 32bit mmio: [e7800000, e7afffff]
[    0.244128] PCI: bridge 0000:00:0c.0 64bit mmio pref: [e7c00000, e7cfffff]
[    0.244290] PCI: 0000:17:00.0 reg 10 64bit mmio: [e6000000, e6ffffff]
[    0.244315] PCI: 0000:17:00.0 reg 18 64bit mmio: [e7d00000, e7dfffff]
[    0.244352] PCI: 0000:17:00.0 reg 30 32bit mmio: [0, 7ffff]
[    0.244477] PCI: bridge 0000:00:0d.0 32bit mmio: [e7d00000, e7efffff]
[    0.244481] PCI: bridge 0000:00:0d.0 64bit mmio pref: [e6000000, e6ffffff]
[    0.244511] bus 00 -> node 0
[    0.244516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.246242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB0._PRT]
[    0.246330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB0.PPB_._PRT]
[    0.249032] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.249041] pnp: PnP ACPI init
[    0.249041] ACPI: bus type pnp registered
[    0.250030] pnp: PnP ACPI: found 11 devices
[    0.250032] ACPI: ACPI bus type pnp unregistered
[    0.250043] SCSI subsystem initialized
[    0.250043] libata version 3.00 loaded.
[    0.250043] PCI: Using ACPI for IRQ routing
[    0.254967] NetLabel: Initializing
[    0.254969] NetLabel:  domain hash size = 128
[    0.254970] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.254980] NetLabel:  unlabeled traffic allowed by default
[    0.256979] system 00:03: ioport range 0x3f8-0x3ff has been reserved
[    0.256986] system 00:09: ioport range 0x400-0x47f has been reserved
[    0.256988] system 00:09: ioport range 0x480-0x4ff has been reserved
[    0.256991] system 00:09: ioport range 0x500-0x55f has been reserved
[    0.256993] system 00:09: ioport range 0x560-0x57f has been reserved
[    0.256995] system 00:09: ioport range 0x600-0x600 has been reserved
[    0.256998] system 00:09: ioport range 0x800-0x803 has been reserved
[    0.257000] system 00:09: ioport range 0xc00-0xca7 has been reserved
[    0.257003] system 00:09: ioport range 0xcb0-0xcde has been reserved
[    0.257005] system 00:09: ioport range 0xf50-0xf5f has been reserved
[    0.257012] system 00:0a: ioport range 0xca8-0xca8 has been reserved
[    0.257014] system 00:0a: ioport range 0xcac-0xcac has been reserved
[    0.292121] pci 0000:15:0d.0: PCI bridge, secondary bus 0000:16
[    0.292123] pci 0000:15:0d.0:   IO window: disabled
[    0.292127] pci 0000:15:0d.0:   MEM window: 0xe0000000-0xe3ffffff
[    0.292130] pci 0000:15:0d.0:   PREFETCH window: disabled
[    0.292134] pci 0000:00:07.0: PCI bridge, secondary bus 0000:15
[    0.292137] pci 0000:00:07.0:   IO window: 0x6000-0x6fff
[    0.292141] pci 0000:00:07.0:   MEM window: 0xe0000000-0xe40fffff
[    0.292144] pci 0000:00:07.0:   PREFETCH window: 
0x000000e4100000-0x000000e41fffff
[    0.292149] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:22
[    0.292151] pci 0000:00:0a.0:   IO window: disabled
[    0.292154] pci 0000:00:0a.0:   MEM window: 0xe7600000-0xe77fffff
[    0.292156] pci 0000:00:0a.0:   PREFETCH window: 
0x000000e5000000-0x000000e5ffffff
[    0.292160] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:2d
[    0.292162] pci 0000:00:0b.0:   IO window: disabled
[    0.292164] pci 0000:00:0b.0:   MEM window: disabled
[    0.292166] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.292170] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:05
[    0.292172] pci 0000:00:0c.0:   IO window: 0x5000-0x5fff
[    0.292175] pci 0000:00:0c.0:   MEM window: 0xe7800000-0xe7afffff
[    0.292178] pci 0000:00:0c.0:   PREFETCH window: 
0x000000e7c00000-0x000000e7cfffff
[    0.292182] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:17
[    0.292184] pci 0000:00:0d.0:   IO window: disabled
[    0.292187] pci 0000:00:0d.0:   MEM window: 0xe7d00000-0xe7efffff
[    0.292190] pci 0000:00:0d.0:   PREFETCH window: 
0x000000e6000000-0x000000e6ffffff
[    0.292193] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:09
[    0.292195] pci 0000:00:0e.0:   IO window: disabled
[    0.292197] pci 0000:00:0e.0:   MEM window: disabled
[    0.292200] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.292207] pci 0000:00:07.0: setting latency timer to 64
[    0.292211] pci 0000:15:0d.0: setting latency timer to 64
[    0.292218] pci 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.292220] pci 0000:00:0a.0: setting latency timer to 64
[    0.292225] pci 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.292227] pci 0000:00:0b.0: setting latency timer to 64
[    0.292232] pci 0000:00:0c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.292234] pci 0000:00:0c.0: setting latency timer to 64
[    0.292238] pci 0000:00:0d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.292241] pci 0000:00:0d.0: setting latency timer to 64
[    0.292245] pci 0000:00:0e.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[    0.292248] pci 0000:00:0e.0: setting latency timer to 64
[    0.292250] bus: 00 index 0 io port: [0, ffff]
[    0.292252] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.292254] bus: 15 index 0 io port: [6000, 6fff]
[    0.292256] bus: 15 index 1 mmio: [e0000000, e40fffff]
[    0.292258] bus: 15 index 2 mmio: [e4100000, e41fffff]
[    0.292260] bus: 15 index 3 mmio: [0, 0]
[    0.292262] bus: 16 index 0 mmio: [0, 0]
[    0.292264] bus: 16 index 1 mmio: [e0000000, e3ffffff]
[    0.292265] bus: 16 index 2 mmio: [0, 0]
[    0.292267] bus: 16 index 3 mmio: [0, 0]
[    0.292269] bus: 22 index 0 mmio: [0, 0]
[    0.292271] bus: 22 index 1 mmio: [e7600000, e77fffff]
[    0.292273] bus: 22 index 2 mmio: [e5000000, e5ffffff]
[    0.292274] bus: 22 index 3 mmio: [0, 0]
[    0.292276] bus: 2d index 0 mmio: [0, 0]
[    0.292278] bus: 2d index 1 mmio: [0, 0]
[    0.292279] bus: 2d index 2 mmio: [0, 0]
[    0.292281] bus: 2d index 3 mmio: [0, 0]
[    0.292283] bus: 05 index 0 io port: [5000, 5fff]
[    0.292285] bus: 05 index 1 mmio: [e7800000, e7afffff]
[    0.292286] bus: 05 index 2 mmio: [e7c00000, e7cfffff]
[    0.292288] bus: 05 index 3 mmio: [0, 0]
[    0.292290] bus: 17 index 0 mmio: [0, 0]
[    0.292292] bus: 17 index 1 mmio: [e7d00000, e7efffff]
[    0.292294] bus: 17 index 2 mmio: [e6000000, e6ffffff]
[    0.292296] bus: 17 index 3 mmio: [0, 0]
[    0.292297] bus: 09 index 0 mmio: [0, 0]
[    0.292299] bus: 09 index 1 mmio: [0, 0]
[    0.292300] bus: 09 index 2 mmio: [0, 0]
[    0.292302] bus: 09 index 3 mmio: [0, 0]
[    0.292310] NET: Registered protocol family 2
[    0.292968] Switched to high resolution mode on CPU 0
[    0.293509] Switched to high resolution mode on CPU 2
[    0.293720] Switched to high resolution mode on CPU 1
[    0.293724] Switched to high resolution mode on CPU 3
[    0.295056] IP route cache hash table entries: 32768 (order: 5, 131072 
bytes)
[    0.295301] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.295980] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.296337] TCP: Hash tables configured (established 131072 bind 65536)
[    0.296340] TCP reno registered
[    0.296344] TCP ESTATS hash table entries: 65536 (order: 6, 262144 bytes)
[    0.296490] Web100 2.5.22 200810130047 net100: Initialization successful
[    0.298091] NET: Registered protocol family 1
[    0.298195] checking if image is initramfs...it isn't (no cpio magic); 
looks like an initrd
[    0.344654] Freeing initrd memory: 1442k freed
[    0.345960] Machine check exception polling timer started.
[    0.346455] IA-32 Microcode Update Driver: v1.14a 
<>
[    0.346581] microcode: CPU0 not a capable Intel processor
[    0.346605] microcode: CPU1 not a capable Intel processor
[    0.346628] microcode: CPU2 not a capable Intel processor
[    0.346653] microcode: CPU3 not a capable Intel processor
[    0.347326] audit: initializing netlink socket (disabled)
[    0.347349] type=2000 audit(1266968456.347:1): initialized
[    0.353206] highmem bounce pool size: 64 pages
[    0.353212] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.356454] VFS: Disk quotas dquot_6.5.1
[    0.356547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.357606] msgmni has been set to 1722
[    0.357733] SELinux:  Registering netfilter hooks
[    0.357979] Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 253)
[    0.357982] io scheduler noop registered
[    0.357984] io scheduler anticipatory registered
[    0.357985] io scheduler deadline registered
[    0.357996] io scheduler cfq registered (default)
[    0.358009] pci 0000:00:01.0: Boot video device
[    0.358282] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[    0.358306] pcieport-driver 0000:00:0a.0: found MSI capability
[    0.358334] pci_express 0000:00:0a.0:pcie00: allocate port service
[    0.358399] pci_express 0000:00:0a.0:pcie01: allocate port service
[    0.358488] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    0.358507] pcieport-driver 0000:00:0b.0: found MSI capability
[    0.358529] pci_express 0000:00:0b.0:pcie00: allocate port service
[    0.358590] pci_express 0000:00:0b.0:pcie01: allocate port service
[    0.358677] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    0.358697] pcieport-driver 0000:00:0c.0: found MSI capability
[    0.358720] pci_express 0000:00:0c.0:pcie00: allocate port service
[    0.358781] pci_express 0000:00:0c.0:pcie01: allocate port service
[    0.358864] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    0.358884] pcieport-driver 0000:00:0d.0: found MSI capability
[    0.358906] pci_express 0000:00:0d.0:pcie00: allocate port service
[    0.358967] pci_express 0000:00:0d.0:pcie01: allocate port service
[    0.359057] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[    0.359076] pcieport-driver 0000:00:0e.0: found MSI capability
[    0.359097] pci_express 0000:00:0e.0:pcie00: allocate port service
[    0.359168] pci_express 0000:00:0e.0:pcie01: allocate port service
[    0.359352] aer 0000:00:0a.0:pcie01: AER service couldn't init device: no 
_OSC support
[    0.359361] aer 0000:00:0b.0:pcie01: AER service couldn't init device: no 
_OSC support
[    0.359369] aer 0000:00:0c.0:pcie01: AER service couldn't init device: no 
_OSC support
[    0.359384] aer 0000:00:0d.0:pcie01: AER service couldn't init device: no 
_OSC support
[    0.359392] aer 0000:00:0e.0:pcie01: AER service couldn't init device: no 
_OSC support
[    0.359740] vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 
3072k, total 16384k
[    0.359742] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[    0.359744] vesafb: protected mode interface info at c000:5446
[    0.359746] vesafb: pmi: set display start = c00c54da, set palette = 
c00c5526
[    0.359748] vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 
30b0 30b2 30b4 
[    0.359754] vesafb: scrolling: redraw
[    0.359756] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.431711] Console: switching to colour frame buffer device 128x48
[    0.498317] fb0: VESA VGA frame buffer device
[    0.498923] isapnp: Scanning for PnP cards...
[    0.811979] isapnp: No Plug & Play device found
[    0.816584] Non-volatile memory driver v1.2
[    0.816675] Linux agpgart interface v0.103
[    0.816738] [drm] Initialized drm 1.1.0 20060810
[    0.816740] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.061135] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.061788] Floppy drive(s): fd0 is 1.44M
[    4.072021] floppy0: no floppy controllers found
[    4.074197] brd: module loaded
[    4.074277] Fixed MDIO Bus: probed
[    4.074284] console [netcon0] enabled
[    4.074286] netconsole: network logging started
[    4.074379] input: Macintosh mouse button emulation as /class/input/input0
[    4.074394] Uniform Multi-Platform E-IDE driver
[    4.075008] ide_generic: please use "probe_mask=0x3f" module parameter for 
probing all legacy ISA IDE ports
[    4.075018] Probing IDE interface ide0...
[    4.746315] hda: UJDA770 DVD/CDRW, ATAPI CD/DVD-ROM drive
[    5.052086] Probing IDE interface ide1...
[    5.564098] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.564120] ide1 at 0x170-0x177,0x376 on irq 15
[    5.564927] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[    5.564932] Uniform CD-ROM driver Revision: 3.20
[    6.878046] Driver 'sd' needs updating - please use bus_type methods
[    6.878099] Driver 'sr' needs updating - please use bus_type methods
[    6.878718] PNP: No PS/2 controller found. Probing ports directly.
[    6.880372] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.880387] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.881504] mice: PS/2 mouse device common for all mice
[    6.923304] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    6.923332] rtc0: alarms up to one year
[    6.923645] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: 

[    6.923758] EISA: Probing bus 0 at eisa.0
[    6.923761] EISA: Cannot allocate resource for mainboard
[    6.923967] cpuidle: using governor ladder
[    6.923969] cpuidle: using governor menu
[    6.923973] No iBFT detected.
[    6.924119] Netfilter messages via NETLINK v0.30.
[    6.924178] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    6.924388] ctnetlink v0.93: registering with nfnetlink.
[    6.924985] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.925014] Initializing XFRM netlink socket
[    6.925019] NET: Registered protocol family 17
[    6.925294] RPC: Registered udp transport module.
[    6.925295] RPC: Registered tcp transport module.
[    6.925317] Starting balanced_irq
[    6.925369] Using IPI No-Shortcut mode
[    6.925592] registered taskstats version 1
[    6.925743]   Magic number: 14:277:707
[    7.026073] RAMDISK: Compressed image found at block 0
[    7.086191] EXT2-fs warning: checktime reached, running e2fsck is 
recommended
[    7.086204] VFS: Mounted root (ext2 filesystem).
[    7.156022] Failed initialization of WD-7000 SCSI card!
[    7.171840] usbcore: registered new interface driver usbfs
[    7.171916] usbcore: registered new interface driver hub
[    7.172030] usbcore: registered new device driver usb
[    7.175205] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    7.175240] ehci_hcd 0000:00:04.2: PCI INT C -> GSI 21 (level, low) -> IRQ 
21
[    7.175256] ehci_hcd 0000:00:04.2: setting latency timer to 64
[    7.175259] ehci_hcd 0000:00:04.2: EHCI Host Controller
[    7.175352] drivers/usb/core/inode.c: creating file 'devices'
[    7.175355] drivers/usb/core/inode.c: creating file '001'
[    7.175359] ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus 
number 1
[    7.175367] ehci_hcd 0000:00:04.2: reset hcs_params 0x2294 dbg=0 cc=2 
pcc=2 ports=4
[    7.175373] ehci_hcd 0000:00:04.2: reset portroute 1 0 1 0 
[    7.175376] ehci_hcd 0000:00:04.2: reset hcc_params e806 thresh 0 uframes 
256/512/1024 park
[    7.175394] ehci_hcd 0000:00:04.2: park 0
[    7.175399] ehci_hcd 0000:00:04.2: reset command 080b02 park=3 ithresh=8 
period=1024 Reset HALT
[    7.175404] ehci_hcd 0000:00:04.2: ...powerup ports...
[    7.196026] ehci_hcd 0000:00:04.2: MWI active
[    7.196027] ehci_hcd 0000:00:04.2: supports USB remote wakeup
[    7.196039] ehci_hcd 0000:00:04.2: irq 21, io mem 0xe7fedc00
[    7.196043] ehci_hcd 0000:00:04.2: reset command 080b02 park=3 ithresh=8 
period=1024 Reset HALT
[    7.196049] ehci_hcd 0000:00:04.2: init command 010009 (park)=0 ithresh=1 
period=256 RUN
[    7.202016] ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[    7.202046] usb usb1: default language 0x0409
[    7.202089] usb usb1: uevent
[    7.202160] usb usb1: usb_probe_device
[    7.202162] usb usb1: configuration #1 chosen from 1 choice
[    7.202168] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    7.202180] usb 1-0:1.0: uevent
[    7.202238] hub 1-0:1.0: usb_probe_interface
[    7.202240] hub 1-0:1.0: usb_probe_interface - got id
[    7.202242] hub 1-0:1.0: USB hub found
[    7.202249] hub 1-0:1.0: 4 ports detected
[    7.202251] hub 1-0:1.0: standalone hub
[    7.202252] hub 1-0:1.0: individual port power switching
[    7.202254] hub 1-0:1.0: individual port over-current protection
[    7.202256] hub 1-0:1.0: power on to power good time: 20ms
[    7.202260] hub 1-0:1.0: local power source is good
[    7.202262] hub 1-0:1.0: enabling power on all ports
[    7.303028] ehci_hcd 0000:00:04.2: GetStatus port 4 status 001403 POWER 
sig=k CSC CONNECT
[    7.303030] hub 1-0:1.0: port 4: status 0501 change 0001
[    7.404036] hub 1-0:1.0: state 7 ports 4 chg 0010 evt 0000
[    7.404172] drivers/usb/core/inode.c: creating file '001'
[    7.404194] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[    7.404204] ehci_hcd 0000:00:04.2: port 4 low speed --> companion
[    7.404258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.404261] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    7.404263] usb usb1: Product: EHCI Host Controller
[    7.404264] usb usb1: Manufacturer: Linux 2.6.27.37-web100 ehci_hcd
[    7.404266] usb usb1: SerialNumber: 0000:00:04.2
[    7.404283] ehci_hcd 0000:00:09.2: PCI INT A -> GSI 3 (level, low) -> IRQ 3
[    7.404290] ehci_hcd 0000:00:09.2: setting latency timer to 64
[    7.404293] ehci_hcd 0000:00:09.2: EHCI Host Controller
[    7.404373] drivers/usb/core/inode.c: creating file '002'
[    7.404376] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus 
number 2
[    7.404384] ehci_hcd 0000:00:09.2: reset hcs_params 0x2214 dbg=0 cc=2 
pcc=2 ordered ports=4
[    7.404388] ehci_hcd 0000:00:09.2: reset hcc_params a010 thresh 1 uframes 
1024
[    7.404404] ehci_hcd 0000:00:09.2: reset command 080002 (park)=0 ithresh=8 
period=1024 Reset HALT
[    7.404409] ehci_hcd 0000:00:09.2: ...powerup ports...
[    7.425021] ehci_hcd 0000:00:09.2: MWI active
[    7.425023] ehci_hcd 0000:00:09.2: supports USB remote wakeup
[    7.425031] ehci_hcd 0000:00:09.2: irq 3, io mem 0xe7fea000
[    7.425035] ehci_hcd 0000:00:09.2: reset command 080002 (park)=0 ithresh=8 
period=1024 Reset HALT
[    7.425041] ehci_hcd 0000:00:09.2: init command 010001 (park)=0 ithresh=1 
period=1024 RUN
[    7.455021] ehci_hcd 0000:00:04.2: GetStatus port 4 status 003002 POWER 
OWNER sig=se0 CSC
[    7.461016] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[    7.461029] usb usb2: default language 0x0409
[    7.461057] usb usb2: uevent
[    7.461123] usb usb2: usb_probe_device
[    7.461125] usb usb2: configuration #1 chosen from 1 choice
[    7.461129] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    7.461140] usb 2-0:1.0: uevent
[    7.461199] hub 2-0:1.0: usb_probe_interface
[    7.461200] hub 2-0:1.0: usb_probe_interface - got id
[    7.461202] hub 2-0:1.0: USB hub found
[    7.461207] hub 2-0:1.0: 4 ports detected
[    7.461208] hub 2-0:1.0: standalone hub
[    7.461210] hub 2-0:1.0: individual port power switching
[    7.461211] hub 2-0:1.0: individual port over-current protection
[    7.461213] hub 2-0:1.0: power on to power good time: 20ms
[    7.461216] hub 2-0:1.0: local power source is good
[    7.461218] hub 2-0:1.0: enabling power on all ports
[    7.562036] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[    7.562107] drivers/usb/core/inode.c: creating file '001'
[    7.562190] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    7.562192] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    7.562194] usb usb2: Product: EHCI Host Controller
[    7.562196] usb usb2: Manufacturer: Linux 2.6.27.37-web100 ehci_hcd
[    7.562197] usb usb2: SerialNumber: 0000:00:09.2
[    7.565074] USB Universal Host Controller Interface driver v3.0
[    7.567998] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) 
Driver
[    7.568001] ohci_hcd: block sizes: ed 64 td 64
[    7.568040] ohci_hcd 0000:00:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 
21
[    7.568056] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    7.568059] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    7.568120] drivers/usb/core/inode.c: creating file '003'
[    7.568134] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus 
number 3
[    7.568139] ohci_hcd 0000:00:04.0: enabled NEC chipset lost interrupt quirk
[    7.568160] ohci_hcd 0000:00:04.0: created debug files
[    7.568162] ohci_hcd 0000:00:04.0: supports USB remote wakeup
[    7.568170] ohci_hcd 0000:00:04.0: irq 21, io mem 0xe7fef000
[    7.648022] ohci_hcd 0000:00:04.0: OHCI controller state
[    7.648025] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
[    7.648028] ohci_hcd 0000:00:04.0: control 0x083 HCFS=operational CBSR=3
[    7.648031] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
[    7.648035] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
[    7.648038] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[    7.648046] ohci_hcd 0000:00:04.0: hcca frame #001f
[    7.648050] ohci_hcd 0000:00:04.0: roothub.a 0f000202 POTPGT=15 NPS 
NDP=2(2)
[    7.648053] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
[    7.648056] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
[    7.648060] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
[    7.648064] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
[    7.648078] usb usb3: default language 0x0409
[    7.648139] usb usb3: uevent
[    7.648191] usb usb3: usb_probe_device
[    7.648194] usb usb3: configuration #1 chosen from 1 choice
[    7.648200] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    7.648212] usb 3-0:1.0: uevent
[    7.648252] hub 3-0:1.0: usb_probe_interface
[    7.648254] hub 3-0:1.0: usb_probe_interface - got id
[    7.648256] hub 3-0:1.0: USB hub found
[    7.648266] hub 3-0:1.0: 2 ports detected
[    7.648267] hub 3-0:1.0: standalone hub
[    7.648268] hub 3-0:1.0: no power switching (usb 1.0)
[    7.648270] hub 3-0:1.0: global over-current protection
[    7.648272] hub 3-0:1.0: power on to power good time: 30ms
[    7.648277] hub 3-0:1.0: local power source is good
[    7.648278] hub 3-0:1.0: no over-current condition exists
[    7.648281] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    7.749034] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    7.749088] drivers/usb/core/inode.c: creating file '001'
[    7.749166] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    7.749168] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    7.749170] usb usb3: Product: OHCI Host Controller
[    7.749172] usb usb3: Manufacturer: Linux 2.6.27.37-web100 ohci_hcd
[    7.749174] usb usb3: SerialNumber: 0000:00:04.0
[    7.749194] ohci_hcd 0000:00:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 
21
[    7.749200] ohci_hcd 0000:00:04.1: setting latency timer to 64
[    7.749203] ohci_hcd 0000:00:04.1: OHCI Host Controller
[    7.749249] drivers/usb/core/inode.c: creating file '004'
[    7.749253] ohci_hcd 0000:00:04.1: new USB bus registered, assigned bus 
number 4
[    7.749256] ohci_hcd 0000:00:04.1: enabled NEC chipset lost interrupt quirk
[    7.749273] ohci_hcd 0000:00:04.1: created debug files
[    7.749275] ohci_hcd 0000:00:04.1: supports USB remote wakeup
[    7.749279] ohci_hcd 0000:00:04.1: irq 21, io mem 0xe7fee000
[    7.830021] ohci_hcd 0000:00:04.1: OHCI controller state
[    7.830024] ohci_hcd 0000:00:04.1: OHCI 1.0, NO legacy support registers
[    7.830027] ohci_hcd 0000:00:04.1: control 0x083 HCFS=operational CBSR=3
[    7.830030] ohci_hcd 0000:00:04.1: cmdstatus 0x00000 SOC=0
[    7.830034] ohci_hcd 0000:00:04.1: intrstatus 0x00000004 SF
[    7.830037] ohci_hcd 0000:00:04.1: intrenable 0x8000001a MIE UE RD WDH
[    7.830044] ohci_hcd 0000:00:04.1: hcca frame #001f
[    7.830048] ohci_hcd 0000:00:04.1: roothub.a 0f000202 POTPGT=15 NPS 
NDP=2(2)
[    7.830051] ohci_hcd 0000:00:04.1: roothub.b 00000000 PPCM=0000 DR=0000
[    7.830054] ohci_hcd 0000:00:04.1: roothub.status 00008000 DRWE
[    7.830057] ohci_hcd 0000:00:04.1: roothub.portstatus [0] 0x00000100 PPS
[    7.830061] ohci_hcd 0000:00:04.1: roothub.portstatus [1] 0x00010301 CSC 
LSDA PPS CCS
[    7.830068] usb usb4: default language 0x0409
[    7.830104] usb usb4: uevent
[    7.830163] usb usb4: usb_probe_device
[    7.830165] usb usb4: configuration #1 chosen from 1 choice
[    7.830169] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    7.830181] usb 4-0:1.0: uevent
[    7.830219] hub 4-0:1.0: usb_probe_interface
[    7.830221] hub 4-0:1.0: usb_probe_interface - got id
[    7.830223] hub 4-0:1.0: USB hub found
[    7.830231] hub 4-0:1.0: 2 ports detected
[    7.830233] hub 4-0:1.0: standalone hub
[    7.830234] hub 4-0:1.0: no power switching (usb 1.0)
[    7.830236] hub 4-0:1.0: global over-current protection
[    7.830238] hub 4-0:1.0: power on to power good time: 30ms
[    7.830242] hub 4-0:1.0: local power source is good
[    7.830243] hub 4-0:1.0: no over-current condition exists
[    7.830245] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    7.931022] ohci_hcd 0000:00:04.1: GetStatus roothub.portstatus [1] = 
0x00010301 CSC LSDA PPS CCS
[    7.931025] hub 4-0:1.0: port 2: status 0301 change 0001
[    8.032029] hub 4-0:1.0: state 7 ports 2 chg 0004 evt 0000
[    8.032080] drivers/usb/core/inode.c: creating file '001'
[    8.032095] hub 4-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[    8.032140] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.032142] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    8.032144] usb usb4: Product: OHCI Host Controller
[    8.032146] usb usb4: Manufacturer: Linux 2.6.27.37-web100 ohci_hcd
[    8.032148] usb usb4: SerialNumber: 0000:00:04.1
[    8.032168] ohci_hcd 0000:00:09.0: PCI INT A -> GSI 3 (level, low) -> IRQ 3
[    8.032175] ohci_hcd 0000:00:09.0: setting latency timer to 64
[    8.032178] ohci_hcd 0000:00:09.0: OHCI Host Controller
[    8.032228] drivers/usb/core/inode.c: creating file '005'
[    8.032231] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus 
number 5
[    8.032247] ohci_hcd 0000:00:09.0: created debug files
[    8.032251] ohci_hcd 0000:00:09.0: irq 3, io mem 0xe7fec000
[    8.089029] ohci_hcd 0000:00:09.0: OHCI controller state
[    8.089032] ohci_hcd 0000:00:09.0: OHCI 1.0, NO legacy support registers
[    8.089036] ohci_hcd 0000:00:09.0: control 0x083 HCFS=operational CBSR=3
[    8.089040] ohci_hcd 0000:00:09.0: cmdstatus 0x00000 SOC=0
[    8.089043] ohci_hcd 0000:00:09.0: intrstatus 0x00000004 SF
[    8.089047] ohci_hcd 0000:00:09.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[    8.089058] ohci_hcd 0000:00:09.0: hcca frame #0007
[    8.089062] ohci_hcd 0000:00:09.0: roothub.a 03000202 POTPGT=3 NPS NDP=2(2)
[    8.089066] ohci_hcd 0000:00:09.0: roothub.b 00000000 PPCM=0000 DR=0000
[    8.089069] ohci_hcd 0000:00:09.0: roothub.status 00008000 DRWE
[    8.089073] ohci_hcd 0000:00:09.0: roothub.portstatus [0] 0x00000100 PPS
[    8.089077] ohci_hcd 0000:00:09.0: roothub.portstatus [1] 0x00000100 PPS
[    8.089084] usb usb5: default language 0x0409
[    8.089111] usb usb5: uevent
[    8.089174] usb usb5: usb_probe_device
[    8.089176] usb usb5: configuration #1 chosen from 1 choice
[    8.089180] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    8.089191] usb 5-0:1.0: uevent
[    8.089228] hub 5-0:1.0: usb_probe_interface
[    8.089230] hub 5-0:1.0: usb_probe_interface - got id
[    8.089232] hub 5-0:1.0: USB hub found
[    8.089241] hub 5-0:1.0: 2 ports detected
[    8.089242] hub 5-0:1.0: standalone hub
[    8.089244] hub 5-0:1.0: no power switching (usb 1.0)
[    8.089245] hub 5-0:1.0: global over-current protection
[    8.089247] hub 5-0:1.0: power on to power good time: 6ms
[    8.089251] hub 5-0:1.0: local power source is good
[    8.089253] hub 5-0:1.0: no over-current condition exists
[    8.089255] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    8.138020] ohci_hcd 0000:00:04.1: GetStatus roothub.portstatus [1] = 
0x00100303 PRSC LSDA PPS PES CCS
[    8.189018] usb 4-2: new low speed USB device using ohci_hcd and address 2
[    8.190082] drivers/usb/core/inode.c: creating file '001'
[    8.190138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    8.190141] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    8.190142] usb usb5: Product: OHCI Host Controller
[    8.190144] usb usb5: Manufacturer: Linux 2.6.27.37-web100 ohci_hcd
[    8.190146] usb usb5: SerialNumber: 0000:00:09.0
[    8.190167] ohci_hcd 0000:00:09.1: PCI INT A -> GSI 3 (level, low) -> IRQ 3
[    8.190174] ohci_hcd 0000:00:09.1: setting latency timer to 64
[    8.190177] ohci_hcd 0000:00:09.1: OHCI Host Controller
[    8.190225] drivers/usb/core/inode.c: creating file '006'
[    8.190228] ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus 
number 6
[    8.190245] ohci_hcd 0000:00:09.1: created debug files
[    8.190249] ohci_hcd 0000:00:09.1: irq 3, io mem 0xe7feb000
[    8.247028] ohci_hcd 0000:00:09.1: OHCI controller state
[    8.247032] ohci_hcd 0000:00:09.1: OHCI 1.0, NO legacy support registers
[    8.247036] ohci_hcd 0000:00:09.1: control 0x083 HCFS=operational CBSR=3
[    8.247039] ohci_hcd 0000:00:09.1: cmdstatus 0x00000 SOC=0
[    8.247043] ohci_hcd 0000:00:09.1: intrstatus 0x00000004 SF
[    8.247047] ohci_hcd 0000:00:09.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[    8.247058] ohci_hcd 0000:00:09.1: hcca frame #0007
[    8.247062] ohci_hcd 0000:00:09.1: roothub.a 03000202 POTPGT=3 NPS NDP=2(2)
[    8.247065] ohci_hcd 0000:00:09.1: roothub.b 00000000 PPCM=0000 DR=0000
[    8.247069] ohci_hcd 0000:00:09.1: roothub.status 00008000 DRWE
[    8.247073] ohci_hcd 0000:00:09.1: roothub.portstatus [0] 0x00000100 PPS
[    8.247077] ohci_hcd 0000:00:09.1: roothub.portstatus [1] 0x00000100 PPS
[    8.247084] usb usb6: default language 0x0409
[    8.247118] usb usb6: uevent
[    8.247177] usb usb6: usb_probe_device
[    8.247179] usb usb6: configuration #1 chosen from 1 choice
[    8.247183] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    8.247194] usb 6-0:1.0: uevent
[    8.247231] hub 6-0:1.0: usb_probe_interface
[    8.247233] hub 6-0:1.0: usb_probe_interface - got id
[    8.247235] hub 6-0:1.0: USB hub found
[    8.247243] hub 6-0:1.0: 2 ports detected
[    8.247244] hub 6-0:1.0: standalone hub
[    8.247246] hub 6-0:1.0: no power switching (usb 1.0)
[    8.247247] hub 6-0:1.0: global over-current protection
[    8.247249] hub 6-0:1.0: power on to power good time: 6ms
[    8.247254] hub 6-0:1.0: local power source is good
[    8.247255] hub 6-0:1.0: no over-current condition exists
[    8.247258] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    8.297018] ohci_hcd 0000:00:04.1: GetStatus roothub.portstatus [1] = 
0x00100303 PRSC LSDA PPS PES CCS
[    8.348089] drivers/usb/core/inode.c: creating file '001'
[    8.348162] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    8.348164] usb usb6: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    8.348166] usb usb6: Product: OHCI Host Controller
[    8.348168] usb usb6: Manufacturer: Linux 2.6.27.37-web100 ohci_hcd
[    8.348169] usb usb6: SerialNumber: 0000:00:09.1
[    8.371050] usb 4-2: skipped 1 descriptor after interface
[    8.371052] usb 4-2: skipped 1 descriptor after interface
[    8.374047] usb 4-2: default language 0x0409
[    8.382077] usb 4-2: uevent
[    8.382151] usb 4-2: usb_probe_device
[    8.382153] usb 4-2: configuration #1 chosen from 1 choice
[    8.389048] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[    8.389060] usb 4-2:1.0: uevent
[    8.393132] usb 4-2: adding 4-2:1.1 (config #1, interface 1)
[    8.393143] usb 4-2:1.1: uevent
[    8.397126] drivers/usb/core/inode.c: creating file '002'
[    8.397205] usb 4-2: New USB device found, idVendor=0624, idProduct=0296
[    8.397207] usb 4-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    8.397209] usb 4-2: Product: IBM 73P5832
[    8.397210] usb 4-2: Manufacturer: Avocent
[    8.397216] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    8.397235] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    8.397241] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    8.397313] usbcore: registered new interface driver libusual
[    8.402284] usbcore: registered new interface driver hiddev
[    8.402293] usbhid 4-2:1.0: usb_probe_interface
[    8.402295] usbhid 4-2:1.0: usb_probe_interface - got id
[    8.409344] input: Avocent IBM 73P5832 as /class/input/input1
[    8.411100] input,hidraw0: USB HID v1.10 Keyboard [Avocent IBM 73P5832] on 
usb-0000:00:04.1-2
[    8.411108] usbhid 4-2:1.1: usb_probe_interface
[    8.411110] usbhid 4-2:1.1: usb_probe_interface - got id
[    8.419461] input: Avocent IBM 73P5832 as /class/input/input2
[    8.422172] input,hidraw1: USB HID v1.10 Mouse [Avocent IBM 73P5832] on 
usb-0000:00:04.1-2
[    8.422230] usbcore: registered new interface driver usbhid
[    8.422233] usbhid: v2.6:USB HID core driver
[    8.425860] Initializing USB Mass Storage driver...
[    8.425936] usbcore: registered new interface driver usb-storage
[    8.425939] USB Mass Storage support registered.
[    8.954021] ohci_hcd 0000:00:04.0: auto-stop root hub
[    9.204027] ohci_hcd 0000:00:09.0: auto-stop root hub
[    9.454024] ohci_hcd 0000:00:09.1: auto-stop root hub
[    9.698022] hub 1-0:1.0: hub_suspend
[    9.698027] usb usb1: bus auto-suspend
[    9.698030] ehci_hcd 0000:00:04.2: suspend root hub
[    9.698065] hub 2-0:1.0: hub_suspend
[    9.698068] usb usb2: bus auto-suspend
[    9.698069] ehci_hcd 0000:00:09.2: suspend root hub
[    9.749014] hub 3-0:1.0: hub_suspend
[    9.749017] usb usb3: bus auto-suspend
[    9.749020] ohci_hcd 0000:00:04.0: suspend root hub
[   10.704023] hub 5-0:1.0: hub_suspend
[   10.704029] usb usb5: bus auto-suspend
[   10.704034] ohci_hcd 0000:00:09.0: suspend root hub
[   10.704040] hub 6-0:1.0: hub_suspend
[   10.704042] usb usb6: bus auto-suspend
[   10.704046] ohci_hcd 0000:00:09.1: suspend root hub
[   16.452906] Warning: /proc/ide/hd?/settings interface is obsolete, and 
will be removed soon!
[   16.543626] ISO 9660 Extensions: Microsoft Joliet Level 3
[   16.546764] ISO 9660 Extensions: RRIP_1991A
[   17.975241] cloop: Initializing cloop v2.628
[   17.976363] cloop: loaded (max 8 devices)
[   18.367495] cloop: /cdrom/KNOPPIX/KNOPPIX: 28770 blocks, 65536 
bytes/block, largest block is 65562 bytes.
[   19.198691] cloop: preloaded 256 blocks into cache.
[   19.262796] ISO 9660 Extensions: RRIP_1991A
[   21.030429] aufs 20090126
[   26.095556] Freeing unused kernel memory: 432k freed
[   26.095626] Write protecting the kernel text: 2968k
[   26.095655] Write protecting the kernel read-only data: 1356k
[   30.211102] input: Power Button (FF) as /class/input/input3
[   30.213140] ACPI: Power Button (FF) [PWRF]
[   30.346600] processor ACPI0007:00: registered as cooling_device0
[   30.346688] processor ACPI0007:01: registered as cooling_device1
[   30.346770] processor ACPI0007:02: registered as cooling_device2
[   30.346853] processor ACPI0007:03: registered as cooling_device3
[   30.380697] ACPI: WMI: Mapper loaded
[   31.726725] usb usb3: uevent
[   31.726745] usb 3-0:1.0: uevent
[   31.726776] usb usb4: uevent
[   31.726795] usb 4-0:1.0: uevent
[   31.726813] usb 4-2: uevent
[   31.726829] usb 4-2:1.0: uevent
[   31.726846] usb 4-2:1.1: uevent
[   31.726879] usb usb1: uevent
[   31.726895] usb 1-0:1.0: uevent
[   31.727046] usb usb5: uevent
[   31.727062] usb 5-0:1.0: uevent
[   31.727092] usb usb6: uevent
[   31.727108] usb 6-0:1.0: uevent
[   31.727155] usb usb2: uevent
[   31.727172] usb 2-0:1.0: uevent
[   33.230960] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.234011] myri10ge: Version 1.5.0
[   33.234079] myri10ge 0000:22:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 
17
[   33.234183] myri10ge 0000:22:00.0: setting latency timer to 64
[   33.235538] firmware: requesting myri10ge_eth_z8e.dat
[   33.266057] serverworks 0000:00:08.1: IDE controller (0x1166:0x0214 rev 
0x00)
[   33.266071] Serverworks_IDE 0000:00:08.1: BAR 0: can't reserve I/O region 
[0x1f0-0x1f7]
[   33.266073] serverworks 0000:00:08.1: can't reserve resources
[   33.266079] Serverworks_IDE: probe of 0000:00:08.1 failed with error -16
[   33.541193] Adaptec aacraid driver 1.1-5[2456]-ms
[   34.415018] firmware: requesting myri10ge_eth_z8e.dat
[   34.799765] myri10ge 0000:22:00.0: MSI IRQ 218, tx bndry 4096, fw 
myri10ge_eth_z8e.dat, WC Enabled
[   34.799796] myri10ge 0000:17:00.0: enabling device (0000 -> 0002)
[   34.799825] myri10ge 0000:17:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 
16
[   34.799952] myri10ge 0000:17:00.0: setting latency timer to 64
[   34.805259] firmware: requesting myri10ge_eth_z8e.dat
[   35.177394] firmware: requesting myri10ge_eth_z8e.dat
[   35.307144] input: PC Speaker as /class/input/input4
[   35.663725] myri10ge 0000:17:00.0: MSI IRQ 218, tx bndry 4096, fw 
myri10ge_eth_z8e.dat, WC Enabled
[   35.664127] aacraid 0000:05:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 
22
[   35.664135] aacraid 0000:05:00.0: setting latency timer to 64
[   35.879015] AAC0: kernel 5.2-0[11835] Jan  9 2007
[   35.879018] AAC0: monitor 5.2-0[11835]
[   35.879021] AAC0: bios 5.2-0[11835]
[   35.879023] AAC0: serial 1C03FBD
[   35.879769] pata_acpi 0000:00:08.1: BAR 0: can't reserve I/O region 
[0x1f0-0x1f7]
[   35.879774] pata_acpi 0000:00:08.1: failed to request/iomap BARs for port 
0 (errno=-16)
[   35.879778] pata_acpi 0000:00:08.1: BAR 2: can't reserve I/O region 
[0x170-0x177]
[   35.879780] pata_acpi 0000:00:08.1: failed to request/iomap BARs for port 
1 (errno=-16)
[   35.879782] pata_acpi 0000:00:08.1: no available native port
[   35.886433] scsi0 : ServeRAID
[   35.886672] scsi 0:0:0:0: Direct-Access     ServeRA  Drive 2          V1.0 
PQ: 0 ANSI: 2
[   35.886744] sd 0:0:0:0: [sda] 585707520 512-byte hardware sectors (299882 
MB)
[   35.886756] sd 0:0:0:0: [sda] Write Protect is off
[   35.886758] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[   35.886778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.886839] sd 0:0:0:0: [sda] 585707520 512-byte hardware sectors (299882 
MB)
[   35.886849] sd 0:0:0:0: [sda] Write Protect is off
[   35.886851] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[   35.886870] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.886873]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[   35.925663] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   35.925847] scsi 0:0:1:0: Direct-Access     ServeRA  Drive 1          V1.0 
PQ: 0 ANSI: 2
[   35.925909] sd 0:0:1:0: [sdb] 585707520 512-byte hardware sectors (299882 
MB)
[   35.925920] sd 0:0:1:0: [sdb] Write Protect is off
[   35.925922] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[   35.925941] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.925986] sd 0:0:1:0: [sdb] 585707520 512-byte hardware sectors (299882 
MB)
[   35.925996] sd 0:0:1:0: [sdb] Write Protect is off
[   35.925998] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[   35.926027] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.926029]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[   35.964938] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[   35.965216] scsi 0:0:3:0: Direct-Access     ServeRA  Drive 3          V1.0 
PQ: 0 ANSI: 2
[   35.965279] sd 0:0:3:0: [sdc] 585707520 512-byte hardware sectors (299882 
MB)
[   35.965290] sd 0:0:3:0: [sdc] Write Protect is off
[   35.965292] sd 0:0:3:0: [sdc] Mode Sense: 06 00 10 00
[   35.965311] sd 0:0:3:0: [sdc] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.965353] sd 0:0:3:0: [sdc] 585707520 512-byte hardware sectors (299882 
MB)
[   35.965364] sd 0:0:3:0: [sdc] Write Protect is off
[   35.965366] sd 0:0:3:0: [sdc] Mode Sense: 06 00 10 00
[   35.965384] sd 0:0:3:0: [sdc] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[   35.965386]  sdc: unknown partition table
[   35.983546] sd 0:0:3:0: [sdc] Attached SCSI removable disk
[   35.990128] scsi 0:1:0:0: Direct-Access     IBM-ESXS ST3300655SS      BA23 
PQ: 0 ANSI: 5
[   35.992283] scsi 0:1:1:0: Direct-Access     IBM-ESXS ST3300655SS      BA23 
PQ: 0 ANSI: 5
[   35.995274] scsi 0:1:2:0: Direct-Access     IBM-ESXS VPBA300C3ETS11 N A496 
PQ: 0 ANSI: 5
[   35.998139] scsi 0:1:3:0: Direct-Access     IBM-ESXS ST3300655SS      BA23 
PQ: 0 ANSI: 5
[   36.052532] scsi 0:3:0:0: Enclosure         IBM-ESXS VSC7160          1.06 
PQ: 0 ANSI: 3
[   36.235130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.591904] sata_svw 0000:15:0e.0: version 2.3
[   36.591962] sata_svw 0000:15:0e.0: PCI INT A -> GSI 9 (level, low) -> IRQ 9
[   36.591984] sata_svw 0000:15:0e.0: setting latency timer to 64
[   36.592329] scsi1 : sata_svw
[   36.592490] scsi2 : sata_svw
[   36.592598] scsi3 : sata_svw
[   36.592706] scsi4 : sata_svw
[   36.592732] ata1: SATA max UDMA/133 mmio 
m8192@0xe4000000
 port 0xe4000000 irq 9
[   36.592735] ata2: SATA max UDMA/133 mmio 
m8192@0xe4000000
 port 0xe4000100 irq 9
[   36.592738] ata3: SATA max UDMA/133 mmio 
m8192@0xe4000000
 port 0xe4000200 irq 9
[   36.592740] ata4: SATA max UDMA/133 mmio 
m8192@0xe4000000
 port 0xe4000300 irq 9
[   36.907063] ata1: SATA link down (SStatus 4 SControl 300)
[   37.222088] ata2: SATA link down (SStatus 4 SControl 300)
[   37.537061] ata3: SATA link down (SStatus 4 SControl 300)
[   37.852076] ata4: SATA link down (SStatus 4 SControl 300)
[   37.852475] pata_serverworks 0000:00:08.1: BAR 0: can't reserve I/O region 
[0x1f0-0x1f7]
[   37.852480] pata_serverworks 0000:00:08.1: failed to request/iomap BARs 
for port 0 (errno=-16)
[   37.852484] pata_serverworks 0000:00:08.1: BAR 2: can't reserve I/O region 
[0x170-0x177]
[   37.852486] pata_serverworks 0000:00:08.1: failed to request/iomap BARs 
for port 1 (errno=-16)
[   37.852489] pata_serverworks 0000:00:08.1: no available native port
[   37.853314] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.8.0 (Aug 
14, 2008)
[   37.853345] bnx2 0000:16:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   37.853353] bnx2 0000:16:02.0: setting latency timer to 64
[   38.183395] eth2: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 
64-bit 133MHz found at mem e0000000, IRQ 20, node addr 00:14:5e:5b:0f:c3
[   38.183435] bnx2 0000:16:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   38.183443] bnx2 0000:16:03.0: setting latency timer to 64
[   38.513313] eth3: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 
64-bit 133MHz found at mem e2000000, IRQ 23, node addr 00:14:5e:5b:0f:c5
[   50.133864] fuse init (API version 7.9)
[   50.356979] warning: process `hwsetup' used the deprecated sysctl system 
call with 1.23.
[   56.796756] warning: process `hwsetup' used the deprecated sysctl system 
call with 1.49.
[   56.797001] warning: process `hwsetup' used the deprecated sysctl system 
call with 1.49.
[   71.467272] Adding 14651240k swap on /dev/sda5.  Priority:-1 extents:1 
across:14651240k
[   71.472459] Adding 12586916k swap on /dev/sdb2.  Priority:-2 extents:1 
across:12586916k
[   78.602147] EXT3-fs: sda1: couldn't mount because of unsupported optional 
features (240).
[   79.026753] EXT3-fs: sda6: couldn't mount because of unsupported optional 
features (240).
[   79.277275] EXT3-fs: sda7: couldn't mount because of unsupported optional 
features (240).
[   79.536435] EXT3-fs: sda8: couldn't mount because of unsupported optional 
features (240).
[   79.780442] EXT3-fs: sda9: couldn't mount because of unsupported optional 
features (240).
[   80.019999] cloop: Can't open device read-write
[   80.250232] EXT3-fs: sda1: couldn't mount because of unsupported optional 
features (240).
[   80.474707] attempt to access beyond end of device
[   80.474710] sda2: rw=0, want=4, limit=2
[   80.474713] EXT3-fs: unable to read superblock
[   80.827432] EXT3-fs: sda6: couldn't mount because of unsupported optional 
features (240).
[   81.043395] EXT3-fs: sda7: couldn't mount because of unsupported optional 
features (240).
[   81.259471] EXT3-fs: sda8: couldn't mount because of unsupported optional 
features (240).
[   81.478363] EXT3-fs: sda9: couldn't mount because of unsupported optional 
features (240).
[   81.777578] VFS: Can't find ext3 filesystem on dev sdb1.
[   82.072500] VFS: Can't find ext3 filesystem on dev sdb3.
[   82.282261] attempt to access beyond end of device
[   82.282264] sdb4: rw=0, want=4, limit=2
[   82.282268] EXT3-fs: unable to read superblock
[   82.537865] VFS: Can't find ext3 filesystem on dev sdb5.
[   82.735803] VFS: Can't find ext3 filesystem on dev sdb6.
[   82.928652] VFS: Can't find ext3 filesystem on dev sdb7.
[   83.122450] VFS: Can't find ext3 filesystem on dev sdc.
[  106.061018] bnx2: eth3: using MSI
[  107.170019] bnx2: eth2: using MSI
[  108.244414] myri10ge: eth1: link down
[  108.252618] myri10ge: eth1: link mismatch (Myrinet detected)
[  108.260821] myri10ge: eth1: link down
[  108.269024] myri10ge: eth1: link mismatch (Myrinet detected)
[  109.131409] bnx2: eth3 NIC Copper Link is Up, 1000 Mbps full duplex
[  109.319618] myri10ge: eth0: link down
[  109.393381] myri10ge: eth0: link up
[  110.354487] bnx2: eth2 NIC Copper Link is Up, 1000 Mbps full duplex
[  157.031803] aufs au_copy_file:197:mysqld[3760]: copying a large file 
5242880
[  158.717527] IBM machine detected. Enabling interrupts during APM calls.
[  158.717532] apm: BIOS not found.
[  161.231722] NET: Registered protocol family 10
[  161.233186] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  163.008901] warning: `ntpd' uses 32-bit capabilities (legacy support in 
use)
[  171.706016] eth3: no IPv6 routers present
[  171.738018] eth2: no IPv6 routers present
[  172.071017] eth0: no IPv6 routers present