perfSONAR User Q&A and Other Discussion

[Giovanni Cesaroni <>]

I all,
the MA is working :-)
As Chris Welti did, we imported manually the rrd xml config file in to 
the eXist DB and it works.
The install.pl managed to create the ls part of the DB but not the rrd one.

Cheers,
Giovanni


Giovanni Cesaroni wrote:
> Hi Loukik,
> thank you, while waiting I'll go on with further checks ...
>
> Loukik Kudarimoti wrote:
> > Hi Giovanni,
> >
> > This problem is not new. I am copying Jason and perfsonar-user list 
> > to see if we can come up with a quick solution. We hope to help you 
> > out with a solution soon.
> >
> > Loukik.
> >
> > Giovanni Cesaroni wrote:
> > > Loukik Kudarimoti wrote:
> > > > Giovanni,
> > > >
> > > > Lets try to finger-point the problem.
> > > ok
> > > > a) RRD MA is working ok right? (tests are ok, perfSONAR UI shows 
> > > > data and all interfaces)
> > > RRD MA is not working properly:
> > >
> > > 1- tests results:
> > > $ ./test-ma.sh
> > > Query Test
> > > End point: 
> > > http://srv4.dir.garr.it:8080/axis/services/MeasurementArchiveService
> > > Request file: ../xml/MAQueryRequest.xml
> > > Response file: ../xml/MAQueryResponse.xml
> > > [#document: null]
> > > (the same for the other 3, also for test-ls)
> > >
> > > 2- during installation I got this error:
> > > mv: cannot stat `client/MA*': No such file or directory
> > > (the same for LS)
> > >
> > > 3-
> > > perfSONAR UI does not shows any data, but it says data retrieved.
> > > > b) LS installation is ok? (tests are ok?)
> > > > c) RRD MA registration with LS is *not ok*. Correct?
> > > Yes, I see it from this line of the log:
> > > ERROR - RRDTypeMAServiceLSRegistrationComponent: Error while 
> > > registration: [unknown]: 
> > > PropertiesConfigurationComponent.getProperty: Requested Param: 
> > > service.ma.conf_filenot found
> > >
> > > > Loukik.
> > > >
> > > > Giovanni Cesaroni wrote:
> > > > > Hi,
> > > > > I forgot to say that it is still not working :-(
> > > > >
> > > > > Cheers,
> > > > > Giovanni
> > > > >
> > > > > Giovanni Cesaroni wrote:
> > > > > > Hi Vedrin,
> > > > > > comment in line
> > > > > >
> > > > > > Vedrin Jeliazkov wrote:
> > > > > > > Hi Giovanni,
> > > > > > >
> > > > > > > Giovanni Cesaroni 
> > > > > > > <>
> > > > > > >  wrote:
> > > > > > >
> > > > > > >  
> > > > > > > > Hi all,
> > > > > > > > thanks to all of you for the support.
> > > > > > > > I installed 2 tomcat with different ports.
> > > > > > > > But I have this problem:
> > > > > > > > 1- the UI tells me data retrieved without any error.
> > > > > > > > 2- in the sonar_error log of pS I found:
> > > > > > > >
> > > > > > > > 2006-10-04 13:19:59,535 ERROR - 
> > > > > > > > RRDTypeMAServiceLSRegistrationComponent: Error while 
> > > > > > > > registration: [unknown]: 
> > > > > > > > PropertiesConfigurationComponent.getProperty: Requested Param: 
> > > > > > > > service.ma.conf_filenot found     
> > > > > > >
> > > > > > > It looks like your service doesn't know where to find its RRD 
> > > > > > > description
> > > > > > > file. You've probably answered a question about its name & 
> > > > > > > location during the
> > > > > > > installation procedure. Please have a look at the following line 
> > > > > > > in your
> > > > > > > $PERFSONAR/conf/service.properties.ma file:
> > > > > > >
> > > > > > > service.ma.conf_file=
> > > > > > >   
> > > > > > This is properly defined :
> > > > > > service.ma.conf_file=/home/gins/PERFSONAR/perfSONAR-1.0/conf/rrd-database_GARR.xml 
> > > > > >
> > > > > > and the file exists and worked with the previous version.
> > > > > > > and ensure that the full path to your RRD description file is 
> > > > > > > present there.
> > > > > > > If you haven't created the RRD description file yet, then the 
> > > > > > > following
> > > > > > > instructions might be helpful:
> > > > > > >
> > > > > > > http://wiki.perfsonar.net/jra1-wiki/index.php/RRD_description_file
> > > > > > >
> > > > > > > Please note that if you're using perfSONAR-1.0, then these lines 
> > > > > > > in the RRD
> > > > > > > description file (valid for SVN versions)
> > > > > > >
> > > > > > >   
> > > > > > schema 1:
> > > > > > > <nmwg:parameters>
> > > > > > >     <nmwg:parameter 
> > > > > > > name="supportedEventType">utilization</nmwg:parameter>
> > > > > > >   </nmwg:parameters>
> > > > > > >
> > > > > > > should be replaced for all interfaces by
> > > > > > >   
> > > > > > schema 2:
> > > > > > > <nmwg:eventType>utilization</nmwg:eventType>
> > > > > > >   
> > > > > > I used the schema 2 for the the old version and it worked.
> > > > > > The schema 1 worked with the last snapshot version.
> > > > > > Now I changed again to the schema 2.
> > > > > >
> > > > > > I still have the problem.
> > > > > > This is the output of the log:
> > > > > >
> > > > > > 2006-10-04 18:38:54,716 DEBUG -
> > > > > > RRDTypeMAServiceLSRegistrationComponent:
> > > > > > register to LS 
> > > > > > [http://srv4.dir.garr.it:8081/axis/services/LookupService] with 
> > > > > > file 
> > > > > > [/home/gins/PERFSONAR/perfSONAR-1.0/conf/rrd-database_GARR.xml ]
> > > > > >
> > > > > > 2006-10-04 18:38:54,716  INFO -
> > > > > > GenericServiceLSRegistrator:
> > > > > > register to 
> > > > > > [http://srv4.dir.garr.it:8081/axis/services/LookupService]
> > > > > >
> > > > > > 2006-10-04 18:38:54,716 ERROR -
> > > > > > RRDTypeMAServiceLSRegistrationComponent:
> > > > > > Error while registration: [error.generic.xml_file_storage.fetch]: 
> > > > > > /home/gins/PERFSONAR/perfSONAR-1.0/conf/rrd-database_GARR.xml  
> > > > > > (No such file or directory)
> > > > > >
> > > > > > Any idea?
> > > > > >
> > > > > > Best regards,
> > > > > > Giovanni
> > > > > >
> > > > > > > (valid for perfSONAR-1.0 or older versions).
> > > > > > >
> > > > > > > Best regards,
> > > > > > > Vedrin
> > > > > > >
> > > > > > > PS: PerfsonarUI's error reporting is rather limited yet and the 
> > > > > > > tool won't say
> > > > > > > anything when it receives an empty response from the service, as 
> > > > > > > in your case.
> > > > > > > Newer (SVN) versions of the RRD MA service also have better 
> > > > > > > support for error
> > > > > > > reporting.
> > > > > > >  
> > > > > > >  
> > > > > > > > A note on the installation:
> > > > > > > >
> > > > > > > > Do you want the MA to use an eXist database?[y/n]: n
> > > > > > > > Processing file 
> > > > > > > > /home/gins/PERFSONAR/perfSONAR-1.0/wsdd/ma-service-undeploy.wsdd
> > > > > > > > <Admin>Done processing</Admin>
> > > > > > > > Processing file 
> > > > > > > > /home/gins/PERFSONAR/perfSONAR-1.0/wsdd/ma-service-deploy.wsdd
> > > > > > > > <Admin>Done processing</Admin>
> > > > > > > > mv: cannot stat `client/MA*': No such file or directory
> > > > > > > >
> > > > > > > > and the same for client/LS
> > > > > > > >
> > > > > > > > What do you say ?
> > > > > > > >
> > > > > > > > Thank in advance,
> > > > > > > > Giovanni
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Loukik Kudarimoti wrote:
> > > > > > > >  
> > > > > > > > > Hi Giovanni,
> > > > > > > > >
> > > > > > > > > Giovanni Cesaroni wrote:
> > > > > > > > >  
> > > > > > > > > > Hi Loukik,
> > > > > > > > > > I installed the latest snapshot version of the MA and it 
> > > > > > > > > > worked properly.
> > > > > > > > > > Now I installed the v1 with the perl installer but I have 
> > > > > > > > > > some problems.
> > > > > > > > > > I found in the wiki:
> > > > > > > > > > " Note the LS and the MA cannot share a tomcat installation."
> > > > > > > > > > What does it mean?
> > > > > > > > > > That I need 2 tomcat running or 2 tomcat instances?
> > > > > > > > > >         
> > > > > > > > > Yup. Unfortunately, that is the case with perfSONAR 1.0. We 
> > > > > > > > > plan to have this fixed with perfSONAR 1.1.
> > > > > > > > >
> > > > > > > > >  
> > > > > > > > > > In both cases could you give me some suggestions on how to do 
> > > > > > > > > > it?
> > > > > > > > > >         
> > > > > > > > > If you want to install both the services on the same machine, 
> > > > > > > > > you will currently need to install two instances of tomcat. 
> > > > > > > > > Please note that you will need to change the port numbers on 
> > > > > > > > > at least one instance of tomcat as tomcat's configuration by 
> > > > > > > > > default uses 8080 for listening to http request.
> > > > > > > > >
> > > > > > > > > Changing the port numbers is easy. On the second instance of 
> > > > > > > > > tomcat (or both, if you want to run them on a port different 
> > > > > > > > > from 8080), look for the following port numbers and change them.
> > > > > > > > >
> > > > > > > > > 8005 - tomcat shutdown port
> > > > > > > > > 8080 - tomcat listener port
> > > > > > > > > 8009 - tomcat ajp listener (you can simply comment out this 
> > > > > > > > > line. tomcat works fine without it).
> > > > > > > > >
> > > > > > > > > I have attached a presentation that Roman wrote and used for 
> > > > > > > > > Lab session for SEEREN2. Have a look at slide 8. It might help 
> > > > > > > > > you. Please make sure that you restart tomcat after you make 
> > > > > > > > > changes to server.xml.
> > > > > > > > >
> > > > > > > > > Once you have installed two instances, run the pS 1.0 
> > > > > > > > > installation script. When you are asked for tomcat locations, 
> > > > > > > > > provide separate locations for RRD MA and separate location of 
> > > > > > > > > LS. This should then work.
> > > > > > > > >
> > > > > > > > >  
> > > > > > > > > > Which is the differences between the snapshot version an the 
> > > > > > > > > > other one?
> > > > > > > > > >         
> > > > > > > > > Snapshot contains improvements which will be available in the 
> > > > > > > > > next release. Snapshot is suggested for early adopters of 
> > > > > > > > > improved pS software and for users of software (services such 
> > > > > > > > > as SQL MA) which are currently not available in the official 
> > > > > > > > > release.
> > > > > > > > >
> > > > > > > > >  
> > > > > > > > > > Which version have you installed?
> > > > > > > > > >         
> > > > > > > > > Believe it or not, I am struggling to install perfSONAR 1.0 on 
> > > > > > > > > a solaris machine. We delivered a perfSONAR Lab session to 
> > > > > > > > > SEEREN2 partners recently and while preparing for that lab, I 
> > > > > > > > > must have successfully installed 1.0 around 20 times :)
> > > > > > > > >
> > > > > > > > > pS 1.0 is the official version and I strongly recommend that 
> > > > > > > > > you install the official version.
> > > > > > > > >
> > > > > > > > > If you have more questions, you can contact me via IM 
> > > > > > > > > () or via skype (loukik_k)
> > > > > > > > >
> > > > > > > > > Loukik.
> > > > > > > > >  
> > > > > > > > > > Thank in advance,
> > > > > > > > > > Giovanni
> > > > > > > > > >
> > > > > > > > > >         
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >   


--
Giovanni Cesaroni

..............................................
CONSORTIUM GARR
The Italian Academic and Research Network

Network Operation Center
Tel.  06 4336 1488/52
Fax   06 4336 1444
E-mail 

..............................................