Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] EXT: Re: Adding other Organizations Personar boxes to my Grid.

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] EXT: Re: Adding other Organizations Personar boxes to my Grid.


Chronological Thread 
  • From: Edward Colone <>
  • To: "Thomas, Philip" <>
  • Cc: "" <>
  • Subject: Re: [perfsonar-user] EXT: Re: Adding other Organizations Personar boxes to my Grid.
  • Date: Tue, 26 Oct 2021 12:24:51 -0400

I believe that should work, yes.

I think archiving is done on a per-task basis, so the results should only be sent to archivers defined in the particular task.

Thanks,

-Ed


On Tue, Oct 26, 2021 at 12:21 PM Thomas, Philip <> wrote:

Thank you for the response

 

So I would simply have the admin,

Run  psconfig remote add --configure-archives https://192.148.241.9/psconfig/final.json

 

And do the normal stuff on my mesh, like adding any other box.

 

If the remote box has other has other archives, they will simply stack

When you run psconfig remote list on the endpoint.

 

Thanks again for you advise and input.

 

 

From: Edward Colone <>
Date: Tuesday, October 26, 2021 at 9:40 AM
To: Thomas, Philip <>
Cc: <>
Subject: EXT: Re: [perfsonar-user] Adding other Organizations Personar boxes to my Grid.

This would be a two step process:

 

First, you would have to have the remote perfSONAR boxes ingest the test mesh/schedule.  Usually an admin logs on to the node and performs a psconfig command to tell the testpoint/toolkit the location of the schedule.

 

Second, you would tell your Archiver that the remote machines are permitted to send data to the archive.  Adding the remote nodes by IP Address would probably be the easiest way.

 

Please let me know if you have any other questions.

 

Thanks,

 

-Ed

 

 

On Tue, Oct 26, 2021 at 9:37 AM Thomas, Philip <> wrote:

I have been building deploying personar boxes and using the mdash to construct a grid.

I would like to add other non KSU to my monitoring grid.

For example I would like to add the Perfsonar box that Ohio Super Computer Center has to my grid.

 

Is that possible?

I assuming the testing would be one directional, since I don’t have access to that Iperf, to add my publisher config to that box.

 

 

 

Philip Thomas

-Network Design Architect (KSU)

-CS Phd. Student Kent State University

-EMBA

-JNCIA Certification

-Adjunct Professor

College of Computer Science

Kent State University 

 

 

 

 

 

 

 

 

 

--
To unsubscribe from this list: https://lists.internet2.edu/sympa/signoff/perfsonar-user

CAUTION: EXTERNAL SENDER Do not click any links, open any attachments, or REPLY to the message unless you trust the sender and know the content is safe.

--
To unsubscribe from this list: https://lists.internet2.edu/sympa/signoff/perfsonar-user



Archive powered by MHonArc 2.6.24.

Top of Page