perfSONAR User Q&A and Other Discussion

[Roberto Carna <>]

Dear Valentin, thanks for your response.

I have added TCP/443 from my perfsonar server to Internet (outgoing
rule), but I still can't see any data in the web interface.

Or do I have to open TCP/443 as INCOMING part too ???

Regrads !!!
El mié., 5 sept. 2018 a las 13:27, Valentin Vidic
(<>)
 escribió:
>
> On Wed, Sep 05, 2018 at 12:48:00PM -0300, Roberto Carna wrote:
> > Only OUTGOING rules, not incoming rules:
> >
> > FROM:
> > my_perfsonar_server
> >
> > TO:
> > Internet
> >
> > PORTS and PROTOCOLS:
> > TCP/861 (owampd)
> > TCP/862 (twampd)
> > UDP/33434-33634 (traceroute)
> > TCP/5001 (iperf)
> > TCP/5201 (iperf3)
> > TCP/5000,5101 (nuttcp)
> > TCP/8760-9960 (owamp test)
> > UDP/8760-9960 (owamp test)
> > TCP/18760-19960 (twamp test)
> > UDP/18760-19960 (twamp test)
> > ICMP
> >
> > I've selected two test servers from Internet:
> >
> > nettest.lbl.gov
> > sacr-pt1.es.net
> >
> > and I have one interface for throughput tests and other interface por
> > latency tests, both in the same network segment with ARP parameters
> > defined in this sense.
> >
> > But the test results are empty on the web interface.
> >
> > Please can you help me ? I want to display the test results in order
> > to analyze the tool.
>
> You might also need 443/TCP for pscheduler.  Also try running some
> pscheduler tests from the command line to check if that part works.
>
> --
> Valentin Vidic
> Computer Systems Engineer - Expert
> Department of Computer Infrastructure and Services
> Croatian Academic and Research Network - CARNET
> Josipa Marohnica 5, HR-10000 Zagreb, Croatia
> tel: +385 1 6661 714, fax. +385 1 6661 635
> gsm: +385 91 2480 919
> www.CARNet.hr