Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] Re: Perfsonar Device issue

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] Re: Perfsonar Device issue


Chronological Thread 
  • From: Andrew Lake <>
  • To: "" <>, "Garnizov, Ivan (RRZE)" <>, Andreas Demetriou <>
  • Subject: Re: [perfsonar-user] Re: Perfsonar Device issue
  • Date: Fri, 2 Sep 2016 09:05:10 -0400

Hi Andreas,

Try running the following to see if regular_testing is happy again (do not forget the * at the end of that second command):

/etc/init.d/perfsonar-regulartesting stop
pkill -9 -f regulartesting
rm -rf /var/lib/perfsonar/regulartesting/*
/etc/init.d/perfsonar-regulartesting start

Thanks,
Andy


On September 2, 2016 at 9:01:46 AM, Andreas Demetriou () wrote:

Hi,

Heres a screenshot from the log.


Regards,

Andreas Demetriou| Placement Network Engineer
 Gigaclear plc
Gigaclear plc, Windrush Court, Abingdon, Oxfordshire, OX14 1SY
M: 07976649731 T: 01865591142 W: www.gigaclear.com
Gigaclear plc is registered in England and Wales with company number 07476617



From: Garnizov, Ivan (RRZE) <>
Sent: 02 September 2016 13:22:04
To: Andreas Demetriou;
Subject: RE: Perfsonar Device issue
 

Hello Andreas,

 

Generally it is not normal to have the regulartesting service at 99%. Well this depends on multiple factors like number of tests scheduled, server resources (CPU, disk) and alike.

 

Nevertheless it is harmless to restart the service (service perfsonar-regulartesting restart) and see how it behaves. Also please send us the /var/log/perfsonar/regulartesting.log

 

Regards,

Ivan Garnizov

 

GEANT SA1T2: pS deployments GN Operations

GEANT SA2T3: pS development team

GEANT SA3T5: eduPERT team

 

From: [mailto:] On Behalf Of Andreas Demetriou
Sent: Freitag, 2. September 2016 12:58
To:
Subject: [perfsonar-user] Perfsonar Device issue

 

Hi,

 

I have perfsonar device participating in a central measurement archive and using the Maddash. The network went down yesterday and the device lost access to the MA, but when the network came back up other devices within the network are working fine but this one is not either updating the MA or not performing test properly. As when I run the “top” command I can see one regular testing running at 99%, is this normal?

 

Many thanks,

Andreas




Archive powered by MHonArc 2.6.19.

Top of Page