perfsonar-user - [perfsonar-user] Perfsonar Device issue

Subject: perfSONAR User Q&A and Other Discussion

List archive

[perfsonar-user] Perfsonar Device issue

From: Andreas Demetriou <>
To: "" <>
Subject: [perfsonar-user] Perfsonar Device issue
Date: Fri, 2 Sep 2016 10:58:11 +0000
Accept-language: en-GB, en-US
Authentication-results: spf=none (sender IP is ) ;
Ironport-phdr: 9a23:jSqT9BE+l/c0Hei6/TGZwJ1GYnF86YWxBRYc798ds5kLTJ75pM2wAkXT6L1XgUPTWs2DsrQf1LqQ7vurADFIyK3CmU5BWaQEbwUCh8QSkl5oK+++Imq/EsTXaTcnFt9JTl5v8iLzG0FUHMHjew+a+SXqvnZBUin4YEBtK/77AYnUht7yyvu/4bXSZRlFnjywfek0IRmr502FrsQMj5BlLK8rjwbSr2FgeuJKyHluKE7J2Rvw+5Hj0oRk9nF5vf47+sdbGYn3eqkkV71fEXxyOmY5/sDirl/PQA6C+mEdVXg+nRtHCgPB4RjgGJD3tyrxrO1m3yeGe8bxSOZnCnyZ8653RUqw2288PDkj/TSPhw==
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99

Hi,

I have perfsonar device participating in a central measurement archive and using the Maddash. The network went down yesterday and the device lost access to the MA, but when the network came back up other devices within the network are working fine but this one is not either updating the MA or not performing test properly. As when I run the “top” command I can see one regular testing running at 99%, is this normal?

Many thanks,

Andreas

[perfsonar-user] Perfsonar Device issue, Andreas Demetriou, 09/02/2016
- Re: [perfsonar-user] Perfsonar Device issue, Antoine Delvaux, 09/02/2016
- [perfsonar-user] RE: Perfsonar Device issue, Garnizov, Ivan (RRZE), 09/02/2016
  - [perfsonar-user] Re: Perfsonar Device issue, Andreas Demetriou, 09/02/2016
    - Re: [perfsonar-user] Re: Perfsonar Device issue, Andrew Lake, 09/02/2016
      - Re: [perfsonar-user] Re: Perfsonar Device issue, Andreas Demetriou, 09/02/2016

List archive

[perfsonar-user] Perfsonar Device issue