perfSONAR User Q&A and Other Discussion

[Xu Chen <>]

Their MTU size is also 9000.

On Sep 24, 2015, at 2:35 PM, Brian Jones <> wrote:

You may want to check the testing end point sides mtu size.

fwiw

--
Brian

On Thu, Sep 24, 2015 at 2:26 PM, Xu Chen <> wrote:

Hello all,

I use 10G NIC on my perfSONAR node. When I start a tcp throughput test from my node to another node, the throughput is 1.2 Gbps (before I use 10G NIC, it’s 911Mbps). After I reserve the the source and destination, the result becomes 0.4 Gbps. I use default TCP window size and MTU is 1500.  What do I miss on the configuration (perfSONAR toolkit or NIC)?

Another problem is when I change MTU from 1500 to 9000 (ifconfig eth0 mtu 9000 up), I met the following problem when starting a test.

bwctl: Using tool: iperf

bwctl: 26 seconds until test results available

RECEIVER START

------------------------------------------------------------

Server listening on TCP port 5191

Binding to local address 140.221.68.2

TCP window size: 87380 Byte (default)

------------------------------------------------------------

[ 15] local 140.221.68.2 port 5191 connected with 129.63.79.200 port 47521

Waiting for server threads to complete. Interrupt again to force quit.

bwctl: local tool did not complete in allocated time frame and was killed

What should I do so that I can use jumbo frame?

Thanks,

Chen Xu