perfSONAR User Q&A and Other Discussion

["Andrew Lake" <>]

Hi,

Hmm can you run ps auxw | grep 10.10.12.2 and send thr results? I am curious what the BWCTL commands your regular test is running look like. It’s quite possible there is another option triggering the error.

Thanks,

Andy

On Thu, Aug 13, 2015 at 1:32 PM, Humberto Galiza <> wrote:

--------
WARNING: At least one of the links in the message below goes to an IP address (e.g.10.1.1.1), which could be malicious. To learn how to protect yourself, please go here: https://commons.lbl.gov/x/_591B
--------

Hi Andrew,

Thanks for replying. I've run the command you suggested, and I've got:

bwctl -T iperf3 -t 20 -i 1 -s 10.10.14.2 -c 10.10.12.2
bwctl: Using tool: iperf3
bwctl: 114 seconds until test results available

SENDER START
Connecting to host 10.10.12.2, port 5650
[ 15] local 10.10.14.2 port 41821 connected to 10.10.12.2 port 5650
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[ 15]   0.00-1.00   sec   182 KBytes  1.49 Mbits/sec    0   59.4 KBytes
[ 15]   1.00-2.00   sec  1.05 MBytes  8.80 Mbits/sec    0    331 KBytes
[ 15]   2.00-3.00   sec  5.20 MBytes  43.6 Mbits/sec    0   1.44 MBytes
[ 15]   3.00-4.00   sec  18.8 MBytes   157 Mbits/sec    0   5.56 MBytes
[ 15]   4.00-5.00   sec  78.8 MBytes   661 Mbits/sec   99   23.2 MBytes
[ 15]   5.00-6.00   sec  61.2 MBytes   514 Mbits/sec  3167   12.1 MBytes
[ 15]   6.00-7.00   sec  62.5 MBytes   524 Mbits/sec    0   12.1 MBytes
[ 15]   7.00-8.00   sec  56.2 MBytes   472 Mbits/sec    0   12.1 MBytes
[ 15]   8.00-9.00   sec  52.5 MBytes   440 Mbits/sec    0   12.2 MBytes
[ 15]   9.00-10.00  sec  57.5 MBytes   482 Mbits/sec    0   12.4 MBytes
[ 15]  10.00-11.00  sec  53.8 MBytes   451 Mbits/sec    0   12.6 MBytes
[ 15]  11.00-12.00  sec  58.8 MBytes   493 Mbits/sec    0   13.0 MBytes
[ 15]  12.00-13.00  sec  57.5 MBytes   482 Mbits/sec    0   13.4 MBytes
[ 15]  13.00-14.00  sec  62.5 MBytes   524 Mbits/sec    0   13.9 MBytes
[ 15]  14.00-15.00  sec  61.2 MBytes   514 Mbits/sec    0   14.4 MBytes
[ 15]  15.00-16.00  sec  66.2 MBytes   556 Mbits/sec    0   15.1 MBytes
[ 15]  16.00-17.00  sec  68.8 MBytes   577 Mbits/sec    0   15.9 MBytes
[ 15]  17.00-18.00  sec  71.2 MBytes   598 Mbits/sec    0   16.7 MBytes
[ 15]  18.00-19.00  sec  77.5 MBytes   650 Mbits/sec    0   17.7 MBytes
[ 15]  19.00-20.00  sec  78.8 MBytes   661 Mbits/sec    0   18.7 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[ 15]   0.00-20.00  sec  1.03 GBytes   440 Mbits/sec  3266             sender
[ 15]   0.00-20.00  sec  1022 MBytes   429 Mbits/sec                  receiver

iperf Done.

SENDER END

Thanks,

---

De: "Andrew Lake" <>
Para: "galiza" <>
Cc:
Enviadas: Quinta-feira, 13 de agosto de 2015 13:12:03
Assunto: Re: [perfsonar-user] Strange errors visualizing BWCTL graphs from Maddash

Hi,

Both the graphs on the MaDDash instance and your local instance look the same and both have red dots:

http://190.103.186.5/maddash-webui/details.cgi?uri=/maddash/grids/ONOS+AmLight+Testbed+-+UDP+BWCTL+Test+Between+ONOS+Bandwidth+Hosts/10.10.14.2/10.10.12.2/Throughput

https://190.103.184.147/serviceTest/graphWidget.cgi?source=10.10.14.2&dest=10.10.12.2&url="http%3A%2F%2Flocalhost%2Fesmond%2Fperfsonar%2Farchive%2F

Looks like around last Thursday (Aug 6th) iperf3 started reporting some malformed results in one direction. You might try running “bwctl -T iperf3 -t 20 -i 1 -s 10.10.14.2 -c 10.10.12.2” and see what you get. 

Hope that helps,

Andy

On Thu, Aug 13, 2015 at 11:25 AM, Humberto Galiza <> wrote:

--------
WARNING: At least one of the links in the message below goes to an IP address (e.g. 10.1.1.1), which could be malicious. To learn how to protect yourself, please go here: https://commons.lbl.gov/x/_591B
--------

Greetings,

I'm experiencing problems to visualize the measurements on an experimental pS and Maddash deployment.

I see some red circles at some points of the graph timeline, and when I click on it I got the following error:

"Error from bwctl/iperf3: Problem parsing output: malformed number (no digits after initial minus), at character offset 8661 (before "nan\t\t\t\t}\t\t\t}]...") at /opt/perfsonar_ps/regular_testing/bin/../lib/perfSONAR_PS/RegularTesting/Parsers/Iperf3.pm line 54."

The graph can be accessed via:
http://190.103.186.5/maddash-webui/details.cgi?uri=/maddash/grids/ONOS+AmLight+Testbed+-+UDP+BWCTL+Test+Between+ONOS+Bandwidth+Hosts/10.10.14.2/10.10.12.2/Throughput

I think that it's not a measurement problem because I can see the BWCTL test graph directly on the source host (https://190.103.184.147/serviceTest/psGraph.cgi). However, as I mentioned before, I'm stuck with this error when I try to visualize the results on Maddash.

Does anybody can throw some light on what is causing these errors and what can I do to solve it?

Thanks in advance.

--
Humberto Galiza ..::.. NEG AmLight
DAERO - Diretoria Adjunta de Engenharia de Redes e Operações
RNP – Rede Nacional de Ensino e Pesquisa
E-mail: /
Tel.:+55 (19) 3787-3367 / +1 (786) 288-3367
Cel.:+55 (19) 971-445-570
Skype:humbertogaliza

--

Humberto Galiza ..::.. AmLight - Americas Lightpaths
E-mail:
P:+1 (786) 288-3367
M:+55 (19) 971-445-570
Skype:humbertogaliza