Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] Strange errors visualizing BWCTL graphs from Maddash

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] Strange errors visualizing BWCTL graphs from Maddash


Chronological Thread 
  • From: "Andrew Lake" <>
  • To: "Humberto Galiza" <>
  • Cc:
  • Subject: Re: [perfsonar-user] Strange errors visualizing BWCTL graphs from Maddash
  • Date: Thu, 13 Aug 2015 09:12:03 -0700 (PDT)

Hi,

Both the graphs on the MaDDash instance and your local instance look the same and both have red dots:

http://190.103.186.5/maddash-webui/details.cgi?uri=/maddash/grids/ONOS+AmLight+Testbed+-+UDP+BWCTL+Test+Between+ONOS+Bandwidth+Hosts/10.10.14.2/10.10.12.2/Throughput

https://190.103.184.147/serviceTest/graphWidget.cgi?source=10.10.14.2&dest=10.10.12.2&url="http%3A%2F%2Flocalhost%2Fesmond%2Fperfsonar%2Farchive%2F

Looks like around last Thursday (Aug 6th) iperf3 started reporting some malformed results in one direction. You might try running “bwctl -T iperf3 -t 20 -i 1 -s 10.10.14.2 -c 10.10.12.2” and see what you get. 

Hope that helps,
Andy




On Thu, Aug 13, 2015 at 11:25 AM, Humberto Galiza <> wrote:

--------
WARNING: At least one of the links in the message below goes to an IP address (e.g. 10.1.1.1), which could be malicious. To learn how to protect yourself, please go here: https://commons.lbl.gov/x/_591B
--------

Greetings,

I'm experiencing problems to visualize the measurements on an experimental pS and Maddash deployment.

I see some red circles at some points of the graph timeline, and when I click on it I got the following error:

"Error from bwctl/iperf3: Problem parsing output: malformed number (no digits after initial minus), at character offset 8661 (before "nan\t\t\t\t}\t\t\t}]...") at /opt/perfsonar_ps/regular_testing/bin/../lib/perfSONAR_PS/RegularTesting/Parsers/Iperf3.pm line 54."

The graph can be accessed via:
http://190.103.186.5/maddash-webui/details.cgi?uri=/maddash/grids/ONOS+AmLight+Testbed+-+UDP+BWCTL+Test+Between+ONOS+Bandwidth+Hosts/10.10.14.2/10.10.12.2/Throughput

I think that it's not a measurement problem because I can see the BWCTL test graph directly on the source host (https://190.103.184.147/serviceTest/psGraph.cgi). However, as I mentioned before, I'm stuck with this error when I try to visualize the results on Maddash.

Does anybody can throw some light on what is causing these errors and what can I do to solve it?

Thanks in advance.

--
Humberto Galiza ..::.. NEG AmLight
DAERO - Diretoria Adjunta de Engenharia de Redes e Operações
RNP – Rede Nacional de Ensino e Pesquisa
E-mail: /
Tel.:+55 (19) 3787-3367 / +1 (786) 288-3367
Cel.:+55 (19) 971-445-570
Skype:humbertogaliza





Archive powered by MHonArc 2.6.16.

Top of Page