perfSONAR User Q&A and Other Discussion

[Frederic LOUI <>]

Hi Nina,

Hope you're doing well.
The RRD-MA 2.0 RC1 web services we have installed here should be OK.
( RRD data collection from our side has been also resumed ;-)   )

Meanwhile, could you please remove RENATER-test entry from the MA.conf ?
And replace the old official RENATER entry by this one ? (Which is the 
2.0RC1 that enters "production"  status)
The official one should be: perfsonar.renater.fr

==> TO BE REPLACED 
;RENATER,http://supervision-ipv6.renater.fr:8080/axis/services/MeasurementArchiveService,NMWG2v2_netutil,"",utilization,utilization
RENATER,http://perfsonar.renater.fr:8080/perfSONAR-RRD-MA-2.0/services/MeasurementArchiveService,http://schemas.perfsonar.net/2.0,"",http://ggf.org/ns/nmwg/characteristic/utilization/2.0,http://ggf.org/ns/nmwg/characteristic/utilization/2.0

==> TO BE REMOVED 
;RENATER-test,http://193.49.159.5:8080/perfSONAR-RRD-MA-2.0/services/MeasurementArchiveService,http://schemas.perfsonar.net/2.0,"",http://ggf.org/ns/nmwg/characteristic/utilization/2.0,http://ggf.org/ns/nmwg/characteristic/utilization/2.0


I also noticed the possibility to use other MA.conf file in the 
resources dialog box.
Thank for that ! I won't bother you if I need additional test with an 
other MA !
Some discrepancies are still present, but we are working from our side 
to correct and polish the results.

I don't know if you have much RRD-MA2.0RC1 in production (baby-sitting 
phase :-) ),
but feel free to :

Use our MA as a testing "feed" for PerfSONARUI
contact me should you notice any issues or errors from our side.

The goal is to perform as much as test with different domain, so some 
issues/bugs might appear ...
(Not on PerfSONARUI but also in RRD-MA or even RRD-DATA collection)

These errors can be collected and analyzed, part of a FAQ or known issue 
related to the whole chain.

Also you can activate the RENATER RRD-MA by default. This service should 
be always up.

Thanks in advance
Bgrds/Frederic

--
Frederic LOUI / GIP RENATER

Service de Suivi Operationnel / Metrologie & QoS
Network Operations Service / Metrology & QoS

Tel: +33 1 53 94 20 40 / Fax: +33 1 53 94 20 31
 http://www.renater.fr