Skip to Content.
Sympa Menu

ndt-users - Re: perfSonar Toolkit with NDT 3.7.0-8.el6.

Subject: ndt-users list created

List archive

Re: perfSonar Toolkit with NDT 3.7.0-8.el6.


Chronological Thread 
  • From: Arne Berglund <>
  • To: Aaron Brown <>
  • Cc:
  • Subject: Re: perfSonar Toolkit with NDT 3.7.0-8.el6.
  • Date: Mon, 04 May 2015 11:28:35 -0700

That did indeed address the issue, Aaron. Everything starts properly after a reboot now.

- Arne

On 2015-05-04 11:20, Aaron Brown wrote:

Hey Larry/Arne,
 
Could you download https://github.com/ndt-project/ndt/raw/3.7/conf/ndt-init and copy it over /etc/init.d/ndt (make sure it's still executable after doing so). That should hopefully fix this issue.
 
Cheers,
Aaron
 
On May 4, 2015, at 2:03 PM, Arne Berglund <> wrote:
I saw the same thing - fakewww did not restart as part of the update. I too had to manually start it. Not that I consider that a serious problem, I typically restart such things after updates anyway, just for this type of issue.

---
Arne Berglund
System Administrator, Internet Services
Lane Education Service District
Eugene, OR
____________



On 2015-05-04 10:54, Larry Blunk wrote:
There's nothing in fakewww_error.log at the time
of the update.   Here's what I see in /var/log/messages
at the time of the yum update.  It looks like the
web100srv process was restarted, but not fakewww.
May  2 03:55:32 perfsonar yum[31877]: Updated: ndt-server-3.7.0-8.el6.x86_64
May  2 03:55:32 perfsonar web100srv: Web100srv (ver 3.7.0) process started
May  2 03:55:32 perfsonar yum[31877]: Updated: ndt-client-3.7.0-8.el6.x86_64
May  2 03:55:33 perfsonar yum[31877]: Updated: ndt-3.7.0-8.el6.x86_64
-Larry
On 05/04/2015 01:34 PM, Aaron Brown wrote:
Hey Larry,
Can you send /var/log/ndt/fakewww_error.log?
Cheers,
Aaron
On May 4, 2015, at 1:11 PM, Larry Blunk <> wrote:
 The NDT server was also not running on our server after
the update.  When I looked at the processes, the fakewww
process was not running.  I just did a "service ndt restart"
to restart it.
-Larry Blunk
On 05/04/2015 08:50 AM, Aaron Brown wrote:
Hi,
Can you send the output of "ps auxw"?
Cheers,
Aaron
On May 2, 2015, at 11:12 AM, Schweinberg, Michael R <> wrote:
I have two perfSonar servers running, that updated to NDT 3.7.0-8.el6. When I tried to run the NDT test today the website did not display the webpage, so I went to the perfSonar GUI and it shows the NDT service as not running, but the test is enabled, how do I get the NDT service back to the running state? See the attached screenshots for more information.
Thanks,
Thomas Holtzman
Data Communications Specialist - Associate
Information Services Division
Network Operations Center
3600 Forbes Ave at Meyran
Pittsburgh PA, 15213
<>
[Description: cid:]
This email may contain confidential information of the sending organization. Any unauthorized or improper disclosure, copying, distribution, or use of the contents of this email and attached document(s) is prohibited. The information contained in this email and attached document(s) is intended only for the personal and confidential use of the recipient(s) named above. If you have received this communication in error, please notify the sender immediately by email and delete the original email and attached document(s).
[cid:323C837B-7C12-496A-9F3F-4B54067ADB45]
[cid:096A16C6-8D49-4FB0-8288-BC20122AF20F]
<image001.jpg><Services Offered.PNG><NDT Enabled Services.PNG>



Archive powered by MHonArc 2.6.16.

Top of Page