ndt-users list created

Hello,

I've just finished installing ndt-3.5.0 on a fresh SuSE 11.1 System (incl. 
alle prerequisits; patch for kernel 2.6.27, web100_userland-1.7). Server runs 
fine and I do get bandwith results.

However, the web100srv produces an error which fails to compelte the test 
successfully. This is the output from -ddd:
ANL/Internet2 NDT ver 3.5.0
        Variables file = /usr/local/ndt/web100_variables
        log file = /usr/local/ndt/web100srv.log
        Debug level set to 1
server ready on port 3001
web100_init() read 69 variables from file
Starting test suite:
 > Middlebox test
 > Simple firewall test
 > C2S throughput test
 > S2C throughput test
 <-- Middlebox test -->
  -- port: 3003
Sending 1456 Byte packets over the network
Signal 17 received by process 22352
 <-------------------->
 <-- Simple firewall test -->
  -- port: 42133
  -- time: 1
  -- oport: 2571
 <-------------------------->
 <-- C2S throughput test -->
  -- port: 3002
listening for Inet connection on testOptions->c2ssockfd, fd=3
Sending 'GO' signal, to tell client to head for the next test
Opening network interface 'eth2' for packet-pair timing
installing pkt filter for 'host 10.110.109.104 and port 2574'
Initial pkt src data = 8068484
New packet trace started -- initializing counters
365314 kbps outbound
Signal USR1(10) sent to child [22355]
Signal 10 received by process 22355
03:16:15.649224   03:16:15.649224   128 bytes read '  0 0 84 694 7815 18212 
77975 16876 70005 144937 1 1558 232.14 0 0 0 1 0' from monitor pipe
128 bytes read '  1 0 0 99 558 1644 45429 40869 16975 3745 1 1 274.82 86 14 
109221 0 0' from monitor pipe
 <------------------------->
 <-- S2C throughput test -->
  -- port: 3003
waiting for data on testOptions->s2csockfd
Signal 11 received by process 22355
Signal 17 received by process 22352
Opening network interface 'eth2' for packet-pair timing
installing pkt filter for 'host 10.110.109.104 and port 2580'
Initial pkt src data = 8068484
Signal 17 received by process 22352
New packet trace started -- initializing counters
sent 716955648 bytes to client in 10.00 seconds
Buffer control counters Total = 87519, new data = 0, Draining Queue = 0
Signal USR2(12) sent to child [22357]
Signal 12 received by process 22357
03:16:26.019890   03:16:26.019890   Read '  0 0 1 1 5 6 9612 1476 1235 1247 0 
4235 454.46 0 0 0 1 0' from monitor pipe
Read '  0 0 0 3 1179 9323 46700 9154 13887 148207 4687 19061 273.91 10056 
242043 102 0 4687' from monitor pipe
573470 kbps inbound
libweb100: warning: accessing depricated variable AckPktsIn
libweb100: warning: accessing depricated variable AckPktsOut
Variable 13 (CwndRestores) not found in KIS
Variable 22 (MaxCaCwnd) not found in KIS
Variable 30 (MaxSaCwnd) not found in KIS
Variable 13 (CwndRestores) not found in KIS
Variable 22 (MaxCaCwnd) not found in KIS
Variable 30 (MaxSaCwnd) not found in KIS
Signal 11 received by process 22357
Signal 17 received by process 22352
Protocol error!
S2C throughput test FAILED!
Client --> Server data detects link = 10 Gigabit Enet
Client <-- Server Ack's detect link = OC-12
Server --> Client data detects link = OC-12
Server <-- Client Ack's detect link = 10 Gigabit Enet

If I'm not mistaking, the 2 lines:
>>
libweb100: warning: accessing depricated variable AckPktsIn
libweb100: warning: accessing depricated variable AckPktsOut
>>
probably are the source of the problem.

any ideas what i might have missed?

thanks and best regards
Christoph