ndt-users list created

[Bill Abbott <>]

Won't let me use 90 ms and 150 Mbps, the DBP is too large for the 
server.  It passes at lower values, but they're too far from the actual 
conditions.  Can you adjust that?

Bill

Jeremy Schafer wrote:
> Have you tried this URL?
> http://ndt-nbp.rutgers.edu:8200/ServerData/pdb-a-linux-3.rutgers.edu:2008-03-07-20:09:59.html 
>
>
>
> Bill Abbott wrote:
> > I ran diag-client against this url from the server, here's the output:
> >
> > # ./diag-client ndt-nbp.rutgers.edu 8100 90 150
> > Using: rtt 90 ms and rate 150
> > Connected.
> > Control connection established.
> > port = 8003
> > Starting test.
> > peakwin=1688029 minpackets=3 maxpackets=1027 stepsize=256
> > Target run length is 2771751 packets (or a loss rate of 0.00003608%)
> > Requested DBP exceeds 1048576
> > Test 1a (5 seconds): Coarse Scan
> > Test 1b (5 seconds): ...
> > report url ServerData/pdb-a-linux-3.rutgers.edu:2008-03-07-20:09:59.html
> >
> >
> > I can't seem to get the page via browser, though, either the default 
> > page or the url above.