Skip to Content.
Sympa Menu

ndt-users - Re: gigabit slower than fast-e

Subject: ndt-users list created

List archive

Re: gigabit slower than fast-e


Chronological Thread 
  • From: Bill Abbott <>
  • To: Jeremy Schafer <>
  • Cc: Peter Van Epp <>,
  • Subject: Re: gigabit slower than fast-e
  • Date: Fri, 07 Mar 2008 15:15:41 -0500

I ran diag-client against this url from the server, here's the output:

# ./diag-client ndt-nbp.rutgers.edu 8100 90 150
Using: rtt 90 ms and rate 150
Connected.
Control connection established.
port = 8003
Starting test.
peakwin=1688029 minpackets=3 maxpackets=1027 stepsize=256
Target run length is 2771751 packets (or a loss rate of 0.00003608%)
Requested DBP exceeds 1048576
Test 1a (5 seconds): Coarse Scan
Test 1b (5 seconds): ...
report url ServerData/pdb-a-linux-3.rutgers.edu:2008-03-07-20:09:59.html


I can't seem to get the page via browser, though, either the default page or the url above.


Jeremy Schafer wrote:
Bill,

I brought up a local NPAD server on ndt-nbp. You can get to it by sending your web browser to:

http://ndt-nbp.rutgers.edu:8100

Let me know, what else I can do.


Bill Abbott wrote:
Yes, window scaling is on, server and client are "7". The connection is network limited most of the time, rather than sender or receiver limited.

At one point in the distant past we got ~140 Mbps, now it's 10-15.




Archive powered by MHonArc 2.6.16.

Top of Page