Skip to Content.
Sympa Menu

ndt-dev - Re: [ndt-dev] ndt 3.7.0 -rc1 testing

Subject: NDT-DEV email list created

List archive

Re: [ndt-dev] ndt 3.7.0 -rc1 testing


Chronological Thread 
  • From: Aaron Brown <>
  • To: Peter Boothe <>
  • Cc: "<>" <>
  • Subject: Re: [ndt-dev] ndt 3.7.0 -rc1 testing
  • Date: Tue, 27 Jan 2015 18:52:42 +0000
  • Accept-language: en-US
  • Authentication-results: google.com; dkim=none (message not signed) header.d=none;google.com; dmarc=none action=none header.from=internet2.edu;
Excellent, thanks for the report Peter.

Cheers,
Aaron

On Jan 27, 2015, at 11:50 AM, Peter Boothe <> wrote:

I can only compile the server on the same system I have been writing websockets and unit tests (different one from the Ubuntu one I mentioned earlier).

The tarball compiles and the server runs just fine on that system and also passes all the "make check" tests. (Linux w/ 2.6 kernel and web100 patches).

  -Peter

On Tue, Jan 27, 2015 at 10:37 AM, Aaron Brown <> wrote:
Hey Peter,

Thanks for the update. Does the server work when compiled?

Cheers,
Aaron

On Jan 26, 2015, at 10:19 AM, Peter Boothe <> wrote:

The tarball configured fine and then make worked, but it did not make web100clt.  I cd'd into src and then web100clt made correctly and was able to run an NDT test to ndt.iupui.mlab1.lga01.measurement-lab.org and the resulting data looked correct.

  -Peter

On Thu, Jan 22, 2015 at 3:36 PM, Aaron Brown <> wrote:
Hey Folks,

I’ve updated the NDT RPMs/tarball. You can grab them at http://ndb1.internet2.edu/~aaron/ndt-3.7.0-2.el6.x86_64/

This should fix the mxmlc error that Peter encountered, along with the issue that prevented the applet from working with 1.8. Would folks be able to test these out?

It’d be good if we could get the tarball, x86-64 and i386 RPMs tested, using both flash and java clients on OS X, Windows and Linux, if possible. It doesn’t need to be in depth testing, just make sure that there’s nothing anything obviously wrong with the configuration when you run some tests.

Cheers,
Aaron

On Jan 9, 2015, at 12:15 PM, Aaron Brown <> wrote:

Hey Folks,

I’ve merged in the RPM changes from Issue 162, fixed a couple issues and rebuilt the precompiled flash and java clients. The tarball and RPMs from trunk can be gotten at http://ndb1.internet2.edu/~aaron/ndt-3.7.0-1.el6.x86_64/ . Could folks test both, and make sure they work? My scant testing of the x86-64 RPM seemed to work.

Cheers,
Aaron




--
Peter Boothe | Software Engineer |  | +1 650-889-0879 (corp cell)




--
Peter Boothe | Software Engineer |  | +1 650-889-0879 (corp cell)


Archive powered by MHonArc 2.6.16.

Top of Page