All things related to multicast

["Tantsura, Jeff" <>]

Thanks very much for your suggestion!!!

Jeff

--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: Marshall Eubanks 
[mailto:]
 
Sent: 02 December 2005 13:45
To: Tantsura, Jeff
Cc: 
;
 
''
Subject: Re: [j-nsp] Interdomain MSDP session from non RP

This should work.

What I  would recommend however is setting up anycast RP mesh using  
internal MSDP, then
any one of the RP mesh can be an eMSDP peer - for example, one at the
border.

Regards
Marshall

On Dec 2, 2005, at 4:29 AM, Tantsura, Jeff wrote:

> Hi,
>
> In ALL interdomain multicast docs you could see that interdomain MSDP
> session are always setup between RP's in both domains.
> I have also found that it is recommended to do it this way.
> It sounds logic if RP is close to the border but why would you  
> setup it this
> way if RP is many hops away,
> in my opinion a border router or RR which runs eMBGP would run  
> eMSDP just
> fine, as long as it has iMSDP session with RP.
>
> Any suggestion would be highly appreciated,
>
> Thanks,
> Jeff
>
> _______________________________________________
> juniper-nsp mailing list 
> 
> http://puck.nether.net/mailman/listinfo/juniper-nsp