Skip to Content.
Sympa Menu

perfsonar-user - RE:[perfsonar-user]

Subject: perfSONAR User Q&A and Other Discussion

List archive

RE:[perfsonar-user]


Chronological Thread 
  • From: Andrew Lake <>
  • To: Mark Feit <>, stanley <>
  • Cc: "" <>
  • Subject: RE:[perfsonar-user]
  • Date: Fri, 23 Jun 2023 07:44:57 -0700

Hi,

For the RPMs, try again after running a “yum clean all” command. It’s possible whatever mirror your host was hitting had not synced yet. All the RPMs should be there, so shouldn’t get any messages about missing packages anymore.

Also, you are correct, the (host) portion of the URL should be the IP address of your VM. If your VM IP is 10.1.1.1 then you should use http://10.1.1.1

Andy


On June 22, 2023 at 1:54:39 PM, stanley () wrote:

Also,

 

I just wanted to make sure that I am understanding the directions. It says for us too type “htttps://(host) into our browser, this means the ip of the machine that we are using to install this on? FYI we are using a virtual machine with cent7 installed.

 

 

This is the step that we are on:

 

 

Sent from Mail for Windows

 

From:
Sent: Thursday, June 22, 2023 1:09 PM
To: ;
Cc:
Subject: Re:[perfsonar-user]

 

Hi,

 

Do a “yum clean all” and try again. A package did not upload correctly and we added it back earlier today.

 

Thanks,

Andy

 

 

On June 22, 2023 at 12:27:20 PM, Stanley Gilliam () wrote:

Hello,

 

Thanks for your help with this. We’ve built a new vm that runs on the appropriate OS, but when we run the install all is fine except for the toolkit packages. They don’t seem to want to install, and insight into what packages we may need to get this installed. We are trying to access the administrative interface through the web browser.

 

root@perfsonar bruhenry]# yum install epel-release 

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

 * base: mirror.datto.com

 * extras: mirrors.mit.edu

 * updates: bay.uchicago.edu

base                                                                                                                                                                                   | 3.6 kB  00:00:00

extras                                                                                                                                                                                 | 2.9 kB  00:00:00

updates                                                                                                                                                                                | 2.9 kB  00:00:00

Resolving Dependencies

--> Running transaction check

---> Package epel-release.noarch 0:7-11 will be installed

--> Finished Dependency Resolution

 

Dependencies Resolved

 

==============================================================================================================================================================================================================

 Package                                               Arch                                            Version                                          Repository                                       Size

==============================================================================================================================================================================================================

Installing:

 epel-release                                          noarch                                          7-11                                             extras                                           15 k

 

Transaction Summary

==============================================================================================================================================================================================================

Install  1 Package

 

Total download size: 15 k

Installed size: 24 k

Is this ok [y/d/N]: y

Downloading packages:

epel-release-7-11.noarch.rpm                                                                                                                                                           |  15 kB  00:00:00

Running transaction check

Running transaction test

Transaction test succeeded

Running transaction

  Installing : epel-release-7-11.noarch                                                                                                                                                                   1/1

  Verifying  : epel-release-7-11.noarch                                                                                                                                                                   1/1

 

Installed:

  epel-release.noarch 0:7-11

 

Complete!

Loaded plugins: fastestmirror

perfsonar-repo-0.11-1.noarch.rpm                                                                                                                                                       | 5.2 kB  00:00:00

Examining /var/tmp/yum-root-MbAXeH/perfsonar-repo-0.11-1.noarch.rpm: perfsonar-repo-0.11-1.noarch

Marking /var/tmp/yum-root-MbAXeH/perfsonar-repo-0.11-1.noarch.rpm to be installed

Resolving Dependencies

--> Running transaction check

---> Package perfsonar-repo.noarch 0:0.11-1 will be installed

--> Finished Dependency Resolution

 

Dependencies Resolved

 

==============================================================================================================================================================================================================

 Package                                           Arch                                      Version                                   Repository                                                        Size

==============================================================================================================================================================================================================

Installing:

 perfsonar-repo                                    noarch                                    0.11-1                                    /perfsonar-repo-0.11-1.noarch                                    2.0 k

 

Transaction Summary

==============================================================================================================================================================================================================

Install  1 Package

 

Total size: 2.0 k

Installed size: 2.0 k

Is this ok [y/d/N]: y

Downloading packages:

Running transaction check

Running transaction test

Transaction test succeeded

Running transaction

  Installing : perfsonar-repo-0.11-1.noarch                                                                                                                                                               1/1

error: /etc/pki/rpm-gpg/RPM-GPG-KEY-perfSONAR-testing: import read failed(2).

  Verifying  : perfsonar-repo-0.11-1.noarch                                                                                                                                                               1/1

 

Installed:

  perfsonar-repo.noarch 0:0.11-1

 

Complete!

[root@perfsonar bruhenry]# yum clean all

Loaded plugins: fastestmirror

Cleaning repos: base epel extras perfSONAR updates

Cleaning up list of fastest mirrors

[root@perfsonar bruhenry]# yum install perfsonar-toolkit

Loaded plugins: fastestmirror

Determining fastest mirrors

epel/x86_64/metalink                                                                                                                                                                   |  27 kB  00:00:00

 * extras: mirrors.mit.edu

 * perfSONAR: software.internet2.edu

 * updates: mirror.umd.edu

base                                                                                                                                                                                   | 3.6 kB  00:00:00

epel                                                                                                                                                                                   | 4.7 kB  00:00:00

extras                                                                                                                                                                                 | 2.9 kB  00:00:00

perfSONAR                                                                                                                                                                              | 3.0 kB  00:00:00

updates                                                                                                                                                                                | 2.9 kB  00:00:00

(1/8): epel/x86_64/group_gz                                                                                                                                                            |  99 kB  00:00:00

(2/8): base/7/x86_64/group_gz                                                                                                                                                          | 153 kB  00:00:00

(3/8): epel/x86_64/updateinfo                                                                                                                                                          | 1.0 MB  00:00:00

(4/8): extras/7/x86_64/primary_db                                                                                                                                                      | 249 kB  00:00:00

(5/8): base/7/x86_64/primary_db                                                                                                                                                        | 6.1 MB  00:00:00

(6/8): perfSONAR/primary_db                                                                                                                                                            | 224 kB  00:00:00

(7/8): updates/7/x86_64/primary_db                                                                                                                                                     |  21 MB  00:00:00

(8/8): epel/x86_64/primary_db                                                                                                                                                          | 7.0 MB  00:00:04

Resolving Dependencies

--> Running transaction check

---> Package perfsonar-toolkit.noarch 0:5.0.3-1.el7 will be installed

--> Processing Dependency: perfsonar-common for package: perfsonar-toolkit-systemenv-5.0.3-1.el7.noarch 

--> Finished Dependency Resolution

Error: Package: perfsonar-toolkit-library-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-servicewatcher-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-ntp-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-logstash-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-toolkit-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-sls-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-archive-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-psconfig-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-sysctl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-core

Error: Package: libperfsonar-esmond-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-pscheduler-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: libperfsonar-regulartesting-perl-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-systemenv-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-elmond-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

Error: Package: perfsonar-toolkit-security-5.0.3-1.el7.noarch (perfSONAR)

           Requires: perfsonar-common

 You could try using --skip-broken to work around the problem

 You could try running: rpm -Va --nofiles --nodigest

 

On Tue, Jun 13, 2023 at 2:58 PM Mark Feit <> wrote:

stanley writes:

 

Is this where I would go for issues with the install process. We are getting the curl (56) message.

 

This is as good a place as any.

 

[root@aeplglobus01 bruhenry]# yum install http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm
Updating Subscription Management repositories.
Red Hat Enterprise Linux 8 for x86_64 - BaseOS (RPMs)                                                                                                                          66 kB/s | 2.4 kB     00:00

[MIRROR] perfsonar-repo-0.11-1.noarch.rpm: Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]

I’m able to pull the package from that URL without problem and am not seeing signs that the host serving it up is having problems.  If you’re able to rule out anything like proxies or other security appliances between that host and ours, drop me a line off-list and I’ll see what I can do to help troubleshoot it.

Also of note:  You appear to be attempting to install on Red Hat Enterprise Linux 8.  We do not have production support EL8 in any form as of right now (beta should be out soon).  RHEL will probably work, but it’s not on the officially-supported list.  (See https://www.perfsonar.net/post-2021-08-05-os-support.html for more information.)

--Mark

 

 


[MIRROR] perfsonar-repo-0.11-1.noarch.rpm: Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]
[MIRROR] perfsonar-repo-0.11-1.noarch.rpm: Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]
[MIRROR] perfsonar-repo-0.11-1.noarch.rpm: Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]
[FAILED] perfsonar-repo-0.11-1.noarch.rpm: Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]
Curl error (56): Failure when receiving data from the peer for http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfsonar-repo-0.11-1.noarch.rpm [Recv failure: Connection reset by peer]
[root@aeplglobus01 bruhenry]# yum install
Updating Subscription Management repositories.
usage: yum install [-c [config file]] [-q] [-v] [--version]
                   [--installroot [path]] [--nodocs] [--noplugins]
                   [--enableplugin [plugin]] [--disableplugin [plugin]]
                   [--releasever RELEASEVER] [--setopt SETOPTS]
                   [--skip-broken] [-h] [--allowerasing] [-b | --nobest] [-C]
                   [-R [minutes]] [-d [debug level]] [--debugsolver]
                   [--showduplicates] [-e ERRORLEVEL] [--obsoletes]
                   [--rpmverbosity [debug level name]] [-y] [--assumeno]
                   [--enablerepo [repo]] [--disablerepo [repo] | --repo
                   [repo]] [--enable | --disable] [-x [package]]
                   [--disableexcludes [repo]] [--repofrompath [repo,path]]
                   [--noautoremove] [--nogpgcheck] [--color COLOR] [--refresh]
                   [-4] [-6] [--destdir DESTDIR] [--downloadonly]
                   [--comment COMMENT] [--bugfix] [--enhancement]
                   [--newpackage] [--security] [--advisory ADVISORY]
                   [--bz BUGZILLA] [--cve CVES]
                   [--sec-severity {Critical,Important,Moderate,Low}]
                   [--forcearch ARCH]
                   PACKAGE [PACKAGE ...]
yum install: error: the following arguments are required: PACKAGE
[root@aeplglobus01 bruhenry]#

 

 

--

Stanley B Gilliam Jr 6785487768

--
To unsubscribe from this list: https://lists.internet2.edu/sympa/signoff/perfsonar-user

 




Archive powered by MHonArc 2.6.24.

Top of Page