Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] PerfSONAR set-up in a private network

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] PerfSONAR set-up in a private network


Chronological Thread 
    < Chronological >      < Thread >
  • From: Johann Hugo <>
  • To: Mark Feit <>
  • Cc: "" <>
  • Subject: Re: [perfsonar-user] PerfSONAR set-up in a private network
  • Date: Thu, 15 Jun 2023 14:45:39 +0200
That's good to hear. 

I'm also planning to clone the disk image of a working testpoint (RaspBerry-PI 4) and use it for all the other testpoints. Besides the hostname + ip address, is there anything unique from the perfSONAR install that must be fixed? What about /var/lib/perfsonar/psconfig/client_uuid ?

Regards
Johann

On Thu, Jun 15, 2023 at 1:06 PM Mark Feit <> wrote:

Johann Hugo writes:

 

I need to set-up a perfSONAR network (30x testpoints, archiver, MadDash etc) on a private 10.x.x.x network with static IP addresses. 

 

- What are the gotchas I need to look out for ?

- Any pointers to documentation that can help me with this ?

 

There’s nothing special to be done for that since perfSONAR doesn’t know or care that it’s on private addresses.  As long as they can all reach each other, everything should be fine.  Follow the installation instructions as usual.

 

--Mark

 

 


Archive powered by MHonArc 2.6.24.

Top of Page