perfSONAR User Q&A and Other Discussion

[Tadeja Saje <>]

Hi,

The results two measuring points(throughput tests) are presented on the 
maddash dashboard.

Bu the current status in "unknown".
 Description under reports():
mp-ijs-pf1.arnes.si
Unable to run and/or query any incoming throughput tests.
Category:CONFIGURATION
Potential Solutions:

    Verify your host and router firewalls are allowing TCP port 443 and 
TCP/UDP port 5201
    Verify the limits defined in /etc/pscheduler/limits.conf are 
properly defined and not being exceeded by the tests



Measurement in the opposite direction between testpoints:
result is shown, current status is OK,
description under reports:

mp-ijs-pf1.arnes.si
Unable to run and/or query any incoming throughput tests.
Category:CONFIGURATION
Potential Solutions:

    Verify your host and router firewalls are allowing TCP port 443 and 
TCP/UDP port 5201
    Verify the limits defined in /etc/pscheduler/limits.conf are 
properly defined and not being exceeded by the tests

Best regards,
Tadeja

Attachment: maddash- throughput-reverse.png
Description: PNG image

Attachment: maddash throughput.jpg
Description: JPEG image