Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3


Chronological Thread 
  • From: Szymon Trocha <>
  • To: Tom Yard <>
  • Cc:
  • Subject: Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3
  • Date: Tue, 18 Sep 2018 21:50:02 +0200
  • Ironport-phdr: 9a23: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
  • Organization: PCSS

Hi Tom,

W dniu 18.09.2018 o 21:08, Tom Yard pisze:
Dear Szimon, the "pscheduler troubleshoot hostname" give a normal function on both servers.

I have start manually the iperf3 service in the target server:

# iperf3 -s


 
But in the web interface from server that runs tests to the other, latency and loss tests are OK but throughput test has not any data and I can see this error:

-> [throughput] TCP iperf3 returned an error: error - unable to connect to server: Connection refused [iperf3]
-> [throughput] UDP iperf3 returned an error: error - unable to connect to server: Connection refused [iperf3]

From the perfSONAR server that run a task I can see the following log:

Sep 18 12:03:07 PSR01 runner INFO     67206: With iperf3: throughput --duration PT20S --source 172.31.18.26 --ip-version 4 --dest 172.31.18.22 --source-node 172.31.18.26 --dest-node 172.31.18.22 --single-ended

I missed it earlier - Is there a particular reason you configured "--single-ended" option in the test? Single-ended testing is used for testing to iperf hosts that are not running pscheduler. I'm assuming both your hosts are running pScheduler so no need to enable it in the Toolkit GUI test configuration.

Normally iperf and iperf3 are started and stopped on demand via pScheduler, not run as persistent daemons.

Regards,

--
Szymon Trocha
Poznań Supercomputing & Networking Center
General NOC phone +48 61-858-2015 | noc.pcss.pl
Personal desk phone +48 61-858-2022
Wysłaliśmy do Ciebie ten e-mail w odpowiedzi na Twoje zapytanie lub w związku z oferowaną usługą. Przesłanie korespondencji do Centrum Zarządzania PCSS lub zgłoszenie telefoniczne jest równoznaczne z wyrażeniem zgody na przetwarzanie danych osobowych przez Instytut Chemii Bioorganicznej Polskiej Akademii Nauk w Poznaniu adres: ul. Z. Noskowskiego 12/14, 61-704 Poznań. Szczegółowe informacje znajdują się w naszej Polityce prywatności. | This message has been sent as a part of communication with PSNC NOC or your service request sent to us. For more information read our Privacy Policy.



Archive powered by MHonArc 2.6.19.

Top of Page