Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3


Chronological Thread 
  • From: Szymon Trocha <>
  • To: Tom Yard <>,
  • Subject: Re: [perfsonar-user] pScheduler doesn't launch iperf neither iperf3
  • Date: Tue, 18 Sep 2018 20:13:40 +0200
  • Ironport-phdr: 9a23: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
  • Organization: PCSS

Hi Tom,

W dniu 18.09.2018 o 18:00, Tom Yard pisze:
Dear people, I put two perfSONAR servers in the same network segment, in order to test the tool.

Both servers are clones and have the following features:

- Their own web interface
- All the services running ok (esmond, lsregistration, oamp, pscheduler, psconfig, twamp)
- firewalld service is stopped (iptables), so there are no any firewall rule at all between servers
- iperf3 enabled from /etc/pscheduler/tool/iperf3/iperf3.conf
[iperf3]
iperf3_cmd = /usr/bin/iperf3
server_port = 5201

These are defaults. You don't have to enable/uncomment it.

 
But in the web interface from server that runs tests to the other, latency and loss tests are OK but throughput test has not any data and I can see this error:

-> [throughput] TCP iperf3 returned an error: error - unable to connect to server: Connection refused [iperf3]
-> [throughput] UDP iperf3 returned an error: error - unable to connect to server: Connection refused [iperf3]

From the perfSONAR server that run a task I can see the following log:

Sep 18 12:03:07 PSR01 runner INFO     67206: With iperf3: throughput --duration PT20S --source 172.31.18.26 --ip-version 4 --dest 172.31.18.22 --source-node 172.31.18.26 --dest-node 172.31.18.22 --single-ended

What is a result of "pscheduler troubleshoot hostname" where hostname is the name of a remote pScheduler host?

Regards,

--
Szymon Trocha
Poznań Supercomputing & Networking Center
General NOC phone +48 61-858-2015 | noc.pcss.pl
Personal desk phone +48 61-858-2022
Wysłaliśmy do Ciebie ten e-mail w odpowiedzi na Twoje zapytanie lub w związku z oferowaną usługą. Przesłanie korespondencji do Centrum Zarządzania PCSS lub zgłoszenie telefoniczne jest równoznaczne z wyrażeniem zgody na przetwarzanie danych osobowych przez Instytut Chemii Bioorganicznej Polskiej Akademii Nauk w Poznaniu adres: ul. Z. Noskowskiego 12/14, 61-704 Poznań. Szczegółowe informacje znajdują się w naszej Polityce prywatności. | This message has been sent as a part of communication with PSNC NOC or your service request sent to us. For more information read our Privacy Policy.



Archive powered by MHonArc 2.6.19.

Top of Page