perfSONAR User Q&A and Other Discussion

[Andrew Lake <>]

Hi,

There is no generate_gui_configuration command anymore, it was removed a few releases ago. Instead run “/etc/init.d/perfsonar-meshconfig-guiagent restart”. 

Also note that perfsonar-meshconfig-guiagent will be replaced with a newer and better documented system in our next release, due out in about a week (look for more emails on the release schedule in the next day or so).

Thanks,

Andy

On August 7, 2018 at 11:40:00 AM, Jeffy Merin Jacob () wrote:

Hi 

I did do "yum install perfsonar-meshconfig-guiagent".

But it still doesnt install generate_gui_configuration package

I found someone who had a similar issue. But I'm not very clear as to what his solution was.

https://www.reddit.com/r/networking/comments/8b3js9/perfsonar_maddash_config_issues/

Thanks

Jeffy

On Mon, Aug 6, 2018 at 12:31 AM, Garnizov, Ivan (RRZE) <> wrote:

Hi Jeffy,

 

Please excuse me for the delay here. I had been off this day. By all means, please, always include the perfsonar-user list in your inquiries to get timely responses.

 

If "generate_gui_configuration"  is nowhere to be found on your system, then you might miss the package and the installation step: http://software.es.net/maddash/mesh_config.html#installing-the-package

 

Please check the steps after the installation to be able to further automate the process of configuration updates.

 

Regards,

Ivan Garnizov

 

GEANT SA1T2: pS deployments GN Operations

GEANT SA2T3: pS development team

GEANT SA3T5: eduPERT team

 

Jubiläumsjahr 2018 - IT in Bewegung

Das RRZE - der IT-Dienstleister der FAU

www.50-jahre.rrze.fau.de

 

Von: Jeffy Merin Jacob [mailto:]
Gesendet: Donnerstag, 2. August 2018 20:08
An: Garnizov, Ivan (RRZE) <>
Betreff: Re: [perfsonar-user] Maddash Configuration

 

Hi 

Thanks for your reply.

I dont have have "generate_gui_configuration" in my /usr/lib/perfsonar/bin/ directory.I only have the following :

• build_json
• perfsonar_meshconfig_guiagent
• validate_json
• lookup_hosts
• validate_configuration

So I did guiagent stop and start instead. But I dont see maddash.yaml populated with anything.

Is "generate_gui_configuration" present elsewhere when i do it  in Ubuntu 16.04?

 

 

Thanks 

Jeffy

 

 

 

 

On Thu, Aug 2, 2018 at 2:29 AM, Garnizov, Ivan (RRZE) <> wrote:

Hello Jeffy,

 

The official documentation for the configuration of the MaDDash service from a mesh configuration file is here: http://software.es.net/maddash/mesh_config.html

Please note the 4^th step.

 

In order to be sure the configuration had been successfully parsed, please check the “the maddash.yaml file”. It should be populated with configuration based on your mesh.

If there are problems please review and report back the events from /var/log/perfsonar/ folder, meshconfig-guiagent.log and meshconfig-agent.log files (if the statements are not clear)

 

As a final step: Please also restart the maddash service = sudo service maddash-server restart

 

 

Regards,

Ivan Garnizov

 

GEANT SA1T2: pS deployments GN Operations

GEANT SA2T3: pS development team

GEANT SA3T5: eduPERT team

 

Jubiläumsjahr 2018 - IT in Bewegung

Das RRZE - der IT-Dienstleister der FAU

www.50-jahre.rrze.fau.de

 

Von: [mailto:] Im Auftrag von Jeffy Merin Jacob
Gesendet: Donnerstag, 2. August 2018 01:05
An:
Betreff: [perfsonar-user] Maddash Configuration

 

Hi

I just started using MaDDash:Monitoring Dashboard. I'm trying to deploy it on my Ubuntu 16. 04 desktop.

I started following this tutorial [ https://learn.nsrc.org/perfsonar/install-maddash-mesh-configuration ] that installs MaDDash and the mesh configuration.

They start of by creating a simple conf file and they used "perfsonar-meshconfig-jsonbuilder" to convert it into json format and stored it in a place where it can be accessed by all the hosts.Mine is similar to the one found here: http://docs.perfsonar.net/multi_mesh_server_config.html

Next they installed maddash and did some modifications to the maddash.yaml file . Mine is as follows:
                   database: /var/lib/maddash/
                    serverHost: "localhost"
                   http:
                           port: 8881
Finally they installed "perfsonar-meshconfig-guiagent" and made modifications to meshconfig-guiagent.conf file to make it point to the json file. The only line modified was the following:  

<mesh>                 

configuration_url             https://localhost/Dashboard.json

</mesh>

When I restart maddash, I get the following error in "maddash-server.netlogger.log":

 

The tutorial teaches me how to do it CentOS, but since I'm implementing it in Ubuntu I'm not sure where I'm going wrong.

Any help would be appreciated

Thanks

Jeffy

 

 

--

1 John 4:7-8  Beloved, let us love one another, for love is from God, and whoever loves has been born of God and knows God.  Anyone who does not love does not know God, because God is love.

--

1 John 4:7-8  Beloved, let us love one another, for love is from God, and whoever loves has been born of God and knows God.  Anyone who does not love does not know God, because God is love.