Skip to Content.
Sympa Menu

perfsonar-user - [perfsonar-user] OWAMP not running without Throughput

Subject: perfSONAR User Q&A and Other Discussion

List archive

[perfsonar-user] OWAMP not running without Throughput


Chronological Thread 
  • From: Jason Chia <>
  • To:
  • Subject: [perfsonar-user] OWAMP not running without Throughput
  • Date: Wed, 18 Apr 2018 01:44:49 +0000 (UTC)
  • Ironport-phdr: 9a23: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
Hi all,

Just reinstalled perfsonar toolkit with the latest download and have OWAMP
setup on both ends of several switches based on "Suggested Approachs for Local
Testing" https://www.perfsonar.net/deploy/node-placement/local-deployments/

perfSONAR /toolkit version 4.0.2.3-1.el7.centos
owamp running version 3.5.6-1.el7.centos

These nodes (laptops; with 8GB memory and at least 4 cores - single CPU) also
only have a single NIC.

Problem i have is that no result is showing.
Test on both node enabled - checked
Set to default parameters - checked
Test with owping via CLI - getting result; checked
owamp services on GUI showing running - checked

I had throughput test added on a single node and it looks like that made it
work. Is it a requirement to have Throughput test added and running to get
OWAMP results to show / run?

Thanks in advance.

Regards,
Jason Chia

Archive powered by MHonArc 2.6.19.

Top of Page