Skip to Content.
Sympa Menu

perfsonar-user - Re: ***SPAM*** [perfsonar-user] running tests but no results are displayed

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: ***SPAM*** [perfsonar-user] running tests but no results are displayed


Chronological Thread 
  • From: Szymon Trocha <>
  • To:
  • Cc:
  • Subject: Re: ***SPAM*** [perfsonar-user] running tests but no results are displayed
  • Date: Mon, 22 Jan 2018 10:24:18 +0100
  • Ironport-phdr: 9a23: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
  • Organization: PCSS

W dniu 19.01.2018 o 22:44,

pisze:
I am new to perfsonar and we got a request to install it on our end.
I followed the installation guide from perfsonar,net and installed it with the
following services running:
bwctl
esmond
lsregistration
meshconfig-agent
owamp pscheduler

I randomly selected a node from the global directory and configured a BW
troughput between us to run every hour.
its been a few days now but I don't see any results.
What am I doing wrong? I pinged the remote node and pings/traceroutes are
successful so I am reachable.
Anyone know what I'm missing?

my node is dynamic8.nas.nasa.gov


Hi ,

Did you maybe try to run some pscheduler tests from CLI towards these remote hosts?

This may be a firewall issue (if you pick up some host randomly from service directory there is no guarantee it's publicly available).

I also tried to run some tests towards your side but not all of them succeed so again this may be fw issue:

[psudouser@cowania2 ~]$ pscheduler task rtt --dest 198.9.7.8
Submitting task...
Task URL:
https://cowania2.man.poznan.pl/pscheduler/tasks/24e64909-bf9f-45ac-9f90-354f6c473ea6
Running with tool 'ping'
Fetching first run...

Next scheduled run:
https://cowania2.man.poznan.pl/pscheduler/tasks/24e64909-bf9f-45ac-9f90-354f6c473ea6/runs/33c8a493-585e-436d-b424-69c02a7a27a8
Starts 2018-01-22T09:16:03Z (~7 seconds)
Ends   2018-01-22T09:16:14Z (~10 seconds)
Waiting for result...

1       dynamic8.nas.nasa.gov (198.9.7.8)  64 Bytes  TTL 47  RTT 175.0000 ms
2       dynamic8.nas.nasa.gov (198.9.7.8)  64 Bytes  TTL 47  RTT 175.0000 ms
3       dynamic8.nas.nasa.gov (198.9.7.8)  64 Bytes  TTL 47  RTT 175.0000 ms
4       dynamic8.nas.nasa.gov (198.9.7.8)  64 Bytes  TTL 47  RTT 175.0000 ms
5       dynamic8.nas.nasa.gov (198.9.7.8)  64 Bytes  TTL 47  RTT 175.0000 ms

0% Packet Loss  RTT Min/Mean/Max/StdDev = 175.465000/175.556000/175.645000/0.379000 ms

No further runs scheduled.

[psudouser@cowania2 ~]$ pscheduler task throughput --dest 198.9.7.8
Submitting task...
Unable to determine the lead participant: Can't find pScheduler or BWCTL on 198.9.7.8
[psudouser@cowania2 ~]$

Regards,

--
Szymon Trocha

Poznań Supercomputing & Networking Center
Tel. +48 618582022 ::: http://noc.pcss.pl




Archive powered by MHonArc 2.6.19.

Top of Page