perfsonar-user - [perfsonar-user] no graphs for throughput test results, they don't appear to be stored

Subject: perfSONAR User Q&A and Other Discussion

List archive

[perfsonar-user] no graphs for throughput test results, they don't appear to be stored

From: Rajan Patel <>
To:
Subject: [perfsonar-user] no graphs for throughput test results, they don't appear to be stored
Date: Thu, 16 Feb 2017 12:04:48 -0500
Ironport-phdr: 9a23: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

I have 1 IP at Hurricane Electric running on 4.34.58.11 which I can manually run a web100clt test against, to test my throughput.

I want perfSonar to test throughput on a schedule, and see those results in graph form.

I have a test scheduled for 1 time every 5 minutes, the test lasts 20 seconds. Throughput tests will be running 23% of the time.

Throughput and Loss do not seem to be recorded. I only see Graphs for Ping.

I have attached screenshots and logs.

About my setup:

Yesterday evening I installed perfSonar 3.4.2 32bit and turned on my desired services, and set the necessary scheduled tests. Auto updates were left to ON.

This morning I checked "Test Results" and saw Ping was being tracked. I rebooted perfSonar, after the updates happened thinking this was necessary for the throughput test to get logged correctly. No luck.

Any help would be appreciated!

Thanks,

Rajan

Attachment: Screen Shot 2017-02-16 at 11.55.00 AM.png
Description: PNG image

Attachment: Screen Shot 2017-02-16 at 11.54.40 AM.png
Description: PNG image

Attachment: Screen Shot 2017-02-16 at 11.54.21 AM.png
Description: PNG image

Attachment: Screen Shot 2017-02-16 at 11.54.02 AM.png
Description: PNG image

Attachment: service_watcher.log
Description: Binary data

Attachment: regular_testing.log
Description: Binary data

Attachment: psb_to_esmond.log
Description: Binary data

Attachment: owamp_bwctl.log
Description: Binary data

Attachment: mesh_configuration_agent.log
Description: Binary data

Attachment: lsregistrationdaemon.log
Description: Binary data

Attachment: lscachedaemon.log
Description: Binary data

Attachment: ls_registration_daemon.log.1
Description: Binary data

Attachment: ls_registration_daemon.log
Description: Binary data

Attachment: ls_cache_daemon.log.1
Description: Binary data

Attachment: ls_cache_daemon.log
Description: Binary data

Attachment: configdaemon.log
Description: Binary data

Attachment: config_daemon.log
Description: Binary data

Attachment: clean_esmond_db.log
Description: Binary data

[perfsonar-user] no graphs for throughput test results, they don't appear to be stored, Rajan Patel, 02/16/2017
- Re: [perfsonar-user] no graphs for throughput test results, they don't appear to be stored, Dan Doyle, 02/16/2017
  - Re: [perfsonar-user] no graphs for throughput test results, they don't appear to be stored, Rajan Patel, 02/16/2017

List archive

[perfsonar-user] no graphs for throughput test results, they don't appear to be stored