Skip to Content.
Sympa Menu

perfsonar-user - [perfsonar-user] Re: Node not performing Test Correctly

Subject: perfSONAR User Q&A and Other Discussion

List archive

[perfsonar-user] Re: Node not performing Test Correctly


Chronological Thread 
  • From: Andreas Demetriou <>
  • To: "Garnizov, Ivan (RRZE)" <>, "" <>
  • Subject: [perfsonar-user] Re: Node not performing Test Correctly
  • Date: Tue, 20 Sep 2016 09:52:29 +0000
  • Accept-language: en-GB, en-US
  • Authentication-results: spf=none (sender IP is ) ;
  • Ironport-phdr: 9a23:P7k15RPZffK3WfVpKhol6mtUPXoX/o7sNwtQ0KIMzox0KPTyrarrMEGX3/hxlliBBdydsK0UzbeN+Pm9EUU7or+/81k6OKRWUBEEjchE1ycBO+WiTXPBEfjxciYhF95DXlI2t1uyMExSBdqsLwaK+i76xXcoFx7+LQt4IPjuUs6X1pzvlrP6x5qGKSpBnjy8c7RsaF2XswzX/oksu7lPa+x5nhrXq30OdO1Mw2J6Iky7kR/hoMu9qtoruTxdofw68MhJS+DnZKkiZb1eEDk8NW0pvovmuQSJBV+X62ESSWIQmwANHhPI9jn7WIv8qC33qrA71SWHa57YV7cxDB2k471mQQSgpCoCOiIj8WbKwph5iq5BrRu64RByxoPIeoCSKdJxf6zUdtcXTHAHVcFUAX8SSrigZpcCWrJSdd1TqJPw8h5X9UOz
  • Spamdiagnosticmetadata: NSPM
  • Spamdiagnosticoutput: 1:99

Hi,


Those commands where executed before and after the log entries. I have taken some screenshots of the owping from the FYF01 to another node on the network and it's fine when sending to that node but when receiving there is 100% packet loss and this is with every node on the network. 



And when doing an owping from a different host to the FYF01 the command never completes.

 

Even though i can ping the FYF01 node perfectly fine.



Many thanks,


Andreas Demetriou| Placement Network Engineer

 Gigaclear plc
Gigaclear plc, Windrush Court, Abingdon, Oxfordshire, OX14 1SY
M: 07976649731 T: 01865591142 W: www.gigaclear.com
Gigaclear plc is registered in England and Wales with company number 07476617

From: Garnizov, Ivan (RRZE) <>
Sent: 19 September 2016 13:02:03
To: Andreas Demetriou;
Subject: RE: Node not performing Test Correctly
 

Hi Andreas,

 

Please clarify, when were these commands executed?

Before the log entries in “Regular testing Log” or when you saw them or just now. You do not seem to have a regulartesting problem from today.

Please also make sure these test on FYF01 node are running just fine from the CLI.

Please also share the screen of the measurements with regards to the FYF01 node. Currently I see only the mesh status.

Where there previously measurements?

 

Regards,

Ivan

 

GEANT SA1T2: pS deployments GN Operations

GEANT SA2T3: pS development team

GEANT SA3T5: eduPERT team

 

 

From: [mailto:] On Behalf Of Andreas Demetriou
Sent: Montag, 19. September 2016 12:33
To:
Subject: [perfsonar-user] Node not performing Test Correctly

 

Hi,

 

I have an issue with the FYF01 node, it doesn’t seem to be correctly performing the tests. This node is running centos 6.8.

I have performed these commands:

sudo /etc/init.d/perfsonar-regulartesting stop

sudo pkill -9 -f regulartesting

sudo rm -rf /var/lib/perfsonar/regulartesting/*

sudo /etc/init.d/perfsonar-regulartesting start

 

 

 

Top (command)

 

 

Regular testing Log

 

 

Many Thanks,

 

Andreas


Archive powered by MHonArc 2.6.19.

Top of Page