perfSONAR User Q&A and Other Discussion

["Uhl, George D. (GSFC-423.0)[SGT INC]" <>]

Hi Antoine,

After the upgrade I’m still getting the 405 error when my LivaX sends data
to the Central MA (using API key auth).  This was a problem with Centos
after the 3.5.1 release came out but was soon patched as 3.5.1-1.  It
doesn’t look like all the patches made it to the Debian/Ubuntu code
release or maybe something else is causing the problem.

-George

2016/03/15 13:50:44 (19106) ERROR> EsmondBase.pm:65
perfSONAR_PS::RegularTesting::MeasurementArchives::EsmondBase::__ANON__ -
Error writing data (405) 405 METHOD NOT ALLOWED
2016/03/15 13:50:44 (19106) ERROR> MeasurementArchiveChild.pm:209
perfSONAR_PS::RegularTesting::Master::MeasurementArchiveChild::handle_resul
ts - Problem storing results: Error writing data: 405 METHOD NOT ALLOWED
2016/03/15 13:50:44 (19106) ERROR> MeasurementArchiveChild.pm:125
perfSONAR_PS::RegularTesting::Master::MeasurementArchiveChild::__ANON__ -
Problem handling test results: Problem storing results: Error writing
data: 405 METHOD NOT ALLOWED at
/usr/share/perl5/perfSONAR_PS/RegularTesting/Master/MeasurementArchiveChild
.pm line 122.





On 3/15/16, 11:21 AM, 
"
 on behalf of
Uhl, George D. (GSFC-423.0)[SGT INC]"
<
 on behalf of 
>
wrote:

>Hi Antoine,
>
>I saw the email you sent earlier today after I sent my previous.  Per your
>instructions I’ve been able to successfully complete the upgrade.  I will
>check my Central MA later today to see if the database is getting updated
>with the LivaX test results.  One question I have is that it wasn’t just
>owamp data that wasn’t getting updated in the Central MA, but the
>bwctl/iperf test results were also not updating.  Will the 3.5.1-1 upgrade
>resolve both issues?
>
>Thanks!!
>-George
>
>
># apt-get upgrade
>Reading package lists... Done
>Building dependency tree
>Reading state information... Done
>The following packages have been kept back:
>  libperfsonar-perl libperfsonar-sls-perl linux-headers-generic-lts-trusty
>linux-image-generic-lts-trusty linux-signed-image-generic-lts-trusty
>perfsonar-lsregistrationdaemon
>  perfsonar-oppd-server perfsonar-oppd-shared perfsonar-regulartesting
>The following packages will be upgraded:
>  linux-generic-lts-trusty linux-libc-dev linux-signed-generic-lts-trusty
>owamp-client owamp-server
>5 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
>Need to get 470 kB/1,331 kB of archives.
>After this operation, 3,072 B of additional disk space will be used.
>Do you want to continue [Y/n]? Y
>Get:1 http://downloads.perfsonar.net/debian/ perfsonar-wheezy-3.5/main
>owamp-client amd64 3.5.0-2~bpo70+1 [283 kB]
>Get:2 http://downloads.perfsonar.net/debian/ perfsonar-wheezy-3.5/main
>owamp-server amd64 3.5.0-2~bpo70+1 [187 kB]
>Fetched 470 kB in 1s (245 kB/s)
>(Reading database ... 151275 files and directories currently installed.)
>Preparing to replace linux-generic-lts-trusty 3.13.0.79.71 (using
>.../linux-generic-lts-trusty_3.13.0.83.75_amd64.deb) ...
>Unpacking replacement linux-generic-lts-trusty ...
>Preparing to replace linux-libc-dev 3.2.0-99.139 (using
>.../linux-libc-dev_3.2.0-101.141_amd64.deb) ...
>Unpacking replacement linux-libc-dev ...
>Preparing to replace linux-signed-generic-lts-trusty 3.13.0.79.71 (using
>.../linux-signed-generic-lts-trusty_3.13.0.83.75_amd64.deb) ...
>Unpacking replacement linux-signed-generic-lts-trusty ...
>Preparing to replace owamp-client 3.5.0-1~bpo70+1 (using
>.../owamp-client_3.5.0-2~bpo70+1_amd64.deb) ...
>Unpacking replacement owamp-client ...
>Preparing to replace owamp-server 3.4.14-1 (using
>.../owamp-server_3.5.0-2~bpo70+1_amd64.deb) ...
> * Stopping OWAMP server owampd
>                  
>                                [ OK ]
>Moving obsolete conffile /etc/init.d/owampd out of the way...
>Unpacking replacement owamp-server ...
>dpkg: warning: unable to delete old directory '/etc/owampd': Directory not
>empty
>Processing triggers for man-db ...
>Processing triggers for ureadahead ...
>Setting up linux-generic-lts-trusty (3.13.0.83.75) ...
>Setting up linux-libc-dev (3.2.0-101.141) ...
>Setting up linux-signed-generic-lts-trusty (3.13.0.83.75) ...
>Setting up owamp-client (3.5.0-2~bpo70+1) ...
>Setting up owamp-server (3.5.0-2~bpo70+1) ...
>Removing obsolete conffile /etc/init.d/owampd ...
> * Starting OWAMP server owamp-server
>
>
>
>
>On 3/15/16, 11:06 AM, "Antoine Delvaux" 
><>
> wrote:
>
>>Hi George,
>>
>>Your problem seems to be specific to Ubuntu upgrades from 3.5 to 3.5.1.
>>
>>Have you seen my other message on the list?  Try to do an 'apt-get
>>update' and 'apt-get upgrade' again, we have released new packages
>>correcting these bugs, hopefully, this morning.
>>
>>Thanks,
>>
>>Antoine.
>>
>>> Le 15 mars 2016 à 13:57, Uhl, George D. (GSFC-423.0)[SGT INC]
>>><>
>>> a écrit :
>>> 
>>> Hi Andy,
>>> 
>>> I’m still trying to get both my LivaX hosts to successfully write data
>>>to
>>> the Central MA since the 3.5.1-1 code release.  I’m using Username/API
>>>key
>>> authentication. I’ve performed an ‘apt-get update’ and an ‘apt-get
>>> upgrade’ but the upgrade fails on the owamp-server and
>>> libperfsonar-sls-perl packages.  The tests are still running on the
>>>hosts
>>> and they are attempting to write the the Central MA on port 443, but
>>>the
>>> data never is recorded in the database.
>>> 
>>> Thanks,
>>> George
>>> 
>>> On 3/14/16, 9:51 AM, "Uhl, George D. (GSFC-423.0)[SGT INC]"
>>> <>
>>>  wrote:
>>> 
>>>> Hi Antoine,
>>>> 
>>>> Here is the output of the Œapt-get upgrade¹.  The output is much
>>>>shorter
>>>> this time since this upgrade only dealt with the previous failures.
>>>>Could
>>>> this failure be a result of running Ubuntu 12.04.5 vs 14.x?
>>>> 
>>>> Thanks,
>>>> George
>>>> 
>>>> 
>>>> # apt-get upgrade
>>>> Reading package lists... Done
>>>> Building dependency tree
>>>> Reading state information... Done
>>>> The following packages have been kept back:
>>>> libperfsonar-perl linux-headers-generic-lts-trusty
>>>> linux-image-generic-lts-trusty linux-signed-image-generic-lts-trusty
>>>> perfsonar-lsregistrationdaemon perfsonar-oppd-server
>>>>perfsonar-oppd-shared
>>>> perfsonar-regulartesting
>>>> The following packages will be upgraded:
>>>> libperfsonar-sls-perl owamp-server
>>>> 2 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.
>>>> 110 not fully installed or removed.
>>>> Need to get 0 B/210 kB of archives.
>>>> After this operation, 74.8 kB of additional disk space will be used.
>>>> Do you want to continue [Y/n]? Y
>>>> (Reading database ... 181396 files and directories currently
>>>>installed.)
>>>> Preparing to replace owamp-server 3.4.14-1 (using
>>>> .../owamp-server_3.5.0-1~bpo70+1_amd64.deb) ...
>>>> * Stopping OWAMP server owampd
>>>> 
>>>>                                        [ OK ]
>>>> update-rc.d: /etc/init.d/owampd exists during rc.d purge (use -f to
>>>>force)
>>>> dpkg: error processing
>>>> /var/cache/apt/archives/owamp-server_3.5.0-1~bpo70+1_amd64.deb
>>>>(--unpack):
>>>> subprocess new pre-installation script returned error exit status 1
>>>> Reinstalling /etc/owampd/owampd.conf that was moved away
>>>> Reinstalling /etc/owampd/owampd.limits that was moved away
>>>> * Starting OWAMP server owampd
>>>> 
>>>>                                        [ OK ]
>>>> Preparing to replace libperfsonar-sls-perl 3.5.0-1 (using
>>>> .../libperfsonar-sls-perl_3.5.1.1-1~bpo70+1_all.deb) ...
>>>> Unpacking replacement libperfsonar-sls-perl ...
>>>> dpkg: error processing
>>>> 
>>>>/var/cache/apt/archives/libperfsonar-sls-perl_3.5.1.1-1~bpo70+1_all.deb
>>>> (--unpack):
>>>> trying to overwrite
>>>> 
>>>>'/usr/share/perl5/perfSONAR_PS/Client/LS/PSQueryObjects/PSPersonQueryOb
>>>>j
>>>>ec
>>>> t
>>>> .pm', which is also in package libperfsonar-perl 3.5.0-1
>>>> Errors were encountered while processing:
>>>> /var/cache/apt/archives/owamp-server_3.5.0-1~bpo70+1_amd64.deb
>>>> 
>>>>/var/cache/apt/archives/libperfsonar-sls-perl_3.5.1.1-1~bpo70+1_all.deb
>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>> root@liva-ow1-1g:~#
>>>> 
>>>> 
>>>> 
>>>> On 3/14/16, 9:23 AM, "Antoine Delvaux" 
>>>> <>
>>>>  wrote:
>>>> 
>>>>> 
>>>>>> Le 14 mars 2016 à 13:11, Uhl, George D. (GSFC-423.0)[SGT INC]
>>>>>> <>
>>>>>>  a écrit :
>>>>>> 
>>>>>> Antoine,
>>>>>> 
>>>>>> I had done the 'apt-get update¹ previously but not an 'apt-get
>>>>>> upgrade¹.
>>>>>> I did both and during the upgrade process for both LivaX hosts I
>>>>>> received
>>>>>> the following error:
>>>>>> 
>>>>>> Rebuilding /usr/share/applications/bamf.index...
>>>>>> Processing triggers for gnome-menus ...
>>>>>> Processing triggers for hicolor-icon-theme ...
>>>>>> Processing triggers for libglib2.0-0 ...
>>>>>> Errors were encountered while processing:
>>>>>> /var/cache/apt/archives/owamp-server_3.5.0-1~bpo70+1_amd64.deb
>>>>>> 
>>>>>>/var/cache/apt/archives/libperfsonar-sls-perl_3.5.1.1-1~bpo70+1_all.d
>>>>>>e
>>>>>>b
>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>> 
>>>>> Do you have more output from this error?  This was probably included
>>>>>a
>>>>> bit before the final line, during the actual installation of those 2
>>>>> packages.
>>>>> 
>>>>> You can also run again the `apt-get upgrade` to see what happens, it
>>>>> shouldn't make things any worse.
>>>>> 
>>>>> Cheers,
>>>>> 
>>>>> Antoine.
>>>>> 
>>>> 
>>> 
>>
>