perfSONAR User Q&A and Other Discussion

[Sowmya Balasubramanian <>]

Hi Jeff,

Are you able to run a manual test between them?

Regards,

Sowmya

On Wed, Oct 28, 2015 at 1:47 PM, Jeff Creek <> wrote:

Downloaded pS-Toolkit-3.5-FullInstall-x86_64-2015Oct20 iso and installed it on
two VMs on the same VMware host.  Configured a ping test on each one pointing
to the other.  There are no results in the Test Results section.

NTP is in sync on each host.
Host 1:
 ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 nms-rlat.chic.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.hous.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.losa.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.newy32 .STEP.          16 u    - 1024    0    0.000    0.000   0.000
*chronos.es.net  .CDMA.           1 u   60   64  377   33.011   -1.132   2.468
+saturn.es.net   .CDMA.           1 u   58   64  377   53.836   -1.970   1.594

Host 2:
ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 nms-rlat.chic.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.hous.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.losa.n .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 nms-rlat.newy32 .STEP.          16 u    - 1024    0    0.000    0.000   0.000
*chronos.es.net  .CDMA.           1 u    9   64  377   33.085   -0.738   0.967
+saturn.es.net   .CDMA.           1 u   14   64  377   53.808   -0.850   0.764



No rules in iptables.  Both hosts:
 iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Output from host 1 owamp_bwctl.log:
...
Oct 28 16:42:31 localhost bwctld[3824]: FILE=sapi.c, LINE=353, Connection to
(192.168.201.127:4823) from (192.168.201.127:52418)
Oct 28 16:42:31 localhost bwctld[3824]: FILE=sapi.c, LINE=510,
ControlSession([192.168.201.127]:4823) accepted from
userid(nil):([192.168.201.127]:52418)
Oct 28 16:42:32 localhost bwctld[3825]: FILE=sapi.c, LINE=353, Connection to
(192.168.201.127:6095) from (192.168.201.128:35624)
Oct 28 16:42:32 localhost bwctld[3825]: FILE=sapi.c, LINE=510,
ControlSession([192.168.201.127]:6095) accepted from
userid(nil):([192.168.201.128]:35624)
Oct 28 16:42:34 localhost bwctld[3827]: FILE=sapi.c, LINE=353, Connection to
(192.168.201.127:4823) from (192.168.201.127:52420)
Oct 28 16:42:34 localhost bwctld[3827]: FILE=sapi.c, LINE=510,
ControlSession([192.168.201.127]:4823) accepted from
userid(nil):([192.168.201.127]:52420)
Oct 28 16:42:34 localhost bwctld[3828]: FILE=sapi.c, LINE=353, Connection to
(192.168.201.127:6066) from (192.168.201.128:35015)
Oct 28 16:42:34 localhost bwctld[3828]: FILE=sapi.c, LINE=510,
ControlSession([192.168.201.127]:6066) accepted from
userid(nil):([192.168.201.128]:35015)
Oct 28 16:42:38 localhost bwctld[3825]: FILE=endpoint.c, LINE=1310, PeerAgent:
Peer cancelled test before expected
Oct 28 16:42:50 localhost bwctld[3828]: FILE=endpoint.c, LINE=1310, PeerAgent:
Peer cancelled test before expected

Where should I look next?

Thanks,

Jeff