perfSONAR User Q&A and Other Discussion

["Andrew Lake" <>]

Hi Humberto,

That information is taken from the lookup service and it looks like your host is registered so it should be appearing. Is this after a perl-perfSONAR-graphs package update to 3.5 (formerly named perl-perfSONAR_PS-serviceTest) on your maddash host? do you recall if it was displaying before the update?

Thanks,

Andy

On Wed, Sep 30, 2015 at 2:18 PM, Humberto Galiza <> wrote:

Greetings folks,

Does anybody knows how do I configure my MADDash to show capacity and MTU settings? Currently, my dashboard test results show both items as "Unknown" even though I have tracepath and bwctl tests configured. Is there anything else that am I missing?

Example:
http://ps-dashboard.ampath.net/maddash-webui/details.cgi?uri=/maddash/grids/AmLight+LSST+-+TCP+BWCTL+Test+Between+LSST+Bandwidth+Hosts/ps-bw.ampath.ampath.net/190.103.184.117/Throughput+Alternate+MA

I'm running perfSonar v3.5 on all hosts, and they are part of a mesh config.
Tracepath test specifications:
<test_spec tracepath_test>
# Define a test spec for running traceroute tests every 10 minutes
type traceroute # Perform a traceroute test
tool tracepath # use tracepath
test_interval 900 # Run the test every 5 minutes
protocol udp # Run a UDP traceroute (could also be 'icmp')
timeout 30 # Wait 30 seconds
pause 0 # Number of seconds to pause between each traceroute probe
waittime 5 # Number of seconds to wait for a response before assuming its lost
first_ttl 0 # The initial value for the TTL
max_ttl 64 # The maximum value for the TTL
packet_size 40 # The size of the packets (not include IP/UDP headers)
force_bidirectional 1
</test_spec>

I appreciate your help. Thanks in advance,

Humberto Galiza ..::.. AmLight - Americas Lightpaths
E-mail:
P:+1 (786) 288-3367
M:+55 (19) 971-445-570
Skype:humbertogaliza