perfSONAR User Q&A and Other Discussion

[Christian Johannesen <>]

/usr/bin/bwping -s 10.117.2.51 -c 10.117.2.50 -T ping -4 -v -N 10 -l
1000 -i 1
Messages being sent to syslog(user,err)
bwping: Outbound connection to (perfsonar.one.com:4823) from
(perfsonar.one.com:59143)
bwping: Outbound connection to (PerfSensor0001.one.com:4823) from
(perfsonar.one.com:42095)
bwping: Using 10.117.2.51 as the address for remote sender
bwping: Using 10.117.2.50 as the address for remote receiver
bwping: Available in-common: ping owamp
bwping: Using tool: ping
bwping: Server '10.117.2.50' accepted test request at time 1441978584.286799
bwping: Client '10.117.2.51' accepted test request at time 1441978584.286799
bwping: 21 seconds until test results available

SENDER START
bwctl: start_endpoint: 3650967378.876306
bwctl: run_endpoint: receiver: 10.117.2.50
bwctl: run_endpoint: sender: 10.117.2.51
bwctl: exec_line: ping -c 10 -i 1.000000 -W 1 -s 1000 -I 10.117.2.51
10.117.2.50
bwctl: run_tool: tester: ping
bwctl: run_tool: receiver: 10.117.2.50
bwctl: run_tool: sender: 10.117.2.51
bwctl: start_tool: 3650967384.286922
PING 10.117.2.50 (10.117.2.50) from 10.117.2.51 : 1000(1028) bytes of data.
1008 bytes from 10.117.2.50: icmp_seq=1 ttl=64 time=0.358 ms
1008 bytes from 10.117.2.50: icmp_seq=2 ttl=64 time=0.326 ms
1008 bytes from 10.117.2.50: icmp_seq=3 ttl=64 time=0.330 ms
1008 bytes from 10.117.2.50: icmp_seq=4 ttl=64 time=0.253 ms
1008 bytes from 10.117.2.50: icmp_seq=5 ttl=64 time=0.311 ms
1008 bytes from 10.117.2.50: icmp_seq=6 ttl=64 time=0.321 ms
1008 bytes from 10.117.2.50: icmp_seq=7 ttl=64 time=0.316 ms
1008 bytes from 10.117.2.50: icmp_seq=8 ttl=64 time=0.329 ms
1008 bytes from 10.117.2.50: icmp_seq=9 ttl=64 time=0.334 ms
1008 bytes from 10.117.2.50: icmp_seq=10 ttl=64 time=0.336 ms

--- 10.117.2.50 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9000ms
rtt min/avg/max/mdev = 0.253/0.321/0.358/0.030 ms
bwctl: stop_tool: 3650967393.288763
bwctl: stop_endpoint: 3650967393.288763

SENDER END


On 09/11/2015 03:21 PM, Andrew Lake wrote:
> 
> /usr/bin/bwping -s 10.117.2.51 -c 10.117.2.50 -T ping -4 -v -N 10 -l
> 1000 -i 1