|
Hey Michael,
Cheers,
Aaron
On May 4, 2015, at 2:03 PM, Aaron Brown <> wrote:
Ok, I see what’s going on (reproduced it locally). I’ll have a fix for you to test a little bit.
Cheers,
Aaron
On May 4, 2015, at 1:51 PM, Pennington, Michael <> wrote:
From what it looks like when restarting it on a reboot, fakewww just never actually starts after perfsonar boots up:
Stopping web100srv: [ OK ]
Stopping fakewww: [FAILED]
Starting web100srv: [ OK ]
Starting fakewww: [ OK ]
Mike Pennington
Network Engineer
Connecticut Education Network (CEN)
860-622-4566
www.cen.ct.gov
CEN Conference May 15th 2015 in Hartford. Register now- http://bit.ly/1MmRn9Z
-----Original Message-----
From: Pennington, Michael
Sent: Monday, May 04, 2015 1:25 PM
To: 'Aaron Brown'
Cc: Remsik,Robert; ; ;
Subject: RE: [perfsonar-user] [perfsonar-announce] NDT 3.7.0 Now Available
Sure - what's the easiest way to get this over to you? I've rebooted all of my perfsonar boxes multiple times and it happens every time so pretty easy to reproduce with a reboot.
-----Original Message-----
From: Aaron Brown [mailto:]
Sent: Monday, May 04, 2015 1:16 PM
To: Pennington, Michael
Cc: Remsik,Robert; ; ;
Subject: Re: [perfsonar-user] [perfsonar-announce] NDT 3.7.0 Now Available
Hey Michael,
Would it be possible to get the output from when NDT is initially started during boot?
Cheers,
Aaron
On May 4, 2015, at 1:08 PM, Pennington, Michael <> wrote:
Thanks. I was going to mention that running those steps fixed my issue as well, but when you reboot the issue comes back so on every reboot those steps need to be completed.
Mike Pennington
Network Engineer
Connecticut Education Network (CEN)
860-622-4566
www.cen.ct.gov
CEN Conference May 15th 2015 in Hartford. Register now-
http://bit.ly/1MmRn9Z
-----Original Message-----
From:
[mailto:] On Behalf Of
Remsik,Robert
Sent: Monday, May 04, 2015 1:02 PM
To:
Cc: ; ;
Subject: Re: [perfsonar-user] Re: [perfsonar-announce] NDT 3.7.0 Now
Available
For me, I made a bash script that's run by rc.local upon reboot. I'm running RC code though so I'm not certain this applies to the latest code available by yum. Mine still says that NDT is not running but the NDT site still functions.
-----
#!/bin/bash
service ndt stop
service httpd stop
service httpd start
service ndt start
-----
And, yes, thank you guys very much. :)
Robert Remsik
Colorado State University
On Mon, 2015-05-04 at 09:12 -0500, Casey Russell wrote:
Group,
In case others run into the same problem I had after the
auto-updates this weekend. After the NDT updates were applied, my
local services page showed NDT "Not Running". The service had been
running on Friday (albeit with the older, broken NDT).
I tried going to the "Enabled Services" page and simply clicking
"Save" to restart all of the running services, but this had no affect.
NDT was still stuck in a "Not Running" state. I finally took a cue
from the announcement email sent over the weekend and restarted the
services by hand. I first ran "service ndt restart" and then
"service httpd restart" on each of the affected boxes, and everything
returned to normal, and our boxes are now running the updated version.
Thanks to the development team for what appears to be a much improved
NDT.
Casey Russell
Network Engineer
Kansas Research and Education Network
2029 Becker Drive, Suite 282
Lawrence, KS 66047
(785)856-9820 ext 9809
On Mon, May 4, 2015 at 7:41 AM, Aaron Brown <>
wrote:
Hey Roderick,
That error shouldn’t be a problem. I’ll put a fix in to avoid
it in the future though.
Cheers,
Aaron
On May 4, 2015, at 3:15 AM, Roderick Mooi <>
wrote:
Hi Aaron
I got this error on two of our servers (the rest worked
fine):
Non-fatal POSTIN scriptlet failure in rpm package
ndt-server-3.7.0-8.el6.x86_64
web100srv is stopped
fakewww is stopped
chown: cannot access `/var/log/ndt/fakewww*log': No such file or
directory
warning: %post(ndt-server-3.7.0-8.el6.x86_64) scriptlet failed, exit
status 1
Please advise.
Thanks,
Roderick
On 01 May 2015, at 10:00 PM, Aaron Brown <>
wrote:
Hi All,
We would like to announce the availability of NDT version
3.7.0 This is a major new release, that contains, among other
things:
- Adds support for Java 8 to the java client
- Adds a WebSockets-based client, allowing modern web browsers to
perform NDT tests without requiring the use of any plugins
- Includes a substantially redesign of the Web GUI
- Support for using Apache instead of ‘fakewww’
- Improves the security of fakewww for those who still use it
A source tarball is available
at http://software.internet2.edu/sources/ndt/ndt-3.7.0.tar.gz
You can find RPMs at the Internet2 RPM repository at
http://software.internet2.edu/ . Existing users that have
auto-updates configured should download the changes in the next 24
hours. Those without auto-updates can run 'yum update' by hand to
get the latest version. To use Apache instead of fakewww, install
the package ‘ndt-server-apache’ using yum, and run “service ndt
restart” and “service httpd restart”.
Thanks again to all our testers and those that provided feedback.
If you have any questions or concerns, please direct them to
Cheers,
Aaron
--
This message is subject to the CSIR's copyright terms and
conditions, e-mail legal notice, and implemented Open Document
Format (ODF) standard.
The full disclaimer details can be found at
http://www.csir.co.za/disclaimer.html.
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.
Please consider the environment before printing this email.
--
Robert Remsik
Academic Computing and Networking Services Colorado State University
(970) 491 7120
|
