perfSONAR User Q&A and Other Discussion

["Pennington, Michael" <>]

Log attached, it's super small though.

NDT version:

rpm -qa | grep ndt
ndt-3.6.5.2-6.el6.x86_64
ndt-client-3.6.5.2-6.el6.x86_64
ndt-server-3.6.5.2-7.x86_64


Mike Pennington
Network Engineer
Connecticut Education Network (CEN)
860-622-4566
 
www.cen.ct.gov


-----Original Message-----
From: Jason Zurawski 
[mailto:]
 
Sent: Tuesday, December 02, 2014 1:40 PM
To: Pennington, Michael; Jeremy Palmer
Cc: 

Subject: Re: [perfsonar-user] Network Diagnostic Tester (NDT) service keeps 
dying on 3.4.1 toolkit host, web100srv not running

Hey Guys;

I guess the best thing to start off would be sending 
'/var/log/ndt/web100srv.log’, it may not have what we need though.  Also send 
the version of NDT you are using, e.g.
 
> [zurawski@localhost
>  ~]$ rpm -qa | grep ndt
> ndt-3.6.5.2-6.el6.x86_64
> ndt-client-3.6.5.2-6.el6.x86_64
> ndt-server-3.6.5.2-6.el6.x86_64

Thanks;

-jason

On Dec 2, 2014, at 1:11 PM, Pennington, Michael 
<>
 wrote:

> I've noticed the same thing on my end, I just restart it and it seems fine 
> as well.  Sometimes for a day or two, sometimes for a week or two.  Haven't 
> looked into it, but you aren't alone.
> 
> Mike
> 
> Mike Pennington
> Network Engineer
> Connecticut Education Network (CEN)
> 860-622-4566
> 
>  
> www.cen.ct.gov
> 
> 
> -----Original Message-----
> From: 
> 
>  
> [mailto:]
>  On Behalf Of Jeremy Palmer
> Sent: Tuesday, December 02, 2014 1:06 PM
> To: 
> 
> Subject: [perfsonar-user] Network Diagnostic Tester (NDT) service keeps 
> dying on 3.4.1 toolkit host, web100srv not running
> 
> Ever since upgrading my toolkit hosts to 3.4.1, the NDT service randomly 
> stops running (shows as "Not Running" on the toolkit homepage). If you try 
> to run a NDT test, it gives the error "Server process not running: Start 
> web100srv process on remote server".
> When I restart the NDT service, I always get the following:
> 
> # service ndt restart
> Stopping web100srv:                                        [FAILED]
> Stopping fakewww:                                          [  OK  ]
> Starting web100srv:                                        [  OK  ]
> Starting fakewww:                                          [  OK  ]
> 
> Once I restart it, it seems to run fine for a few days but eventually dies 
> again. This seems to be occurring randomly on all of my 3.4.1 toolkit 
> hosts. I don't see anything of note in the /var/log/web100srv.log file.
> 
> Anyone else having this issue or have any ideas on how to troubleshoot it?
> 
> --
> Jeremy Palmer
> Senior Network Engineer
> ViaWest, Inc.
> Office: 720.891.1045
> Fax: 303-874-5236
> http://www.viawest.com

Attachment: web100srv.log
Description: web100srv.log