perfSONAR User Q&A and Other Discussion

[Andrew Lake <>]

Hi,

Unfortunately ping results don't display on the graph yet. They will display on the graphs as a separate line in rc3 which should be available in the next couple weeks. Sorry for the inconvenience in the meantime. 

Thanks,

Andy

On Aug 21, 2014, at 5:35 PM, Zhi-Wei Lu <> wrote:

Hi all,

 

We are testing with the new perfSonar 3.4rc2 and we encountered a few bumps along the way.  In this test box, we configured owamp test and it was working.  We then setup traceroute and regular “Ping Test”, these two tests failed.  I found out that the problem was the chosen interface “p1p1”, perfSonar complains about:

 

'bwping: Unable to connect to p1p1',

'bwtraceroute: Unable to connect to p1p1',

 

By changing the interface from “p1p1” to “default”, traceroute started to work, but ping still failed.  The failing “ping” test was found out to be “-s 1000” problem, by reducing the size to 995, it worked!  This problem is probably due to a departmental firewall (outside of our control).

 

The log file show ping result, but I could not see the result in the “Throughput/Latency Graphs”, I then disabled owamp and I still can not see result.  Shall I delete the old owamp results?

 

Thank you.

 

Zhi-Wei Lu

IET-CR-Network Operations Center

University of California, Davis

(530) 752-0155