perfSONAR User Q&A and Other Discussion

["Niederberger, Ralph" <>]

Sorry, you are right. I do not know why I didn't find it in the index this 
morning.

Thanks

Ralph 

> -----Ursprüngliche Nachricht-----
> Von: Verena Venus 
> [mailto:]
> Gesendet: Mittwoch, 1. Juli 2009 11:38
> An: Niederberger, Ralph
> Cc: 
> 
> Betreff: Re: [perfsonar-user] Searching for iperf 2.0.2.
> 
> Hi again,
> 
> I have to correct myself: RPMforge has iperf-2.0.2 packages, I just found
> them
> in the index. So, the information in the Admin Guide is correct.
> 
> Regards,
> Verena
> 
> Am Mittwoch 01 Juli 2009 11:06:11 schrieb Verena Venus:
> > Hi Ralph,
> >
> > it seems that the iperf project isn't maintained that well, so it is a
> bit
> > difficult to find things.
> >
> > However, you can download the sources for 2.0.2 there. Click on
> "downloads"
> > and then click on iperf to get several versions of source tarballs.
> There's
> > the 2.0.2 tarball available
> >
> > RPMforge does not have an iperf-2.0.2 package, but most of the other
> > dependencies needed, that's why it is mentioned there. You are not
> forced
> > to use this repository, it is just a recommendation to ease the
> > installation process. RPM packages can be obtained from other sources as
> > well. You can e.g. use RPM Search (http://rpm.pbone.net/) to find
> packages
> > from different download sources and install them by hand. RPM Search
> lists
> > quite some iperf-2.0.2 packages, so maybe there is one for your system,
> > too.
> >
> > Hope this helps,
> > Verena
> >
> > Am Mittwoch 01 Juli 2009 10:49:12 schrieb Niederberger, Ralph:
> > > Dear all,
> > >
> > > just tried to start deploying BWCTL MP.
> > >
> > > The perfSONAR Administrator's Guide: perfSONAR MDM 3.1 (last updated
> > > 05-05-09), Manual Version 1.5, Document Code GN2-08-057 states at page
> 60
> > > that iperf software can be obtained from
> > > http://sourceforge/projects/iperf and it proposes to use iperf version
> > > 2.0.2 instead of 2.0.4 because of an error within the new release. But
> > > unfortunately there are only downloads for 2.0.0 or 2.0.4.
> > >
> > > It also states that RPM packages are available at RPMforge at
> > > https://rpmrepo.org/RPMforge. Unfortunately I cannot find any iperf
> > > software at this location.
> > >
> > > Is there an update for the documentation needed?
> > >
> > > Could someone give me a hint, where to look?
> > >
> > > Best regards
> > >
> > > Ralph
> > >
> > > ----------------------------------------------------------------------
> ---
> > >-- ---------------------
> > > ----------------------------------------------------------------------
> ---
> > >-- --------------------- Forschungszentrum Juelich GmbH
> > > 52425 Juelich
> > > Sitz der Gesellschaft: Juelich
> > > Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
> > > Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
> > > Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
> > > Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr. Harald Bolt,
> > > Prof. Dr. Sebastian M. Schmidt
> > > ----------------------------------------------------------------------
> ---
> > >-- ---------------------
> > > ----------------------------------------------------------------------
> ---
> > >-- ---------------------
> 
> --
> Verena Venus, DFN-Labor
> Friedrich-Alexander-Universität Erlangen-Nürnberg
> Regionales RechenZentrum Erlangen (RRZE)
> Martensstraße 1, 91058 Erlangen, Germany
> Tel. +49 9131 85-28738, -28800, Fax +49 9131 302941
> 
> 
> www.win-labor.dfn.de