perfsonar development work

["" <>]

Hi Tassio,

To what service are you sending this message?

Regards,
Murilo

Tassio Vale escreveu:
> Hello everybody,
>
> I'm using the request message below:
>
> <nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/"; 
> xmlns:nmwgt="http://ggf.org/ns/nmwg/topology/2.0/"; 
> xmlns:bwctl="http://ggf.org/ns/nmwg/tools/bwctl/2.0/"; 
> type="MeasurementRequest" id="msg1">
>   <nmwg:metadata id="metabase">
>     <bwctl:subject id="sub1">
>       <nmwgt:endPointPair>
>         <nmwgt:src type="ipv4" value="mp1.pop-ba.rnp.br" />
>         <nmwgt:dst type="ipv4" value="mp1.pop-sc.rnp.br" />
>       </nmwgt:endPointPair>
>     </bwctl:subject>
>     <nmwg:eventType>http://ggf.org/ns/nmwg/tools/bwctl/2.0</nmwg:eventType>
>     <bwctl:parameters id="param1">
>       <nmwg:parameter name="protocol">UDP</nmwg:parameter>
>     </bwctl:parameters>
>   </nmwg:metadata>
>   <nmwg:metadata id="metarecv" metadataIdRef="metabase">
>     <bwctl:parameters>
>       <nmwg:parameter name="role">receiver</nmwg:parameter>
>     </bwctl:parameters>
>   </nmwg:metadata>
>   <nmwg:metadata id="metasend" metadataIdRef="metabase">
>     <bwctl:parameters>
>       <nmwg:parameter name="role">sender</nmwg:parameter>
>     </bwctl:parameters>
>   </nmwg:metadata>
>   <nmwg:data id="receiver" metadataIdRef="metasend" />
>   <nmwg:data id="sender" metadataIdRef="metarecv" />
> </nmwg:message>
>
> But returns the request message below:
>
> <nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/"; id="msg1_resp" 
> messageIdRef="msg1" type="MeasurementResponse">
>   <nmwg:metadata id="resultCodeMetadata_0">
>     <nmwg:eventType>error.mp.clmp.system.tool_response</nmwg:eventType>
>   </nmwg:metadata>
>   <nmwg:metadata id="resultCodeMetadata_1">
>     <nmwg:eventType>error.mp.clmp.system.tool_response</nmwg:eventType>
>   </nmwg:metadata>
>   <nmwg:data id="resultDescriptionData_for_resultCodeMetadata_1" 
> metadataIdRef="resultCodeMetadata_1">
>     <nmwgr:datum xmlns:nmwgr="http://ggf.org/ns/nmwg/result/2.0/";>The tool 
> returned no response data. This might be caused by a wrong parameter syntax 
> or this tool might not be available at the server.</nmwgr:datum>
>   </nmwg:data>
>   <nmwg:data id="resultDescriptionData_for_resultCodeMetadata_0" 
> metadataIdRef="resultCodeMetadata_0">
>     <nmwgr:datum xmlns:nmwgr="http://ggf.org/ns/nmwg/result/2.0/";>The tool 
> returned no response data. This might be caused by a wrong parameter syntax 
> or this tool might not be available at the server.</nmwgr:datum>
>   </nmwg:data>
> </nmwg:message>
>
> I change the protocol parameter to "udp" but returns the same error. If 
> parameter = "TCP", the response returns OK. What the problem?
>
> Best regards,
>
> Tassio Vale.
>