perfsonar development work

["Tassio Vale" <>]

Hello everybody,

 

I'm using the request message below:

 

<nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/" xmlns:nmwgt="http://ggf.org/ns/nmwg/topology/2.0/" xmlns:bwctl="http://ggf.org/ns/nmwg/tools/bwctl/2.0/" type="MeasurementRequest" id="msg1">
  <nmwg:metadata id="metabase">
    <bwctl:subject id="sub1">
      <nmwgt:endPointPair>
        <nmwgt:src type="ipv4" value="mp1.pop-ba.rnp.br" />
        <nmwgt:dst type="ipv4" value="mp1.pop-sc.rnp.br" />
      </nmwgt:endPointPair>
    </bwctl:subject>
    <nmwg:eventType>http://ggf.org/ns/nmwg/tools/bwctl/2.0</nmwg:eventType>
    <bwctl:parameters id="param1">
      <nmwg:parameter name="protocol">UDP</nmwg:parameter>
    </bwctl:parameters>
  </nmwg:metadata>
  <nmwg:metadata id="metarecv" metadataIdRef="metabase">
    <bwctl:parameters>
      <nmwg:parameter name="role">receiver</nmwg:parameter>
    </bwctl:parameters>
  </nmwg:metadata>
  <nmwg:metadata id="metasend" metadataIdRef="metabase">
    <bwctl:parameters>
      <nmwg:parameter name="role">sender</nmwg:parameter>
    </bwctl:parameters>
  </nmwg:metadata>
  <nmwg:data id="receiver" metadataIdRef="metasend" />
  <nmwg:data id="sender" metadataIdRef="metarecv" />
</nmwg:message>

 

But returns the request message below:

 

<nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/" id="msg1_resp" messageIdRef="msg1" type="MeasurementResponse">
  <nmwg:metadata id="resultCodeMetadata_0">
    <nmwg:eventType>error.mp.clmp.system.tool_response</nmwg:eventType>
  </nmwg:metadata>
  <nmwg:metadata id="resultCodeMetadata_1">
    <nmwg:eventType>error.mp.clmp.system.tool_response</nmwg:eventType>
  </nmwg:metadata>
  <nmwg:data id="resultDescriptionData_for_resultCodeMetadata_1" metadataIdRef="resultCodeMetadata_1">
    <nmwgr:datum xmlns:nmwgr="http://ggf.org/ns/nmwg/result/2.0/">The tool returned no response data. This might be caused by a wrong parameter syntax or this tool might not be available at the server.</nmwgr:datum>
  </nmwg:data>
  <nmwg:data id="resultDescriptionData_for_resultCodeMetadata_0" metadataIdRef="resultCodeMetadata_0">
    <nmwgr:datum xmlns:nmwgr="http://ggf.org/ns/nmwg/result/2.0/">The tool returned no response data. This might be caused by a wrong parameter syntax or this tool might not be available at the server.</nmwgr:datum>
  </nmwg:data>
</nmwg:message>

 

I change the protocol parameter to "udp" but returns the same error. If parameter = "TCP", the response returns OK. What the problem?

 

Best regards,

 

Tassio Vale.