perfsonar development work

[Loukik Kudarimoti <>]

Hey Maxim,

Any progress on this? Did you try the installer after adding ant 
executable to your PATH variable?

Loukik.


Loukik Kudarimoti wrote:
> Hi Maxim,
>
> Thanks for your input. We are looking into enhancing the install.pl to 
> do some basic dependency checks.
>
> The cause for the first error is not clear to us yet. It looks like 
> the installer is not able to find ant (i.e., ant is not in the PATH 
> environment variable). Can you confirm that when you type ant at the 
> prompt, it actually calls on ant?
>
> The cause for the second error *might* be that you asked it to do the 
> deploy step straight away (in the advanced installation). Let us know 
> if this is not the case. If you choose to go for the advanced 
> installation, you need to go through steps 1, 2 and 3 in sequence 
> (i.e. first pre-install, then configure, then deploy)
> (see: 
> http://wiki.perfsonar.net/jra1-wiki/index.php/PerfSONAR_v2.0#Advanced_Installation) 
>
>
>
>
> maxim wrote:
> >  Hello,
> > I've tried to install perfosnar-bundle from the websiteand it seems like
> > intall.pl script is broken ( and in many places ).
> > -------------
> > first place (while installing SQL MA and trying to go 'Basic'):
> > ..................
> > perfSONAR-SQL-MA-1.3/perfsonar/src/objects.config
> > perfSONAR-SQL-MA-1.3/perfsonar/src/obs.pl
> >
> > Continuing with installation...
> > Which installation type do you want?
> > 1. Basic
> > 2. Advanced
> > Please choose a number [enter to exit]: 1
> >
> > Starting installation for service SQL MA...
> >
> >
> > It seems an error occurred in one of the installation steps.
> > Would you like to try that step again?
> > (yes [y] or [yes] to try, anything else goes back to the installation 
> > menu):
> >
> > Welcome to the perfSONAR services installer.
> > ---------------
> > What kind of error ???? Why ???? what should I do ????
> > ------------
> > OK, trying again and going with already downloaded  
> > perfSONAR-SQL-MA-1.3.
> >
> > 3. Use
> > /mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/pe 
> >
> > rfsonar/
> >
> > Please choose a number [enter to exit]: 3
> >
> > Continuing with installation...
> > Which installation type do you want?
> > 1. Basic
> > 2. Advanced
> > Please choose a number [enter to exit]: 2
> >
> > Available actions: 1. pre-install
> > 2. configure
> > 3. deploy
> > 4. test
> > 5. undeploy
> > 6. enable/disable verbose
> > 7. restart script
> > 0. exit
> > Please choose a number: 3
> >
> > Executing action deploy...
> >
> > cat:
> > /mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/pe 
> >
> > rfsonar/ant/const.properties: No such file or directory
> > cat:
> > /mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/pe 
> >
> > rfsonar/ant/const.properties: No such file or directory
> > cat:
> > /mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/pe 
> >
> > rfsonar/ant/const.properties: No such file or directory
> > cp: cannot stat
> > `/mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/p 
> >
> > erfsonar/ant/const.properties': No such file or directory
> >
> > An error occurred when trying to copy the file const.properties to 
> > the directory where the service was installed. The directory used 
> > was: //WEB-INF/classes/perfsonar/conf/ This file is copied so that it 
> > can be used in future modifications to the service through the use of 
> > this script. I recommend that you copy the file
> > /mnt/disk1/home/netadmin/LHCOPN/perfsonar-bundle-2.0/perfSONAR-SQL-MA-1.3/pe 
> >
> > rfsonar/ant/const.properties to the mentioned directory (or to the 
> > right one if the path detected of the service's WEB-INF directory is 
> > wrong). Press any key to continue...
> >
> > -------------------
> > The same problem exists for RRD MA as well:
> >  
> >
> > while installing RRD MA, its trying to copy
> > ./perfSONAR-RRD-MA-2.2/perfsonar/ant/const.properties file somwhere.
> > The problem is that there is no such file, but there is a file
> > ./perfSONAR-RRD-MA-2.2/perfsonar/ant/const.properties.ma.
> > Of course the installation is got broken at this point.
> > Another more complex question. How to reconfigure current perSONAR 
> > service
> > installed on tomcat 5.0.28 as a single SQL MA service
> > with definition inside of catalina.properties config file into server 
> > with
> > support for multiple perSONAR services.
> > I need to run SQL MA, RRD MA and LS on the single tomcat.
> > Or, please update your installation instructions on the website and 
> > include
> > examples how tomcat config files should look like.
> > Also, I need an example how to reconfigure cuurently used eXist to 
> > use with
> > more than one services ( if its necessary).
> >  Thanks,
> >            Maxim Grigoriev.
> >            Fermilab
> >
> >