ndt-users - AW: Sudden problem using NDT-3.5.14
Subject: ndt-users list created
List archive
- From: "Galuschka Christoph" <>
- To: <>
- Subject: AW: Sudden problem using NDT-3.5.14
- Date: Wed, 10 Feb 2010 15:06:44 +0100
Well, seems I (partly) solved my problem regarding the SEGVAULT of ndt-3.5.14.
I moved back to 3.5.13, and no more SEGVAULT...
cheers
Christoph
-----Ursprüngliche Nachricht-----
Von: Galuschka Christoph
Gesendet: Montag, 08. Februar 2010 13:35
An:
''
Betreff: WG: Sudden problem using NDT-3.5.14
Running the web100srv-process with multiple -d I only get the following:
>>
ANL/Internet2 NDT ver 3.5.14
Variables file = /usr/local/ndt/web100_variables
log file = /usr/local/ndt/web100srv.log
Debug level set to 9
Send buffer initialized to 16384, Receive buffer initialized to 87380
server ready on port 3001
web100_init() read 69 variables from file
Generated iflist with device=eth2 and if_speed=7
nothing in queue
Timer not running, waiting for new connection
New connection received, waiting for accept() to complete
Signal 11 received by process 11469
DEBUG, caught SIGSEGV signal and terminated process (11469)
>>
So I get a SEGVAULT. Memtest allready completed without errors. Any ideas
what else it could be? I allready rebootet the server and also tried another
kernel ton o avail.
Thanks
Christoph
------------------------------------------------
Ing. Christoph Galuschka
TIWAG-Tiroler Wasserkraft AG
Bereich IT/Betrieb und Services
Eduard-Wallnöfer-Platz 2
6010 Innsbruck
T: +43 (0)50607 21832
F: +43 (0)50607 41832
www.tiroler-wasserkraft.at
------------------------------------------------
Firmenbuchgericht Innsbruck, FN 44133b
Sitz der Gesellschaft: Innsbruck
DVR: 0164089
-----Ursprüngliche Nachricht-----
Von: Galuschka Christoph
Gesendet: Montag, 08. Februar 2010 09:27
An:
Betreff: Sudden problem using NDT-3.5.14
Hello,
I'm having a sudden problem with my NDT-Installation (v3.5.14).
The server has been running fine for a few weeks, and suddenly I get the
following error:
Snipet from JAVA-Client (same with the windows-client)
>>
TCP/Web100 Network Diagnostic Tool v3.5.14
click START to begin
** Starting test 1 of 1 **
Connecting to 'netperf.tiwag.at' [netperf.tiwag.at/10.100.1.80] to run test
Connected to: netperf.tiwag.at -- Using IPv4 address
Information: The server does not support this command line client
>>
After this message, the web100 process dies.
I did nothing to the system, no OS-patches or whatever. I also can't get you
information from the logfiles, since web100srv.log shows no information on
why the process fails.
Any ideas?
Thanks and best regards
Christoph
- WG: Sudden problem using NDT-3.5.14, Galuschka Christoph, 02/08/2010
- AW: Sudden problem using NDT-3.5.14, Galuschka Christoph, 02/10/2010
Archive powered by MHonArc 2.6.16.