ndt-users list created

["Galuschka Christoph" <>]

Running the web100srv-process with multiple -d I only get the following:
>>
ANL/Internet2 NDT ver 3.5.14
        Variables file = /usr/local/ndt/web100_variables
        log file = /usr/local/ndt/web100srv.log
        Debug level set to 9

Send buffer initialized to 16384, Receive buffer initialized to 87380
server ready on port 3001
web100_init() read 69 variables from file
Generated iflist with device=eth2 and if_speed=7
nothing in queue
Timer not running, waiting for new connection
New connection received, waiting for accept() to complete
Signal 11 received by process 11469
DEBUG, caught SIGSEGV signal and terminated process (11469)
>>
So I get a SEGVAULT. Memtest allready completed without errors. Any ideas 
what else it could be? I allready rebootet the server and also tried another 
kernel ton o avail.

Thanks
Christoph

------------------------------------------------
Ing. Christoph Galuschka

TIWAG-Tiroler Wasserkraft AG
Bereich IT/Betrieb und Services
Eduard-Wallnöfer-Platz 2
6010 Innsbruck
T: +43 (0)50607 21832
F: +43 (0)50607 41832
www.tiroler-wasserkraft.at
------------------------------------------------
Firmenbuchgericht Innsbruck, FN 44133b
Sitz der Gesellschaft: Innsbruck
DVR: 0164089


-----Ursprüngliche Nachricht-----
Von: Galuschka Christoph 
Gesendet: Montag, 08. Februar 2010 09:27
An: 

Betreff: Sudden problem using NDT-3.5.14

Hello,

I'm having a sudden problem with my NDT-Installation (v3.5.14).
The server has been running fine for a few weeks, and suddenly I get the 
following error:
Snipet from JAVA-Client (same with the windows-client)
>>
TCP/Web100 Network Diagnostic Tool v3.5.14
click START to begin

** Starting test 1 of 1 **
Connecting to 'netperf.tiwag.at' [netperf.tiwag.at/10.100.1.80] to run test
Connected to: netperf.tiwag.at  --  Using IPv4 address
Information: The server does not support this command line client
>>
After this message, the web100 process dies.

I did nothing to the system, no OS-patches or whatever. I also can't get you 
information from the logfiles, since web100srv.log shows no information on 
why the process fails.

Any ideas?

Thanks and best regards
Christoph