ndt-users list created

[Richard Carlson <>]

Hi Martyn;

This indicates that the server is operating properly.  The email I sent a 
few minutes ago should address the start-up problem (use the "-l" flag to 
indicate that you want to move the log file to a new location).

At 05:55 AM 10/13/2005, Martyn Cheatle wrote:
> update, If I remove my wireless card after at least 10 seconds then the 
> test completes, does this help towards solving my issue?

Its not clear to me what you are saying here.  Which host has the wireless 
card (the NDT server or the client)?  If it's the server then what 
interface (wired or wireless) is primary (use the netstat -nr command)?

Rich

> Martyn
>
> click START to re-test
> Checking for Middleboxes . . . . . . . . . . . . . . . . . .  Done
> running 10s outbound test (client to server) . . . . . 318.73Kb/s
> running 10s inbound test (server to client) . . . . . . 9.71kb/s
> Your PC is connected to a Cable/DSL modem
>
>
> ----------
> From: Martyn Cheatle 
> [mailto:]
> Sent: 13 October 2005 10:23
> To: 
>
> Subject:
>
> After a bit learning cure and the help of users from this list I'm getting 
> there, I just have one problem now which is as follows: -
>
> If I edit start.ndt I have a problem starting it, I have added a log line 
> at the end of the websrv100 see below
>
> #! /bin/csh -f
>
> set cnt = `ps auxw | grep web100srv | grep -v grep | wc -l`
> if ($cnt == 0) then
>         /usr/local/sbin/web100srv -a /var/log/web100/web100srv.log >& 
> /dev/null &
> endif
>
> set cnt = `ps auxw | grep fakewww | grep -v grep | wc -l`
> if ($cnt == 0) then
>         /usr/local/sbin/fakewww -l/var/log/fakewww.log >& /dev/null &
> Endif
>
> Then when I run start.ndt I get the following
>
> [root@localhost
>  conf]# ./start.ndt
> 'nknown option: `-
> Usage: csh [ -bcdefilmnqstvVxX ] [ argument ... ].
>
> But if I leave it and do not edit it then it starts fine, I used 
> Microsoft's WordPad to edit the file.
>
> Also I have added the following to my firewall rules using webmin but I'm 
> unable to run any tests from server to client, it just sits there doing nothing
>
> iptables -A NDT -p tcp --dport 7123 -j ACCEPT
> iptables -A NDT -p tcp --dport 3001 -j ACCEPT
> iptables -A NDT -p tcp --dport 3002 -j ACCEPT
> iptables -A NDT -p tcp --dport 3003 -j ACCEPT
> iptables -A NDT -p tcp --sport 3001 -j ACCEPT
> iptables -A NDT -p tcp --sport 3002 -j ACCEPT
> iptables -A NDT -p tcp --sport 3003 -j ACCEPT
>
> Anybody got any ideas on how can solve my issues
>
> Many thanks
>
> Martyn
>
>
> The contents of this email and any attachments are sent for the personal 
> attention
> of the addressee(s) only and may be confidential. If you are not the intended
> addressee, any use, disclosure or copying of this email and any attachments is
> unauthorised - please notify the sender by return and delete the message. Any
> representations or commitments expressed in this email are subject to 
> contract.
>
> ntl Group Limited
>
>
> The contents of this email and any attachments are sent for the personal 
> attention
> of the addressee(s) only and may be confidential. If you are not the intended
> addressee, any use, disclosure or copying of this email and any attachments is
> unauthorised - please notify the sender by return and delete the message. Any
> representations or commitments expressed in this email are subject to 
> contract.
>
> ntl Group Limited

------------------------------------



Richard A. Carlson                              e-mail: 

Network Engineer                                phone:  (734) 352-7043
Internet2                                       fax:    (734) 913-4255
1000 Oakbrook Dr; Suite 300
Ann Arbor,  MI  48104