Hi Aaron
the problem with applet for me was related with old java version
(1.6). After changing to newer one (1.7) I haven't noticed any non
working tries (tested many times and all worked ok). Is it possible
that people who tested it have also similar issue?
Regards
Sebastian
On 09.12.2014 16:50, Aaron Brown wrote:
Hey Sebastian,
We can do an initial -rc release, but “regularly
doesn’t work for no apparent reason” is definitely a show
stopper for the final release.
Cheers,
Aaron
On Dec 7, 2014, at 11:56 PM, Sebastian Kostuch
<>
wrote:
Hi Aaron
I have tested java applet using these RPMs and it turned
out that sometimes it didn't work (using fakewww),
however I wasn't able to find reason for such behaviour.
Besides, for me it worked almost all the time, only few
times I have problem with running tests (no errors, it
just stopped working).I guess it may be something with
fakewww as only using it I have noticed such sporadic
problems. But, again, it worked almost all the time
after all. Is it that what blocks us from releasing NDT
now or are there any other tasks which should be
completed before it could happen?
Regards
Sebastian
On 02.12.2014 18:43, Aaron
Brown wrote:
Hey Sebastian,
Cheers,
Aaron
On Dec 2, 2014, at 8:38 AM,
Sebastian Kostuch <>
wrote:
Hi
Aaron
would it be helpful if you will send me this
RPM and I will try if it works ok on my
system?
Regards
Sebastian
On 01.12.2014
20:15, Aaron Brown wrote:
Hey Sebastian,
I wanted to make sure it
wasn’t somehow a problem with the RPM I
built as opposed to the two different
client systems that have tried it so far.
Cheers,
Aaron
On Nov 28, 2014, at 7:02
AM, Sebastian Kostuch <>
wrote:
Hi Aaron,
currently not but if needed then I
can try to make some host public so
you will have access. However I'm
wondering what exactly will you be
able to verify this way? The problem
with applet not working sometimes is
related to which OS, web browser and
java version client uses, so will
hosting page on another system make
any differences? Please correct me
if I have not understood your
question right way :)
Regards
Sebastian
On
25.11.2014 16:37, Aaron Brown
wrote:
Hey Sebastian,
Do you have a
publicly accessible host that I
can test again? I’m wondering if
it’s some kind of OS X problem.
Cheers,
Aaron
On Nov 24, 2014,
at 4:41 AM, Sebastian
Kostuch <>
wrote:
Hi
again
after further
investigation I have
noticed that the problem
on linux is related with
bug in these versions of
java (based on discussion
here). When I
installed older version as
suggested there (7u67) I
was finally able to
successfully run applet.
Again, running it multiple
times resulted in working
ok all the time so I
wasn't able to reproduce
bug.
What is current status of
releasing NDT? Are there
any things left that
should be done before we
can do it?
Regards
Sebastian
On
21.11.2014 17:36,
Sebastian Kostuch wrote:
Hi
Aaron
I have tried to
reproduce bug with java
applet working randomly
(on widget.html site).
What I have noticed is
that on linux systems
(tried on Ubuntu 14.04
and Fedora 20) I wasn't
able to successfully run
test using applet and
got warning that plugin
was not loaded properly
and when I removed
catching JS exception
from script.js file then
it was " Liveconnect
call for Applet ID [id]
is not allowed in this
JVM instance" which is
java security issue
(unless I have added
site hosting it to
exceptions list). It's
odd that using windows
and same security
settings I didn't have
such error (java version
8u25, on linux I have
tried with the same
version and 7u72 also).
However it resulted in
working all the time on
windows and not working
all the time on linux,
wasn't able to reproduce
it the way you have
mentioned. It would be
helpfull to know what
exactly versions of java
they were using and what
system/browser.
Regards
Sebastian
On
17.11.2014 21:12,
Aaron Brown wrote:
Hey Pawel,
On
Nov 17, 2014, at
10:51 AM, Paweł
Gesek <>
wrote:
Ok,
thanks for
clearing that
up Aaron. As
for the init
script, if we
would decide
to split the
rpms, I
believe we
would either
have to have
the RPMs
conflict, or
create a
separate base
rpm(ndt-server-base)
which would
contain
scripts, html,
fakewww, the
daemon, etc.
Then have two
ndt-server
rpms for just
the binaries,
depending on
the base
package. The
daemon would
detect which
version is
installed and
it could be
manually
configured if
both were
present. That
would probably
be the
simplest
route(aside
from having
them
conflict), but
as you say,
there is no
web10g rpm so
thats for the
future.
That’s more the
division I was
thinking of:
ndt-server-common
(init scripts,
fakewww,
flashpolicyd,
etc.),
ndt-server-web100
(web100srv),
ndt-server-web10g
(web10gsrv). Allow
both -web100 and
-web10g RPMs to be
installed, and
have the existing
“ndt-server” RPM
become a
meta-package that
grabs
ndt-server-web100
and
ndt-server-common.
Another option
would be to have
“ndt-server” have
web100srv, and
have it depend on
ndt-server-common.
Upgrades would
then work as
expected.
Cheers,
Aaron
Regards,
Paweł
On 11/17/2014
03:22 PM,
Aaron Brown
wrote:
Hi Pawel,
On
Nov 17, 2014,
at 8:19 AM,
Paweł Gesek
<>
wrote:
Aaron,
I've noticed
that with the
new web10g
userlands the
RPM will fail
to build,
since
genplot10g is
not mentioned
in the spec
file. I am
assuming this
means that the
rpms being
built for
distribution
will not
contain the
web10g
binaries,
since it
passed on the
build system.
Correct, there
is no
dependency for
the RPM on
web10g-userland.
I
am wondering
whether this
is ok for now,
or should we
include the
web10g stuff
in the RPM
distribution.
I think that
both web100
and web10g
binaries can
be packaged
together and
the version
used by the
daemon can be
controlled by
a
configuration
variable.
Another option
is to create a
separate
ndt-server-web10g
RPM for
web10g, since
the web10g
binaries do
require the
latest
userlands as a
dependency.
What is your
opinion on
this?
Since no one
is
distributing
RPMs for the
web10g
userland
(AFAIK), I’d
prefer to
leave well
enough alone
for -rc1. If
we did support
it, i’d prefer
splitting RPMs
similar to how
you noted,
though, so
that folks
without
web10g-userland
RPMs could
install just
the
web100-dependent
package, and
vice versa.
I’m not sure
how the init
script
situation
would work
though.
Cheers,
Aaron
Regards,
Paweł
On 11/14/2014
08:53 PM,
Aaron Brown
wrote:
Hey Sebastian,
I
think with my
commit to the
Issue162
branch, the
RPM is now in
reasonably
good shape.
One bit of
oddity, and
it’d be good
if someone
else could try
building the
RPM and
testing. When
we installed
it here, the
java applet
would seem to
switch
randomly
between
“working” and
“failing”, and
it wasn’t
clear why it
would do it.
We’ve had two
different
folks see this
same issue.
Cheers,
Aaron
On
Nov 14, 2014,
at 10:20 AM,
Sebastian
Kostuch <>
wrote:
Hi
Aaron,
I have made
some changes
to this page.
Now buttons
are moved on
top of the
site, also I
have added
proper info
message there
and when
plugin is not
loaded
properly and
user clicks
start button
then error
message will
be shown and
test would not
be started.
Also I have
made plugin
show only as a
small bar.
Please let me
know if new
version of
this page
looks ok for
you :)
Regards
Sebastian
On
14.11.2014
13:44, Aaron
Brown wrote:
Hey Sebastian,
The
problem comes
in with flash
blockers,
which are
pretty common,
especially
among network
engineers.
I’ve attached
a screenshot
of what I see
when I go to
the page, and
click “Use
Flash”. It’s
completely
unclear to me
that I need to
hit anything
other than
“Start Test”.
However, if I
click “Start
Test”, it will
bomb out in a
bizarre
fashion,
because I
haven’t
clicked on the
flash applet
below the
buttons to get
around the
flash blocker,
and since I
can’t scroll
the page at
all, I can’t
even see that
there is
something for
me to click. I
just have to
blindly click
in that box
that’s below
the blue page,
and I’m given
no guidance to
do that.
Beyond that,
it’s rather
jarring to
have both
appear in that
page. If we
could shrink
the applet
down so that
it’s a very
small bar, and
specifically
note the
“flash block”
issue in the
text somewhere
(especially if
they click
“Start Test”,
and it bombs
out), that’d
be vastly more
intuitive.
If
you want to
try to see the
issue for
yourself,
install a
flash blocker
in Chrome or
FF, and then
navigate to
http://desk179.internet2.edu:7123/
and select
“Use Flash”.
Cheers,
Aaron
<Mail
Attachment.png>
On
Nov 14, 2014,
at 6:23 AM,
Sebastian
Kostuch <>
wrote:
Hi
Aaron,
I'm not sure I
understand you
correctly. The
purpose of
this site is
to provide the
user JS UI and
the ability to
choose which
client (java
or flash)
should be used
as backend
right? But
this client
itself is not
supposed to be
used directly
here as the
GUI written in
HTML + JS does
the whole
work. If we
want to
provide user
these clients
direct then we
have separated
pages for it
(tcpbw100 and
tcpbw100-java).
So what about
hiding these
controls on
the
widget.html
site so that
only JS UI
will be
visible? Or am
I missing
something and
it should work
different way?
Also for
ensuring: by
writing that
it worked you
mean JS UI or
running flash
client located
on the bottom
of the site?
Kind regards
Sebastian
On
13.11.2014
15:43, Aaron
Brown wrote:
Hey Sebastian,
Ah
ok. I’ve got
Flash Block on
the browsers
so the applet
did load, but
because of how
the page
loads, wasn’t
visible so I
didn’t realize
I needed to
click on it
first. Once I
clicked on
that, it
worked. Given
the prevelance
of flash
blockers, and
the odd nature
of this HTML5
+ Flash combo,
is there a
better way
that we can
better locate
the actual
Applet on the
page itself so
that, and put
some text in,
letting folks
know they may
need to click
on the hidden
flash applet
first?
Cheers,
Aaron
On
Nov 13, 2014,
at 9:36 AM,
Sebastian
Kostuch <>
wrote:
Hi
Aaron,
as Pawel
mentioned
there is
currently
problem with
calling applet
functions from
JS as from
java 7u45
update there
are more
security
restrictions
to applets.
You can read
more about it
here.
Basically now
it is
necessary to
add
Caller-Allowable-Codebase
line to
manifest file
(which I have
already
commited) and
jar file must
be signed by a
trusted CA.
When it comes
to issues you
have
mentioned, is
there also
problem with
calling start
directly from
applet or
flash embedded
on the same
site where JS
UI is? Are
there any
errors?
Kind regards
Sebastian
On
13.11.2014
15:20, Aaron
Brown wrote:
Hey Pawel,
On
Nov 13, 2014,
at 9:11 AM,
Paweł Gesek
<>
wrote:
Aaron,
I've taken a
look and
talked with
Sebastian
about this.
The new page
uses the
applet by
default if
your browser
supports java,
however there
is some sort
of problem
with the
_javascript_-applet
communication,
making the
gauges do
nothing if you
are using the
applet. Have
you tried
pressing the
flash button
below in order
to switch the
client to
flash?
It doesn’t
matter what I
use, both bomb
out, and don’t
(as far as i
can tell
anyway)
perform any
tests.
One
question
regarding your
changes, any
reason to
change
nobase_ndt_DATA
to ndt_DATA in
HTML5-frontend/Makefile.am?
Without the
nobase
modifier
HTML5-frontend/images
and
HTML5-frontend/fonts
get installed
in /usr/ndt
without the
fonts or
images
subdirectory,
which leads to
missing
resources on
the webpage.
The install
had failed as
is, and as
part of my
monkeying, i’d
removed it,
and then
forgot about
it when it
didn’t fix the
issue. It’s
been restored
in my latest
commit.
Cheers,
Aaron
Regards,
Paweł
On 11/12/2014
05:04 PM,
Aaron Brown
wrote:
Hey Pawel,
I
couldn’t get
the RPM to
build using
mock, so I
committed some
changes so I
could build
the RPM.
However, after
installing the
RPM, going to
the web and
hitting start,
it doesn’t
seem to do
anything for
me. Navigating
to the flash
client
directly,
however, does
seem to work.
Cheers,
Aaron
On
Nov 12, 2014,
at 8:53 AM,
Paweł Gesek
<>
wrote:
I've
added the
flashpolicyd
script with
some small
modifications
to the NDT
repository. It
is started by
the ndt daemon
and can be
disabled in
the sysconfig
file in the
same way as
the fakewww
daemon.
I believe I am
finished with
the RPM work,
the changes
are on the
branch
"Issues162".
Please review
and let me
know if I
missed
something or
you feel
something
needs to be
changed.
Regards,
Paweł
On 11/07/2014
04:14 PM,
Paweł Gesek
wrote:
Great,
I'll look at
packaging that
script with
NDT. I assume
we should
bundle it with
the ndt-server
rpm. I'm also
thinking that
we can handle
this in a
similar
fashion we do
with fakewww -
the ndt daemon
will handle
starting and
stopping of
that script.
Is that okay?
It's possible
I missed
fakewww, I'll
take a look
and make sure
its consistent
with httpd. As
for
widget.html it
allows
switching
between the
applet and
flash client.
Regards,
Paweł
On 11/07/2014
03:42 PM,
Aaron Brown
wrote:
That script
looks
reasonable. As
long as it can
be reasonably
be packaged
with NDT, I’d
be fine with
it.
Cheers,
Aaron
On
Nov 7, 2014,
at 8:15 AM,
Jordan
McCarthy <>
wrote:
-----BEGIN PGP
SIGNED
MESSAGE-----
Hash: SHA512
For what it's
worth, the
M-Lab platform
uses the
second
approach,
embodied in
this file:
https://github.com/m-lab-tools/ndt-support/blob/master/flashpolicyd.py
If this code
looks
reasonable to
you all,
please feel
free to use
it!
Jordan
Jordan
McCarthy
Open
Technology
Institute |
New America
Foundation
Public Key:
0xC08D8042 |
4A61 3D39 4125
127D 65EA DDC2
BFBD A2E9 C08D
8042
On 11/07/2014
04:46 AM,
Paweł Gesek
wrote:
Hello
everyone,
I have been
looking at
updating the
NDT RPM so
that the flash
client there
works out of
the
box(Issue162
<https://code.google.com/p/ndt/issues/detail?id=162>).
I've
committed
changes to the
branch
Issue162(https://code.google.com/p/ndt/source/detail?r=1144),
which
make the
HTML5-frontend
install with
NDT and
changed the
index page
in the apache
configuration
to the new
widget.html.
As far as
running the
Flash client
out of the box
goes, the NDT
server has to
expose the
crossdomain.xml
file, which is
required
for the Flash
client to
allow opening
sockets to the
server.
Unfortunately
the socket
policy does
not go through
HTTP, but a
simple
proprietary
protocol that
uses the TCP
port 843. I am
wondering for
the best way
to handle this
in the NDT
rpm. We can
possibly add a
requirement
for a package
like
https://code.google.com/p/flashpolicyd/
and use that
to serve the
file. We could
also consider
bundling some
sort of a
simple server
script(like
this
https://github.com/xantus/mojo-websocket-examples/blob/master/script/flash-policy-server)
that would
serve the
policy file.
Do you
preferences on
how to resolve
this?
Regards, Paweł
-----BEGIN PGP
SIGNATURE-----
Version: GnuPG
v1.4.11
(GNU/Linux)
iQEcBAEBCgAGBQJUXMYFAAoJEL+9ounAjYBCzD4IAKkSGdqsimCHWyD0ZdQcdD7W
wXH7emXDbO7z2jSojcNSKGqQe6wLPWFsQPN5PPwQqYdTs8bigxaKb7wGNC3qNBD5
B2FJ1Ohle10Et2NW20m+TCoORSQiYjpGCI+UenhbiV5B57BBE3t8cRgpHtxOiHjc
c2zxelECxdHq5eZ7f1JvAxWqdhUJZNVbWr7uIVGggcwe/b5Vg0yq9cqzIaVEX/bL
t9PEeYdzmmNq8ctjfKzgNEjNQo3Sp9O29nFB70KR9YNXvf0bOupJ76msI+FbRWaV
iOhgbCzfyHuHcTxQuHfxtUm5mf03cJ0QDWP5qFgTJPQSFrPYB5h4uENuMcgxKRw=
=bfO0
-----END PGP
SIGNATURE-----
|
